Professional Documents
Culture Documents
Casio PX-S1000 Connection Guide PDF
Casio PX-S1000 Connection Guide PDF
PX-S1000
Bluetooth, Audio Device,
and Computer Connection Guide
Contents
Using the Digital Piano as a Bluetooth Speaker System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EN-1
External Input Volume Adjustment and Center Cancel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EN-2
Playing Sound from External Audio Equipment Through the Digital Piano’s Speakers . . . . . . . . . . . . . . . . . . . . . . . . . . . .EN-3
Outputting Digital Piano Notes Through an Amp or Audio Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EN-3
Connecting to a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .EN-4
• Whenever you connect any device to the Digital Piano, be sure to read the user documentation that comes with
the device.
Using the Digital Piano as a Bluetooth Speaker System
This Digital Piano can be used as a Bluetooth speaker system. After you pair the Digital Piano with an external device that is
Bluetooth audio capable, you can output playback from the external device through the Digital Piano’s speakers.
• Before performing the pairing operation, turn down the volume levels of the Digital Piano and the external device.
• If external device notes that sound through the Digital Piano speakers are distorted, lower the external device’s volume
level setting.
1. On the Bluetooth setting screen that appears on the external device, turn on Bluetooth if it is off.
2. On the Digital Piano, hold down 3 FUNCTION as you press the D1 keyboard key. Keep 3 FUNCTION
depressed until step 4, below.
A0 C1 C2 C3 C4 C5 C6 C7 C8
D1
This causes the Digital Piano’s Bluetooth icon ( ) to flash, which indicates pairing standby.
• If the Digital Piano’s Bluetooth is turned off, it will turn on automatically at this point.
3. On the Bluetooth setting screen on the external device, select “CASIO Privia” (this Digital Piano).
• This completes pairing, which causes the Digital Piano’s Bluetooth icon ( ) to change from flashing to lit.
• Now output from the external device will sound from the Digital Piano’s speakers.
4. Release 3 FUNCTION.
• You need to perform the above procedure only once for a device. After that, turning on the Digital Piano’s and the device’s
Bluetooth will cause them to connect automatically.
• The Digital Piano can store pairing information for up to eight Bluetooth audio devices. Note, however, that only one device can
be connected to the Digital Piano at a time.
A0 C1 C2 C3 C4 C5 C6 C7 C8
E}1
EN-1
■ To clear Bluetooth connection logs
• Performing the procedure below will clear the connection logs (pairing information) of all Bluetooth audio devices that have been
paired with the Digital Piano. If you are experiencing connectivity problems with Bluetooth audio devices, perform the procedure
below and then perform the procedure under “To pair the Digital Piano with a Bluetooth audio device” (page EN-1).
• After performing the procedure below, you should also clear the Digital Piano connection logs from all of the Bluetooth audio
devices that have been paired with the Digital Piano. For information about how to do this, refer to the user documentation of
each Bluetooth audio device.
A0 C1 C2 C3 C4 C5 C6 C7 C8
C1 E1
4. Release 3 FUNCTION.
EN-2
Connection requires commercially available connecting cords,
Playing Sound from External supplied by you.
Audio Equipment Through the
Digital Piano’s Speakers
Audio amplifier AUX IN jacks, etc.
Pin plugs
Connection requires commercially available connecting cords,
supplied by you. RIGHT (Red)
• The connecting cords should have a 3-pole stereo mini plug LEFT (White)
on one end and a plug that matches the configuration of the
external device on the other end.
EN-3
■ Connecting the Digital Piano to Your Computer
Connecting to a Computer
You can connect the Digital Piano to a computer and
exchange MIDI data between them. You can send play data • Make sure you follow the steps of the procedure below
from the Digital Piano to music software running on your exactly. Connecting incorrectly can make data send
computer, or you can send MIDI data from your computer to and receive impossible.
the Digital Piano for playback.
• Never connect to a computer that does not conform to 5. Configure the music software settings to select
the above requirements. Doing so can cause problems “CASIO USB-MIDI” as the MIDI device.
with your computer. • For information about how to select the MIDI device,
see the user documentation that comes with the music
software you are using.
• For the latest news about supported operating systems,
visit the website at the URL or QR code below.
https://support.casio.com/global/en/emi/manual/PX-S1000/ • Be sure to turn on the Digital Piano first before starting
up your computer’s music software.
• USB send and receive is disabled during playback of a
song.
EN-4
PXS1000-E-2A-1
MA1902-A