Republic of the Philippines
Department of Science and Technology
INDUSTRIAL TECHNOLOGY DEVELOPMENT INSTITUTE
(Formeriy National Institute of Science and Technology)
STANDARDS AND TESTING DIVISION
Gen, Santos Ave., Bicutan, Taguig, Metro Manila 1631
Fax No.: (632) 837-31-67 / 837-00-32 Tel. Nos. 837-20-71 to 82
local 2188, 2189
TEST REPORT
No. ITDI-PPT-2011-0871
Customer's Name ERP Philippines Corporation
Address (orth Science Ave., LTI, Bi
Sample Code
Sample
Description ‘ark Unit No.1;
Unit No.l; Si
1 Seal Pot; D!
DE-ZN Fines Repulp Tank Seal Pot;
MS Vent Header Seal Pot; HS.
Identification, N/A
Date Received: July 13, 2011
Date(s) Tested > July 15-18, 2011
Standard |
Deviation
on
064
"SCRUBBER 2 1 3 7 oa7_|
SCRUBBER [aia 1 3 | 087
DE-ZN Reactof No.1| 21.2 1 6 | 056
DE-ZN ReactofNo.2| _20.7x z 36 7 035
|DE-ZN Fines Repulp| _20.6x 8.81 206 29.6 1.08
DE-ZN VentHeader| _20.3x 7.27 215 12.6 0.50
MS Vent Header | 21.0% 8.31 206 9.73 0.66
HLS Destruction | 210x924 | 209 33.5 1.08
Speed of Testing, mm/min.: 3.84
Support Span Length,mm: 144
No. of Replicate test: 5
Test Method: ASTMD790
‘This report consists of 2 page(s) and may not be reproduced except in full. No, ITDI-PPT-2011-0871.odt
7/21/2011 Page 1 of 2
geRepublic ofthe Philippines
Department of Science and Technology
"INDUSTRIAL TECHNOLOGY DEVELOPMENT INSTITUTE
(Formerly National Institute of Science and Technology)
STANDARDS AND TESTING DIVISION
Gen. Santos Ave., Bicutan, Taguig, Metro Manila 1631
Oui
Fax No. (632) 837-31-67 / 837-00-32 ‘Tel. Nos. 837-20-71 to 82
local 2188, 2189
quoted solely for the
verified by this Laboratory. This report is not to be used
promotion.
eg
rome
OIC, Physical
Testing Labor:
‘This report consists of 2 page(s) and may not be reproduced exceptiin full No, ITDI-PPT-2011-0871.odt
TV2V/2011 Page 2 of 2Republic ofthe Philippines
Department of Science and Technology
INDUSTRIAL TECHNOLOGY DEVELOPMENT INSTITUTE
(Formerly National Institute of Science and Technology)
STANDARDS AND TESTING DIVISION
Gen, Santos Ave., Bicutan, Taguig, Metro Manila 1631
ax No.: (632) 837-31-67 / 837-00-32 ‘Tel. Nos. 837-20-71 to 82
Tocal 2188, 2189
TEST REPORT
No. ITDI-PPT-2011-0831
Customer's Name: FRP Philippines Corporation
Address : Science Ave., LTI, Bid
‘Sample Code
Sample
‘Description. ‘eal Pot; PRE- Unit No.2
Pot; Scrubbe it No.2
1 Seat Pot;-DI (0.2 Seal Pot
DE-ZN Fines Repulp Tank Seal Pot; der Drain Pot
MS Vent Header Seal Pot; H,S Di Pot
Identification: N/A
Date Received : July 7, 2011
Date(s) Tested > July 13, 2011
PRENIRL PRENIRL SCRUBBER SCRUBBER
No. No.2 No.l No2
Mean Tensile 141 140 119 110
rr 10.4
1.68 1.42
0.13 0.16
10.3 10.8
1.07 7 2.08
i 20.7 20. 20.8 20.2
73 9 8.94
Note: No. of s 2 2
outside .
DE: E DEZN
Reactor actor No. Fines Repulp
Mean Tensile Strength, MPa 127 115 123
Standard Deviation 15.9 32.0 16.9
Mean Elongation at Break, % 1.60 1.47 1.64
Standard Deviation 0.21 0.28 0.16
‘Mean Tensile Modulus, GPa 10.7 9.40 8.39
Standard Deviation 1.53 2.85 0.77
‘Mean Width, mm 20.6 20.5 19.6
Mean Thickness, mm. 742 8.10 3.46
Note: No. of samples that break 2 2 a
outside gage length.
‘This report consists of 2 page(s) and may not be reproduced except in full. No, ITDI-PPT-2011-0831.odt
7/21/2011 Page 1 of 2
yrRepublic of the Philippines
‘Department of Science and Technology
INDUSTRIAL TECHNOLOGY DEVELOPMENT INSTITUTE
(Formerly National Institute of Science and Technology)
STANDARDS AND TESTING DIVISION
Gen, Santos Ave., Bicutan, Taguig, Metro Manila 1631
Pax No. (682) 837-3167 /837-00-32 Tel, Nos, 837-20-71 10 82
Tocal 2188, 2189
DE-ZN MS ms
Destruction
Seal Pot
Mean Tensile 125
Standard ( 15.5
Mean Elong: a 1.55
Standard Deviation 0.16
‘Mean Tensile Modulus, GPa 10.5
Standard Deviation 1.56
Mean Width, mm. 196
Mean Thickness, mm . 7.74
Note: No. of samples 3
VALIDITY 01 REI test res obtained:abithe time of the test
and pertain only to the by this ‘odes rds in italics are
quoted solely for the customer's reference; si ese codes and words arc not
verified by this Laboratory. ort is not advertising, purposes or sales
promotion.
og.
ADELAIPA G. SENICA
OIC, Physical and Performance
Testing Laboratory
Issued under the Authority of:
fs
HERMELINA H. BION
Chief, STD
This report consists of 2 page(s) and may not be reproduced except in fall. No, ITDI-PPT-2011-0831.odt
7/2V2011 Page 2 of 2