The document summarizes findings from testing a smart door lock. It notes issues with the door not locking immediately after opening, the touchpad LED staying on too long when the door is open, needing different beep patterns to indicate various states like wrong password or finger, pausing after 3 wrong attempts, needing low battery and open door alarms, and setting the open door alarm cycle.
The document summarizes findings from testing a smart door lock. It notes issues with the door not locking immediately after opening, the touchpad LED staying on too long when the door is open, needing different beep patterns to indicate various states like wrong password or finger, pausing after 3 wrong attempts, needing low battery and open door alarms, and setting the open door alarm cycle.
The document summarizes findings from testing a smart door lock. It notes issues with the door not locking immediately after opening, the touchpad LED staying on too long when the door is open, needing different beep patterns to indicate various states like wrong password or finger, pausing after 3 wrong attempts, needing low battery and open door alarms, and setting the open door alarm cycle.
1. Door doesn't lock before 20 seconds after opening.
>> whenever door sensor energized door have to closed immediately 2. Touchpad LED always stays on when the door is open >> After 5-10 seconds should be off until touch again 3. Short beep (2 or 3 types) for the followings: >> wrong password >> Wrong finger >> Valid Finger, Password >> Wrong input three times >> Door open, close >> Setting mode 4. pause for 2 minutes (changeable from settings) after 3 wrong attempt 5. Low battery alarm 6. When door remain open for more than 5 minutes generate alarm (repeat the cycle)