WELDING PROCEDURE SPECIFICATIONS (WPS)
Section IX, ASME Boiler & pressure Vessel Code
Page 1 of WPS: JRY - 02 CS
‘Company Name: Date: 14 October 2019
Welding Procedure Specification Id: JRY-02 CS
Supporting POR Id: JRY - 02 €S.
Welding Process: “GTAW
[JOINTS (QW-402) Single Vee, Nil backing
8 Cy
wt z
fi 1
G
JOINT DETAIL:
wt 554mm G: 4mm
e: 60 fe Imm
BASE METALS (QW-403}
Material Spec: ASTM A106 Grade B
P.No: 1 Group No: 1 to P.No: 1 Group No: 1
THICKNESS RANGE:
‘Wall thicknes: 1.6-s11.08mm Pipe di
Deposited weld metal - Groove : <11.08mm
Range - Groove: all
FILLER METALS (QW-404) ROOT (GTAW) FILL & CAP (GTAW)
Weld Metal Analysis A-No: 1 1
Size of Filler Metal: 2.4mm 2.4mm
Filler Metal F.No: 6 6
‘SFA Specification: 518 518
‘AWS Specification: ER705-6 ER70S-6
Deposited Weld Metal: 2.5mm 25mm
POSITION (QW-405):
Position of Groove: all Weld Progression: Uphill if Vertical
PREHEAT (QW-406):
Preheat Temp: Ambient if 10°C Interpass Temp: 220°C Maximum
POSTWELD HEAT TREATMENT (QW-407)
Temperature: As per applicable code ‘Time Range:WELDING PROCEDURE SPECIFICATIONS (WPS)
Section IX, ASME Boiler & pressure Vessel Code
Page 2 of wPS: JRY -02 CS
GAS (QW-408): GASIES) MIXTURE %_ FLOW RATE
Shielding (GTAW): ‘Argon 99.9 33 min
ELECTRICAL CHARACTERISTICS (QW-409):
ROOT (GTAW) HOT PASS, FILL & CAP (GTAW)
Current: oc pc
EN EN
95 120
: 2 2
TECHNIQUE (QW-41 :
Travel Speed: Manual Wirefeed speed: NA
Oscillation: None String or Weave: String and Weave
Single or Multiple Electrodes: single Multipass or Single Pass: ‘Multipass
Oriface or Gas Cup NA Initial /interpass cleaning: _ Grinder ang Wire brush
Weld | Process Filler Metal Polarity | Amp Volt Travel
Layers Class Diameter | type | range range speed
GTAW.
Manual
WELDERS NAME: JACOB RYBURN WELDERS ID: T1812-19
ADDRESS:
WELDING SUPERVISED BY: Amida f : 27 October 2019
WELD TESTS CONDUCTED BY: x S4fon es TESTREPORTID: 13781 C1
25 October 2019