Professional Documents
Culture Documents
Topic:‐ CSE_NHM_21JAN
1) The number of bricks required per cubic meter of brick masonry is?
पित घन मीटर ईं ट क िचनाई म िकतनी ईं ट क आव यकता होती है?[Question ID = 1][Question Description = Q1_SAMS_ER‐
CIVIL_MPNHM_2023]
1. 400 / 400 [Option ID = 1]
2. 450 / 450 [Option ID = 2]
3. 500 / 500 [Option ID = 3]
4. 550 / 550 [Option ID = 4]
Correct Answer :‐
500 / 500 [Option ID = 3]
पग िमल का पयोग िकस के िलए िकया जाता है ?[Question ID = 2][Question Description = Q2_SAMS_ER‐CIVIL_MPNHM_2023]
1. Weathering / अप य [Option ID = 5]
2. Tempering / टे प रंग [Option ID = 6]
3. Blending / सि मशण [Option ID = 7]
4. Burning / जलाना [Option ID = 8]
Correct Answer :‐
Tempering / टे प रंग [Option ID = 6]
3) Stone is placed along its natural bed so that the applied load is
प थर को उसके पाकृितक तल के साथ रखा जाता है तािक लागू भार हो[Question ID = 3][Question Description = Q3_SAMS_ER‐
CIVIL_MPNHM_2023]
1. Parallel to it / इसके समानांतर [Option ID = 9]
2. Normal to it / इसके सामा य [Option ID = 10]
3. at 45° to it / इसके िलए 45° पर [Option ID = 11]
4. at 30° to it / इसके िलए 30° पर [Option ID = 12]
Correct Answer :‐
Normal to it / इसके सामा य [Option ID = 10]
[Option ID = 13]
2. C2S / C2S
[Option ID = 14]
3. C3A / C3A
[Option ID = 15]
4. C4AF / C4AF
[Option ID = 16]
Correct Answer :‐
C3A / C3A
[Option ID = 15]
5) If p is the standard consistency of cement, the amount of water used in conducting the initial setting time test on
cement is
यिद p सीम ट क मानक ि थरता है, तो सीम ट पर पारंिभक सेिटंग समय परी ण करने म उपयोग िकए जाने वाले पानी क माता है[Question ID = 5]
[Question Description = Q5_SAMS_ER‐CIVIL_MPNHM_2023]
1. 0.65p / 0.65p [Option ID = 17]
2. 0.85p / 0.85p [Option ID = 18]
3. 0.6p / 0.6p [Option ID = 19]
4. 0.8p / 0.8p [Option ID = 20]
Correct Answer :‐
0.85p / 0.85p [Option ID = 18]
Correct Answer :‐
kankar / कंकर [Option ID = 21]
Correct Answer :‐
cubic meter / घन मीटर [Option ID = 25]
िकसी उपकरण या आि तयाँ के मू य म कमी को कहा जाता है[Question ID = 8][Question Description = Q8_SAMS_ER‐CIVIL_MPNHM_2023]
1. Saturation / संतृि [Option ID = 29]
2. Depreciation / मू यहास [Option ID = 30]
3. Negotiation / बातचीत [Option ID = 31]
4. Valuation / मू यांकन [Option ID = 32]
Correct Answer :‐
Depreciation / मू यहास [Option ID = 30]
िन न म 50 िममी मोटी कंकीट लो रंग का मापन िकया जाएगा[Question ID = 9][Question Description = Q9_SAMS_ER‐CIVIL_MPNHM_2023]
1. cubic meter / घन मीटर [Option ID = 33]
2. Kg / िकलोगाम [Option ID = 34]
3. Tonne / टन [Option ID = 35]
4. Sq.m / वग मीटर [Option ID = 36]
Correct Answer :‐
Sq.m / वग मीटर [Option ID = 36]
ह के इ पात का घन व होता है
[Option ID = 37]
2. 5850 kg/m3 / 5850 िकगा/m3
[Option ID = 38]
3. 7850 kg/m3 / 7850 िकगा/m3
[Option ID = 39]
4. 8850 kg/m3 / 8850 िकगा/m3
[Option ID = 40]
Correct Answer :‐
7850 kg/m3 / 7850 िकगा/m3
[Option ID = 39]
11) The length of long walls and short walls is to be found out at the centre line of the walls called
दीवार क कद रेखा पर खोजी जाने वाली लंबी दीवार और छोटी दीवार क लंबाई को कहा जाता है[Question ID = 11][Question Description =
Q11_SAMS_ER‐CIVIL_MPNHM_2023]
1. Long wall and short wall method / लंबी दीवार और छोटी दीवार िविध [Option ID = 41]
2. Crossing method / कॉिसंग िविध [Option ID = 42]
3. Centre line method / कद रेखा िविध [Option ID = 43]
4. Whole to part / समग से भाग [Option ID = 44]
Correct Answer :‐
Centre line method / कद रेखा िविध [Option ID = 43]
12) " The Lead and Lift " are the terms used in
Correct Answer :‐
Earthwork / अथवक [Option ID = 48]
Correct Answer :‐
Sq. m / वग मीटर [Option ID = 52]
िन निलिखत म से कौन सा बंधी यय लागत के अंतगत नह आता है?[Question ID = 14][Question Description = Q14_SAMS_ER‐
CIVIL_MPNHM_2023]
1. Establishment cost / थापना लागत [Option ID = 53]
2. Interest in investment / िनवेश म िच [Option ID = 54]
