You are on page 1of 1
Chapter 2 INSTRUMENTS AND CONTROLS Pos. | __ Illustration Description Function Aa Operating hour —_| Shows the machine's number of Ie] meter operating hours. ASa Road lights No function has been allocated to FE this key ASD Flashing direction | No function has been allocated to | indicators this key ‘Ase Battery charging | Illuminates if the battery is not lamp being charged due to a faully gen- erator or fault in the electrical sys- tem. Asa Control lamp engine Illuminates red if the oil pressure oil pressure is too low (e.g. cil level too low). Immediately switch off the engine. ‘An acoustic warning will sound 4 minutes after the red lamp illumi- nates. ‘Ga Controllamp, engine _lluminates red if the coolant level coolant level is too low. Let the engine run at idling speed for a few minutes and then switch it off. An acoustic warning will sound at the same lime.Caution: Let the engine cool down before checking the coolant level. Also observe the "engine cil temperature" warning (A1). A6b Control lamp emer-__Illuminates red when the emer- gency STOP gency STOP button (A11) is pressed Abc Control lamp illuminates red if the hydraul hydraulic oil temper- _ temperature is too high. Immedi- ature ately stop the paver. Let the engine run at a medium speed with the machine at a standsiil to coo! down the hydraulic ol 28 Track Paver Titan 225/325

You might also like