Professional Documents
Culture Documents
2017.6.23
Overview
1. All-in-One firmware Version: v1.9.20
2. DJI GO app iOS Version: v3.1.11
3. DJI GO app Android Version: v3.1.5
What’s New
1. Updated No-Fly Zone Management.
2. For increased safety, the flight is restricted to a height of 30 m and distance of 50 m when not
connected or logged into the app during flight, including DJI GO and all apps compatible with DJI
aircraft.
Notes
Please note that firmware update may reset various Main Controller Settings, such as the RTH Altitude
and Maximum Flight Distance, to factory defaults. Before the update, take note of your preferred DJI
GO settings, and readjust them after the update to suit your preference.
DO NOT turn off the remote controller or exit the DJI GO app during the update process.
Overview
1. All-in-One firmware Version: v1.8.10
2. DJI GO app iOS Version: v3.1.2
3. DJI GO app Android Version: v3.1.1
What’s New
1. Optimized Flight Restriction Zone management by deleting flight restrictions for some abandoned
airports.
2. Slowed motor stopping time to three seconds during flight.
Notes
DO NOT turn off the remote controller or exit the DJI GO app during the update process.
Overview
1. All-in-One firmware Version: v1.7.90
2. DJI GO app iOS Version: v3.0.2
3. DJI GO app Android Version: v3.0.1
What’s New
1. Improved video downlink stability in high interference environments.
2. Fixed an Intelligent Battery auto restart issue occurring in cold environments.
Notes
DO NOT turn off the remote controller or exit the DJI GO app during the update process.
Overview
1. All-in-One firmware Version: v1.6.80
2. DJI GO app iOS Version: v2.8.0
3. DJI GO app Android Version: v2.8.0
What’s New
1. Improved aircraft stability through optimized flight controller logic.
2. Improved the video downlink reconnection speed during flight.
Notes
DO NOT turn off the remote controller or exit the DJI GO app during the update process.
Overview
1. All-in-One firmware Version: v1.5.70
2. DJI GO app iOS Version: v2.7.1
3. DJI GO app Android Version: v2.7.2
What’s New
1. Improved aircraft stability through optimized flight controller logic.
2. Optimized gimbal parameters.
Notes
DO NOT turn off the remote controller or exit the DJI GO app during the update process.
Overview
1. All-in-One firmware Version: v1.4.60
2. DJI GO app iOS Version: v2.7.1
3. DJI GO app Android Version: v2.7.0
What’s New
1. Optimized compass accuracy.
2. Fixed unprompted exits from HDR mode.
Notes
DO NOT turn off the remote controller or exit the DJI GO app during the update process.
Overview
1. All-in-One firmware Version: v1.3.50
2. DJI GO app iOS Version: v2.4.2
3. DJI GO app Android Version: v2.4.3
What’s New
1. Improved battery reliability when using the aircraft in cold environments.
2. Optimized battery management.
Notes
Users are advised to update all the Intelligent Flight Batteries with this All-in-One firmware.
DO NOT turn off the remote controller or exit the DJI GO app during the update process.
Overview
1. All-in-One firmware Version: v1.1.30
2. DJI GO app iOS Version: v2.2.0
3. DJI GO app Android Version: v2.1.0
What’s New
1. Added Intelligent Navigation Modes including Point of Interest, Follow Me and Waypoint.
2. Fixed issue of Wi-Fi extender failure to respond during the linking process.
3. Fixed issue of not being able to reset the Wi-Fi extender password from the DJI GO app.
4. Fixed issue of not being able to initiate the linking process from the DJI GO app.
5. Fixed issue of not being able to customize the control stick modes in the DJI GO app