3. Cost due to theft / चोरी के कारण लागत [Option ID = 55]
4. Cost for rent and taxes / िकराए और कर के िलए लागत [Option ID = 56]
Correct Answer :‐
Cost due to theft / चोरी के कारण लागत [Option ID = 55]
15) In case of Line plan of building, the dimensions of __________measurements of the rooms are usually given in the plan
भवन क लाइन योजना के मामले म, क के __________ माप के आयाम आमतौर पर योजना म िदए जाते ह[Question ID = 15][Question
Description = Q15_SAMS_ER‐CIVIL_MPNHM_2023]
1. External / बाहरी [Option ID = 57]
2. Internal / आंत रक [Option ID = 58]
3. Centre line / कद रेखा [Option ID = 59]
4. None of these / इनमे से कोई भी नह [Option ID = 60]
Correct Answer :‐
Internal / आंत रक [Option ID = 58]
16) The most accurate estimate is
Correct Answer :‐
Detailed estimate / िव तृत अनुमान [Option ID = 64]
Correct Answer :‐
All of these / ये सभी [Option ID = 68]
18) The revised estimate will be prepared when original estimate is likely to exceed more than
मूल अनुमान से अिधक होने क संभावना होने पर संशोिधत अनुमान तैयार िकया जाएगा[Question ID = 18][Question Description = Q18_SAMS_ER‐
CIVIL_MPNHM_2023]
1. 5% / 5% [Option ID = 69]
2. 10% / 10% [Option ID = 70]
3. 12% / 12% [Option ID = 71]
4. 15% / 15% [Option ID = 72]
Correct Answer :‐
5% / 5% [Option ID = 69]
19) As per estimation specification, Subgrade of road shall be well consolidated and compacted each with a camber of
______.
अनुमान िविनदश के अनुसार, सड़क के सबगेड को अ छी तरह से समेिकत िकया जाएगा और प येक को ______ के कै बर के साथ कॉ पै ट िकया जाएगा
[Question ID = 19][Question Description = Q19_SAMS_ER‐CIVIL_MPNHM_2023]
1. 1 in 25 / 25 म1 [Option ID = 73]
2. 1 in 45 / 45 म1 [Option ID = 74]
3. 1 in 50 / 50 म1 [Option ID = 75]
4. 1 in 60 / 60 म1 [Option ID = 76]
Correct Answer :‐
1 in 60 / 60 म 1 [Option ID = 76]
Correct Answer :‐
20 cm × 10 cm× 10 cm / 20 सेमी × 10 सेमी × 10 सेमी [Option ID = 78]
Correct Answer :‐
Whole to part / समग से भाग [Option ID = 88]
शख
ंृ ला सव ण म ढलान के िलए संशोधन िन न के ारा िदया जाता है
[Option ID = 89]
2. 2h2/3L / 2h2/3L
[Option ID = 90]
3. 3h2/2L / 3h2/2L
[Option ID = 91]
4. h2/3L / h2/3L
[Option ID = 92]
Correct Answer :‐
h2/2L /h2/2L
[Option ID = 89]
Correct Answer :‐
Both Short measurements from the chain line and Ties or check lines which are perpendicular to the chain line / चेन लाइन और टाई या चेक लाइन से दोन लघु
माप जो चेन लाइन के लंबवत ह [Option ID = 96]
Correct Answer :‐
120° / 120° [Option ID = 98]
26) The process of turning the telescope in anticlockwise direction in Horizontal Plane is called:
टेिल कोप को ैितज सम ेत म वामावत िदशा म घुमाने क पिकया को कहा जाता है:[Question ID = 26][Question Description = Q26_SAMS_ER‐
CIVIL_MPNHM_2023]
1. Face Right observation / फेस राइट अवलोकन [Option ID = 101]
2. Face Left Observation / फेस ले ट पे ण [Option ID = 102]
3. Left Swing / ले ट ि वंग [Option ID = 103]
4. Right Swing / राइट ि वंग [Option ID = 104]
Correct Answer :‐
Left Swing / ले ट ि वंग [Option ID = 103]
[Option ID = 105]
2. d2/(7R) m / d2/(7R) m
[Option ID = 106]
3. 2d2/(7R) m / 2d2/(7R) m
[Option ID = 107]
4. d2/(28R) m / d2/(28R) m
[Option ID = 108]
Correct Answer :‐
d2/(14R) m / d2/(14R) m
[Option ID = 105]
28) Contour lines of different elevation unite to form one line in case of
िन न क ि थित म अलग‐अलग ऊंचाई क समो च रेखाएँ एक रेखा बनाने के िलए एकजुट होती ह[Question ID = 28][Question Description =
Q28_SAMS_ER‐CIVIL_MPNHM_2023]
1. Overhanging Cliff / ओवरहिगंग ि लफ [Option ID = 109]
2. Vertical Cliff / खड़ी च ान [Option ID = 110]
3. Knife edge Ridge / रु धार रीज [Option ID = 111]
4. None of these / इनमे से कोई भी नह [Option ID = 112]
Correct Answer :‐
Vertical Cliff / खड़ी च ान [Option ID = 110]
29) For the Survey of India , the instrument used for measuring bases was
भारतीय सव के िलए, आधार को मापने के िलए उपयोग िकया जाने वाला उपकरण था[Question ID = 29][Question Description = Q29_SAMS_ER‐
