You are on page 1of 1

CHECKLIST FOR MOTOR VEHICLE AND HEAVY VEHICLE INSPECTION

PROJECT LOCATION: DATE:

Vehicle No. Vehicle type:

Driver name_______________________________________ Date of insp. ___/____/____ Due date of insp. ___/____/____


1 2 3 4 5 6 7
CHECKED & APPROVED
S# CHECKLIST REFERENCE VALUE REMARKS
CONT PMC CLIENT

1 Is the operator have adequate licence required to drive the


vehicle?
2 Is the brakes operative ?

3 Is backup alarms working and audible ?

4 Is the seal belt available for all sitting position and serviceable ?

5 Is the safety helmet available for all sitting position ?

6Is the horn functional ?

7Is the fire extinguisher available ?

8 Is the lights properly working ?


(High & low HEAD / TAIL / EMERGENCY / BACK UP /
TURNSIGNALS / PARKING / BRAKE / LICENSE PLATE)
9 Are the windshield wipers present and in good condition ?

10 Is the windshield free from cracks that impair vision ?

11 Are the tyres in a good condition and sufficient air pressure in it ?

12 Is the excessive noise or smoke coming from exhaust ?

13 Is the rear view mirrors is serviceable ?

14 Is the fuel tank is free from leaks ?

15 Is the Delay start alarm properly working?

16 Motor Vehicle/ heavy equipment is fit for use ?

INSTRUCTION TO FILL: Safety is everyone's responsibility.


Column # 3 = Any reference value to be recorded PMC & Client may wish to check on random basis
Column # 4,5,6 = initials Only after the satisfactory work done the columns to be signed
dd/mm/yy
Column # 7 = Any Discrepancy/ Issues Recorded/ Drawing reference

You might also like