Professional Documents
Culture Documents
ANALOG CALIPERS
DIGITAL CALIPERS
600 80 30 30 1800 200 60 -
700 90 40 40 2000 220 60 -
The maximum permissible errors (G) are defined by the equations set out below; the values
obtained must be rounded to two decimals.
These values are valid for measurements made without inversion of the measuring force.
For all other types of measurements, including those performed with depth rods, the values
obtained must be increased by 20 μm.
Vernier calipers with dial or nonius with the value of a division 0.01 0.05 mm:
G = (20 + 1/10 mm) μ ≥ 50 μm.
Code € Measurement field (mm) Noses length (mm) Resolution (mm) Noses type
F051820008 -,-- 앳 80 25 0,1 standard
F051820010 -,-- 앳 100 25 0,1 standard
F051820080 -,-- 앳 80 20 0,1 for interiors and exteriors
F051820100 -,-- 앳 100 20 0,1 for interiors and exteriors
Code € Measurement field (mm) Noses length (mm) Resolution (mm) Depth rod Locking type
F050040100 -,-- 앳 0÷100 25 0,05 rectangular upper screw
DIN
INOX
862
€ Measurement field
Code (mm)
Noses length (mm) Resolution (mm) Error limit (mm) Depth rod Locking type
F055250005 -,-- 쏆 0÷150 40 0,05 0,05 rectangular combined
705