CIVIL_MPNHM_2023]
1. Jaderin’s Apparatus / जाडे रन उपकरण [Option ID = 113]
2. Hunter’s Short bases / हंटर के लघु आधार [Option ID = 114]
3. Colby Apparatus / को बी उपकरण [Option ID = 115]
4. Tellurometer / टेलरू ोमीटर [Option ID = 116]
Correct Answer :‐
Colby Apparatus / को बी उपकरण [Option ID = 115]
सीम ट कंकीट का संघनन कारक परी ण इसके िन न का िनधारण करता है[Question ID = 30][Question Description = Q30_SAMS_ER‐
CIVIL_MPNHM_2023]
1. Strength / बल [Option ID = 117]
2. Porosity / सरंधता [Option ID = 118]
3. Hardness / कठोरता [Option ID = 119]
4. Workability / यवहायता [Option ID = 120]
Correct Answer :‐
Workability / यवहायता [Option ID = 120]
31) For bars in compression the values of bond stress for bars in tension shall be increased by
संपीड़न म बार के िलए तनाव म बार के िलए पितबल बंधन के मू य म िन न से वृि होगी[Question ID = 31][Question Description =
Q31_SAMS_ER‐CIVIL_MPNHM_2023]
1. 25% / 25% [Option ID = 121]
2. 35% / 35% [Option ID = 122]
3. 50% /50% [Option ID = 123]
4. 0% / 0% [Option ID = 124]
Correct Answer :‐
25% / 25% [Option ID = 121]
आईएस 456 के अनुसार, कंकीट के िलए आंिशक सुर ा कारक है[Question ID = 32][Question Description = Q32_SAMS_ER‐
CIVIL_MPNHM_2023]
1. 0.87 / 0.87 [Option ID = 125]
2. 0.15 / 0.15 [Option ID = 126]
3. 1.15 / 1.15 [Option ID = 127]
4. 1.5 / 1.5 [Option ID = 128]
Correct Answer :‐
1.5 / 1.5 [Option ID = 128]
Correct Answer :‐
Copper and zinc / कॉपर और िजंक [Option ID = 129]
Correct Answer :‐
Powered chalk and raw linseed oil / पावड चाक और क चा अलसी का तेल [Option ID = 134]
35) Ring and ball apparatus is used for which of the following test of bitumen?
िबटुमेन के िन निलिखत म से िकस परी ण के िलए रंग और बॉल उपकरण का उपयोग िकया जाता है?[Question ID = 35][Question Description =
Q35_SAMS_ER‐CIVIL_MPNHM_2023]
1. Penetration / पवेश [Option ID = 137]
2. Viscosity / यानता [Option ID = 138]
3. Softening point / गलनांक [Option ID = 139]
4. Ductility / लचीलापन [Option ID = 140]
Correct Answer :‐
Softening point / गलनांक [Option ID = 139]
अ यिधक ठंडी जलवायु म, सबसे उपयु कंकीट है[Question ID = 36][Question Description = Q36_SAMS_ER‐CIVIL_MPNHM_2023]
1. Air‐entrained / पवेिशत हवा [Option ID = 141]
2. Ready mix concrete / तैयार िम स कंकीट [Option ID = 142]
3. Vacuum concrete / वै यूम कंकीट [Option ID = 143]
4. Heavy weight concrete / भारी वजन का कंकीट [Option ID = 144]
Correct Answer :‐
Air‐entrained / पवेिशत हवा [Option ID = 141]
37) Fineness of cement is tested by BIS _________
सीम ट क महीनता का परी ण बीआईएस _________ ारा िकया जाता है[Question ID = 37][Question Description = Q37_SAMS_ER‐
CIVIL_MPNHM_2023]
1. Sieve no. 10 / छलनी नं 10 [Option ID = 145]
2. Sieve no. 9 / छलनी नं 9 [Option ID = 146]
3. Sieve no. 19 / छलनी नं 19 [Option ID = 147]
4. Sieve no. 90 / छलनी नं 90 [Option ID = 148]
Correct Answer :‐
Sieve no. 9 / छलनी नं 9 [Option ID = 146]
Correct Answer :‐
All of these / ये सभी [Option ID = 152]
आईएस 456:2000 के अनुसार कंकीट क प या थता का मापांक, Ec िन न ारा िदया गया है:
[Option ID = 153]
2.
[Option ID = 154]
3.
[Option ID = 155]
4.
[Option ID = 156]
Correct Answer :‐
[Option ID = 153]
40) As per IS 456:2000, minimum period before striking formwork for vertical surface of the columns:
आईएस 456:2000 के अनुसार, तंभ क ऊ वाधर सतह के िलए फॉमवक टाइक करने से पहले क यूनतम अविध है:[Question ID = 40][Question
Description = Q40_SAMS_ER‐CIVIL_MPNHM_2023]
1. 7 days / 7 िदन [Option ID = 157]
2. 1 day / 1 िदन [Option ID = 158]
3. 14 days / 14 िदन [Option ID = 159]
4. 28 days / 28 िदन [Option ID = 160]
Correct Answer :‐
1 day / 1 िदन [Option ID = 158]
42) If σcbc is permissible compressive stress in flexural compression in N/mm2 in service, the modular ratio is:
यिद सिवस म N/mm2 म वंक संपीड़न म σcbc अनुमेय संपीडन पितबल है, तो मॉ यूलर अनुपात है:
[Option ID = 165]
2.
[Option ID = 166]
3.
[Option ID = 167]
4.
[Option ID = 168]
Correct Answer :‐
[Option ID = 168]
िन न को पितरोध करने के िलए लै ट लैब म डॉ स पदान िकए जाते ह[Question ID = 43][Question Description = Q43_SAMS_ER‐
CIVIL_MPNHM_2023]
1. Bending moment / बिडंग मोमट [Option ID = 169]
2. Thrust / जोर [Option ID = 170]
3. Shear / कतरनी [Option ID = 171]
4. Torsion / टोशन [Option ID = 172]
Correct Answer :‐
Shear / कतरनी [Option ID = 171]
44) The diameter of longitudinal bars in a column should not be less than
Correct Answer :‐
12 mm / 12 mm [Option ID = 176]
सरंधता 'एन' और शू य अनुपात 'ई' के बीच संबंध है[Question ID = 45][Question Description = Q45_SAMS_ER‐CIVIL_MPNHM_2023]
1. n=e/(1+e) / n=e/(1+e) [Option ID = 177]
2. n=e/(1‐e) / n=e/(1‐e) [Option ID = 178]
3. e=n/(1+n) / e=n/(1+n) [Option ID = 179]
4. n=(1+e)/e / n=(1+e)/e [Option ID = 180]
Correct Answer :‐
n=e/(1+e) / n=e/(1+e) [Option ID = 177]
46) Relation between void ratio(e), degree of saturation(S), Specific gravity (G) and water content (w) is?
रि अनुपात (ई), संतृि क माता (एस), िविश गु व (जी) और जल सामगी (ड यू) के बीच संबंध है?[Question ID = 46][Question Description =
Q46_SAMS_ER‐CIVIL_MPNHM_2023]
1. e×S=G×w / e×S=G×w [Option ID = 181]
2. e×w=G×S / e×w=G×S [Option ID = 182]
3. e=G×w+S / e=G×w+S [Option ID = 183]
4. e+S=Gw / e+S=Gw [Option ID = 184]
Correct Answer :‐
e×S=G×w / e×S=G×w [Option ID = 181]
47) The ratio of horizontal stress to the vertical stress is called coefficient of
ैितज पितबल से उ वाधर पितबल के अनुपात को िन न का गुणांक कहते ह[Question ID = 47][Question Description = Q47_SAMS_ER‐
CIVIL_MPNHM_2023]
1. Active earth pressure / सिकय पृ वी दबाव [Option ID = 185]
2. Passive earth pressure / िनि कय पृ वी दबाव [Option ID = 186]
3. Earth pressure / पृ वी का दबाव [Option ID = 187]
4. Plastic earth pressure / लाि टक पृ वी दबाव [Option ID = 188]
Correct Answer :‐
Earth pressure / पृ वी का दबाव [Option ID = 187]
48) The formula which is most appropriate to the design of pressure pipes is:
दबाव पाइप के िडजाइन के िलए सबसे उपयु सूत है:[Question ID = 48][Question Description = Q48_SAMS_ER‐CIVIL_MPNHM_2023]
1. Darcy Weisbach Formula / डास वीज़बैक सूत [Option ID = 189]
2. Mannings Formula / मैिनं स सूत [Option ID = 190]
3. Chezy’s formula / चेज़ी सूत [Option ID = 191]
4. Dupuit’s Formula / डुिपट सूत [Option ID = 192]
Correct Answer :‐
Darcy Weisbach Formula / डास वीज़बैक सूत [Option ID = 189]
Correct Answer :‐
Maximum daily + Fire demand / अिधकतम दैिनक + आग क मांग [Option ID = 195]
50) The devices which are installed for drawing water from different water sources are called
वे उपकरण जो िविभ न जल सोत से जल िनकालने के िलए लगाए जाते ह, उ ह कहा जाता ह[Question ID = 50][Question Description =
Q50_SAMS_ER‐CIVIL_MPNHM_2023]
1. Filters / िफ टर [Option ID = 197]
2. Intakes / अंतगहण [Option ID = 198]
3. Spillway / ि पलवे [Option ID = 199]
4. Inlets / इनले स [Option ID = 200]
Correct Answer :‐
Intakes / अंतगहण [Option ID = 198]
Correct Answer :‐
Reflux valve / र ल स वा व [Option ID = 202]
Correct Answer :‐
Tintometer / िटनटामीटर [Option ID = 207]
अंडे के आकार के नाले का िनचला भाग को कहा जाता है[Question ID = 53][Question Description = Q53_SAMS_ER‐CIVIL_MPNHM_2023]
1. Invert / अंतवत [Option ID = 209]
2. Arch / आच [Option ID = 210]
3. Metro / मेटो [Option ID = 211]
4. None of these / इनमे से कोई भी नह [Option ID = 212]
Correct Answer :‐
Invert / अंतवत [Option ID = 209]
54) The pipe which is installed in house drainage to preserve the water seal of traps is
ट ैप के पानी के सील को संरि त करने के िलए घर क नाली म जो पाइप लगाया जाता है, वह है[Question ID = 54][Question Description =
Q54_SAMS_ER‐CIVIL_MPNHM_2023]
1. Vent pipe / िनकास पाइप [Option ID = 213]
2. Waste pipe / नाली [Option ID = 214]
3. Soil pipe / िम ी का पाइप [Option ID = 215]
4. Anti‐Siphonage pipe / एंटी‐साइफोनेज पाइप [Option ID = 216]
Correct Answer :‐
Anti‐Siphonage pipe / एंटी‐साइफोनेज पाइप [Option ID = 216]
55) All sorts of putrescible organic waste from kitchens, hotels and restaurants in the form of waste food article, vegetables
and fruit peelings is called as
रसोई, होटल और रे तरां से अपिश खा पदाथ, सि जय और फल के िछलके के प म िनकलने वाले सभी पकार के सड़े हए जैिवक कचरे को कहा जाता
है[Question ID = 55][Question Description = Q55_SAMS_ER‐CIVIL_MPNHM_2023]
1. Rubbish / करकट [Option ID = 217]
2. Ash / राख [Option ID = 218]
3. Garbage / कूड़ा [Option ID = 219]
4. Dust / धूल [Option ID = 220]
Correct Answer :‐
Garbage / कूड़ा [Option ID = 219]
यिद बिडंग मोमट का आकार एक परवलय है, तो इसका ता पय है िक यह इसके अधीन है[Question ID = 56][Question Description =
Q56_SAMS_ER‐CIVIL_MPNHM_2023]
1. Point loads / िबंदु भार [Option ID = 221]
2. Uniformly varying load / समान प से िभ न भार [Option ID = 222]
3. Uniformly distributed load / समान प से िवत रत भार [Option ID = 223]
4. Uniformly varying load with point load / िबंदु भार के साथ समान प से िभ न भार [Option ID = 224]
Correct Answer :‐
Uniformly distributed load / समान प से िवत रत भार [Option ID = 223]
57) The shear force and bending moment are zero at the free end of cantilever, if it carries a
कै टीलीवर के मु िसरे पर अप पण बल और बंकन आघूण शू य होता है, यिद इसम _____ होता है[Question ID = 57][Question Description =
Q57_SAMS_ER‐CIVIL_MPNHM_2023]
1. UDL throughout the span / पूरे पान म यूडीएल [Option ID = 225]
2. Point load at the free end / मु िसरे पर िबंदु भार [Option ID = 226]
3. UVL with maximum ordinate at free end / मु िसरे पर अिधकतम ऑिडनेट के साथ यूवीएल [Option ID = 227]
4. Couple at the free end / मु िसरे पर कपल [Option ID = 228]
Correct Answer :‐
UDL throughout the span / पूरे पान म यूडीएल [Option ID = 225]
58) The bending moment diagram of cantilever beam having point load at free end is
मु िसरे पर िबंदु भार वाले किटलीवर बीम का बंकन आघूण आलेखन है[Question ID = 58][Question Description = Q58_SAMS_ER‐
CIVIL_MPNHM_2023]
1. Linear / रैिखक [Option ID = 229]
2. Quadratic / ि घात [Option ID = 230]
3. Cubic / घन [Option ID = 231]
4. None of these / इनम से कोई नह [Option ID = 232]
Correct Answer :‐
Linear / रैिखक [Option ID = 229]
59) Maximum bending moment for a simply supported beam of span ‘L’ supported at both ends having uniformly
distributed load ‘w’ per unit run is
पित यूिनट रन समान प से िवत रत लोड 'w' वाले दोन िसर पर समिथत पैन 'L' के सरल समिथत बीम के िलए अिधकतम बंकन आघूण है
[Option ID = 233]
2. wL2/16 / wL2/16
[Option ID = 234]
3. wL3/8 / wL3/8
[Option ID = 235]
4. wL2/28 / wL2/28
[Option ID = 236]
Correct Answer :‐
wL2/8 / wL2/8
[Option ID = 233]
60) The moment of Inertia of a circle having radius ‘r’ passing through Centre of Gravity is:
[Option ID = 237]
2. π r4 /8 / π r4 /8
[Option ID = 238]
3. π r4 /16 / π r4 /16
[Option ID = 239]
4. π r4 /32 / π r4 /32
[Option ID = 240]
Correct Answer :‐
π r4 /4 / π r4 /4
[Option ID = 237]
61) The value of kinematic indeterminacy and statical indeterminacy of a fixed beam is respectively
एक िनि त बीम क गितज अिनि तता और थैितक अिनि तता का मान कमशः है[Question ID = 61][Question Description = Q61_SAMS_ER‐
CIVIL_MPNHM_2023]
1. 3,1 / 3,1 [Option ID = 241]
2. 0,3 / 0,3 [Option ID = 242]
3. 1,2 / 1,2 [Option ID = 243]
4. 2,0 / 2,0 [Option ID = 244]
Correct Answer :‐
0,3 / 0,3 [Option ID = 242]
ि थर प से िनधा रत संरचना के िलए अिनि तता क िडगी िन न के बराबर है[Question ID = 62][Question Description = Q62_SAMS_ER‐
CIVIL_MPNHM_2023]
1. One / एक [Option ID = 245]
2. More than 1 / 1 से अिधक [Option ID = 246]
3. zero / शू य [Option ID = 247]
4. Less than 1 / 1 से कम [Option ID = 248]
Correct Answer :‐
zero / शू य [Option ID = 247]
[Option ID = 249]
2. 0.85 bd/fy / 0.85 bd/fy
[Option ID = 250]
3. 0.1 percent of web area / वे ब त
े का 0.1
[Option ID = 251]
4. 0.5 percent of web area / पितशत वे ब त
े का 0.5 पितशत
[Option ID = 252]
Correct Answer :‐
0.04 bD / 0.04 bD
[Option ID = 249]
64) Which type of ccement is not used in mass concreting work like dams, large foundation etc?
यापक प से कंकीिटंग काय जैसे बांध, बड़ी न व आिद म िकस पकार के सीम ट का उपयोग नह िकया जाता है?[Question ID = 64][Question
Description = Q64_SAMS_ER‐CIVIL_MPNHM_2023]
1. Portland slag cement / पोटलड लैग सीमट [Option ID = 253]
2. Low heat cement / कम ऊ मा वाला सीमट [Option ID = 254]
3. Portland Puzzolana cement / पोटलड पु ज़ोलना सीमट [Option ID = 255]
4. Quick setting cement / ि वक सेिटंग सीमट [Option ID = 256]
Correct Answer :‐
Quick setting cement / ि वक सेिटंग सीमट [Option ID = 256]
Correct Answer :‐
Wood tar / तारकोल [Option ID = 257]
Correct Answer :‐
0.08 / 0.08 [Option ID = 264]
67) The units used for D.P.C work in MKS system is
एमकेएस पणाली म डीपीसी काय के िलए पयु इकाइयाँ ह[Question ID = 67][Question Description = Q67_SAMS_ER‐CIVIL_MPNHM_2023]
1. cubic centimeter / घन सटीमीटर [Option ID = 265]
2. cubic meter / घन मीटर [Option ID = 266]
3. squar centimeter / वग सटीमीटर [Option ID = 267]
4. squar meter / वग मीटर [Option ID = 268]
Correct Answer :‐
cubic meter / घन मीटर [Option ID = 266]
68) For a standard compaction test, the mass and drop of hammer are:
[Option ID = 269]
2. 4.89 kg and 310 mm / 4.89 िकगा और 310 िममी
[Option ID = 270]
3. 4.89 kg and 450 mm / 4.89 िकगा और 450 िममी
[Option ID = 271]
4. 2.60 kg and 310 mm / 2.60 िकगा और 310 िममी
[Option ID = 272]
Correct Answer :‐
2.60 kg and 310 mm / 2.60 िकगा और 310 िममी
[Option ID = 272]
कौन सी िविध का उपयोग भवन के आकलन के िलए नह िकया जाता है?[Question ID = 69][Question Description = Q69_SAMS_ER‐
CIVIL_MPNHM_2023]
1. Individual wall method / यि गत दीवार िविध [Option ID = 273]
2. Centre line method / म य रेखा िविध [Option ID = 274]
3. Mid point method / म य िबंदु िविध [Option ID = 275]
4. None of these / इनमे से कोई भी नह [Option ID = 276]
Correct Answer :‐
Mid point method / म य िबंदु िविध [Option ID = 275]
[Option ID = 277]
2. Cohesionless soil / संसि हीन िम ी
[Option ID = 278]
3. C‐Φ soil / C‐Φ िम ी
[Option ID = 279]
4. All types of soil / सभी पकार क िम ी
[Option ID = 280]
Correct Answer :‐
Cohesionless soil / संसि हीन िम ी
[Option ID = 278]
सीम ट मोटार के साथ 12 िममी ला ट रंग का अपवािदत प रणाम है[Question ID = 71][Question Description = Q71_SAMS_ER‐
CIVIL_MPNHM_2023]
1. 3 sq.m / 3 वग मीटर [Option ID = 281]
2. 8 sq.m / 8 वगमीटर [Option ID = 282]
3. 10 sq.m / 10 वगमीटर [Option ID = 283]
4. 12 sq.m / 12 वग मीटर [Option ID = 284]
Correct Answer :‐
8 sq.m / 8 वगमीटर [Option ID = 282]
म य खंड सूत म
[Option ID = 285]
2. The area of mid‐sections is calculated by using mean depth / औसत गहराई का उपयोग करके म य वग के त
े क गणना क जाती है
[Option ID = 286]
3. the volume of the earthwork is calculated by multiplying the mid‐section area by the distance between the two original sections / दो मूल खंड के बीच क
दूरी से म य खंड त
े को गुणा करके अथवक क माता क गणना क जाती है
[Option ID = 287]
4. All of these / ये सभी
[Option ID = 288]
Correct Answer :‐
All of these / ये सभी
[Option ID = 288]
Correct Answer :‐
the two end of a line is not intervisible / एक रेखा के दो छोर अ य नह ह [Option ID = 289]
Correct Answer :‐
Iteration / पुनरावृि [Option ID = 295]
75) The last reading taken before shifting of instrument to a new station or before the ending the levelling work is known
as
उपकरण को नए टेशन पर थानांत रत करने से पहले या लेविलंग काय समा होने से पहले ली गई अंितम रीिडंग को कहा जाता है[Question ID = 75]
[Question Description = Q75_SAMS_ER‐CIVIL_MPNHM_2023]
1. Backsight / प ावलोकन [Option ID = 297]
2. Intermedite sight / इंटरमीिडएट ि [Option ID = 298]
3. Fore sight / दूरदिशता [Option ID = 299]
4. Height of instrument / यंत क ऊँचाई [Option ID = 300]
Correct Answer :‐
Fore sight / दूरदिशता [Option ID = 299]
76) A total station is combined of the following two instruments
Correct Answer :‐
a digital theodolite combined with an EDM module / एक ईडीएम मॉ यूल के साथ संयु एक िडिजटल िथयोडोलाइट [Option ID = 304]
Correct Answer :‐
the difference in elevation between successive contour lines / किमक समो च रेखाओं के बीच ऊंचाई म अंतर [Option ID = 308]
िब दुओ क ऊंचाई िनधा रत करने के िलए एक ड पी तर को पाथिमकता दी जाती है[Question ID = 78][Question Description = Q78_SAMS_ER‐
CIVIL_MPNHM_2023]
1. lying on hills / पहािड़य पर ि थत [Option ID = 309]
2. lying on a line / एक रेखा पर पड़े रहना [Option ID = 310]
3. lying in a moderately flat terrain / म यम समतल भूभाग म ि थत [Option ID = 311]
4. on a contour gradient / एक समो च ढाल पर [Option ID = 312]
Correct Answer :‐
lying in a moderately flat terrain / म यम समतल भूभाग म ि थत [Option ID = 311]
कंकीट के लंप परी ण का उपयोग इसके िन न को मापने के िलए िकया जाता है[Question ID = 79][Question Description = Q79_SAMS_ER‐
CIVIL_MPNHM_2023]
1. Mobility / गितशीलता [Option ID = 313]
2. Compaction under gravitational force / गु वाकषण बल के तहत संघनन [Option ID = 314]
3. Homogeneity / सम पता [Option ID = 315]
4. Consistency / संगतता [Option ID = 316]
Correct Answer :‐
Consistency / संगतता [Option ID = 316]
[Option ID = 317]
2. Grading / गिे डंग
[Option ID = 318]
3. Compaction / संघनन
[Option ID = 319]
4. All of these / ये सभी
[Option ID = 320]
Correct Answer :‐
All of these / ये सभी
[Option ID = 320]
81) Water cement ration is generally expressed in volume of water required per
जल सीम ट अनुपात आम तौर पर पित आव यक पानी क माता म य िकया जाता है[Question ID = 81][Question Description = Q81_SAMS_ER‐
CIVIL_MPNHM_2023]
1. 15kg / 15 िकलो [Option ID = 321]
2. 25kg / 25 िकलो [Option ID = 322]
3. 50kg / 50 िकलो [Option ID = 323]
4. 100kg / 100 िकलो [Option ID = 324]
Correct Answer :‐
50kg / 50 िकलो [Option ID = 323]
यो रंग क आव यकता है
[Option ID = 325]
2. to remove the adverse effect of heat of hydration / जलयोजन क ऊ मा के पितकूल पभाव को दूर करने के िलए
[Option ID = 326]
3. is very important for gaining early strength / पारंिभक साम य हािसल करने के िलए बहत ज री है
[Option ID = 327]
4. All of these / ये सभी
[Option ID = 328]
Correct Answer :‐
All of these / ये सभी
[Option ID = 328]
यिद कंकीट तैयार करने के िलए समुद के पानी का उपयोग िकया जाता है
[Option ID = 329]
2. it may corrode the reinforcement / यह सु ढीकरण को त‐िव त कर सकता है
[Option ID = 330]
3. it will reduce the ultimate strength / यह परम शि को कम कर देगा
[Option ID = 331]
4. All of these / ये सभी
[Option ID = 332]
Correct Answer :‐
All of these / ये सभी
[Option ID = 332]
84) The concrete may attain its 100 percent compressive strength after
___ के बाद कंकीट अपनी 100 पितशत संपीडन साम य हािसल कर सकती है[Question ID = 84][Question Description = Q84_SAMS_ER‐
CIVIL_MPNHM_2023]
1. One year / एक वष [Option ID = 333]
2. Three years / तीन वष [Option ID = 334]
3. Five years / पांच वष [Option ID = 335]
4. Ten years / दस वष [Option ID = 336]
Correct Answer :‐
Three years / तीन वष [Option ID = 334]
85) For intial estimate for a beam design, the width is assumeed
बीम िडजाइन के पारंिभक अनुमान के िलए, चौड़ाई मानी जाती है[Question ID = 85][Question Description = Q85_SAMS_ER‐
CIVIL_MPNHM_2023]
1. 1/15th of span / पान का 1/15वां भाग [Option ID = 337]
2. 1/25th of span / पान का 1/25वां भाग [Option ID = 338]
3. 1/30th of span / पान का 1/30वां भाग [Option ID = 339]
4. 1/45th of span / पान का 1/45वां भाग [Option ID = 340]
Correct Answer :‐
1/30th of span / पान का 1/30वां भाग [Option ID = 339]
86) A T‐beam behaves as rectangular beam of a width equal to its flange if its netutral axis
एक टी‐बीम अपने लज के बराबर चौड़ाई के आयताकार बीम के प म यवहार करती है यिद इसका तट थ अ [Question ID = 86][Question Description
= Q86_SAMS_ER‐CIVIL_MPNHM_2023]
1. Remains within flange / लज के भीतर रहता है [Option ID = 341]
2. Remain in the web / वे ब म बने रहना [Option ID = 342]
3. Coincides the center of gravity of beam / बीम के गु वाकषण के कद के समान है [Option ID = 343]
4. at junction of flange and web / लज और वे ब के जं शन पर [Option ID = 344]
Correct Answer :‐
Remains within flange / लज के भीतर रहता है [Option ID = 341]
87) The percentage of minimum reinforcement of the gross sectional area in slabs, is
लैब म सकल अनुभागीय ेत के यूनतम सु ढीकरण का पितशत है[Question ID = 87][Question Description = Q87_SAMS_ER‐
CIVIL_MPNHM_2023]
1. 0.08% / 0.08% [Option ID = 345]
2. 0.15% / 0.15% [Option ID = 346]
3. 0.20% / 0.20% [Option ID = 347]
4. 0.25% / 0.25% [Option ID = 348]
Correct Answer :‐
0.15% / 0.15% [Option ID = 346]
88) The design of retaining wall assumes that the retained earth
[Option ID = 349]
2. is free from moisture / नमी से मु है
[Option ID = 350]
3. is not cohesive / संस नह है
[Option ID = 351]
4. All of these / ये सभी
[Option ID = 352]
Correct Answer :‐
All of these / ये सभी
[Option ID = 352]
89) The property of soil which allows it to be deformed rapidly without rupture ,elastic rebound and also volume change ,
is known as
मृदा का वह गुण जो इसे िबना फटे, लोचदार पलटाव और आयतन प रवतन के िबना तेजी से िवकृत होने क अनुमित देता है, िन न के प म जाना जाता
है[Question ID = 89][Question Description = Q89_SAMS_ER‐CIVIL_MPNHM_2023]
1. Porosity / सरंधता [Option ID = 353]
2. Plasticity / लाि टिसटी [Option ID = 354]
3. Permeability / भे ता [Option ID = 355]
4. Compressibilty / संपी यता [Option ID = 356]
Correct Answer :‐
Plasticity / लाि टिसटी [Option ID = 354]
90) The rise of the water table below the foundation influences the bearing capacity of soil mainly by reducing
न व के नीचे जल तािलका का बढ़ना मु य प से िन न को कम करके िम ी क वहन मता को पभािवत करता है[Question ID = 90][Question
Description = Q90_SAMS_ER‐CIVIL_MPNHM_2023]
1. Cohesive and effective unit weight of the soil / िम ी का संस और पभावी इकाई भार [Option ID = 357]
2. Cohesive and effective angle of shearing resistance / अप पण पितरोध का संस और पभावी कोण [Option ID = 358]
3. Effective unit weight of the soil and effective angle of shearing resistance / मृदा का पभावी इकाई वजन और अप पण पितरोध का पभावी कोण [Option ID = 359]
4. Effective angle of shear resistance only / केवल अप पण पितरोध का पभावी कोण [Option ID = 360]
Correct Answer :‐
Cohesive and effective unit weight of the soil / िम ी का संस और पभावी इकाई भार [Option ID = 357]
Correct Answer :‐
Alum / िफटिकरी [Option ID = 364]
92) The prescribed hardness limit for the potable water ranges between
पीने यो य पानी के िलए िनधा रत कठोरता सीमा िन न के बीच होती है[Question ID = 92][Question Description = Q92_SAMS_ER‐
CIVIL_MPNHM_2023]
1. 50 to 100 ppm / 50 से 100 पीपीएम [Option ID = 365]
2. 75 to 115 ppm / 75 से 115 पीपीएम [Option ID = 366]
3. 120 to 200 ppm / 120 से 200 पीपीएम [Option ID = 367]
4. 150 to 250 ppm / 150 से 250 पीपीएम [Option ID = 368]
Correct Answer :‐
75 to 115 ppm / 75 से 115 पीपीएम [Option ID = 366]
93) While designing a water supply for an industrial township and commercial water demand of total supply is
एक औ ोिगक टाउनिशप के िलए पानी क आपूित क योजना बनाते समय और वािणि यक पानी के िलए, कुल आपूित क मांग है
[Option ID = 369]
2. 10 to 20% / 10 से 20%
[Option ID = 370]
3. 20 to 25% / 20 से 25%
[Option ID = 371]
4. 25 to 35% / 25 से 35%
[Option ID = 372]
Correct Answer :‐
20 to 25% / 20 से 25%
[Option ID = 371]
[Option ID = 373]
2. colourless / बेरंग
[Option ID = 374]
3. Free from pathogenic organisms / रोगजनक जीव से मु
[Option ID = 375]
4. All of these / ये सभी
[Option ID = 376]
Correct Answer :‐
All of these / ये सभी
[Option ID = 376]
Correct Answer :‐
Sullage / मैला पानी [Option ID = 379]
[Option ID = 381]
2. Land filling / भूिम भराव
[Option ID = 382]
3. Vermi‐composting / वम ‐खाद
[Option ID = 383]
4. All of these / ये सभी
[Option ID = 384]
Correct Answer :‐
All of these / ये सभी
[Option ID = 384]
Correct Answer :‐
Sedimentation tanks / अवसादन ट क [Option ID = 386]
98) The shape of the bending moment diagram over the length of a beam , carrying uniformly increasing load, is always
समान प से बढ़ते भार को वहन करने वाले बीम क लंबाई पर बंकन आघूण आरेख का आकार हमेशा_____ होता है[Question ID = 98][Question
Description = Q98_SAMS_ER‐CIVIL_MPNHM_2023]
1. Linear / रैिखक [Option ID = 389]
2. Parabolic / परवलीय [Option ID = 390]
3. Cubical / घनीय [Option ID = 391]
4. Curvelinear / वकरेिखक [Option ID = 392]
Correct Answer :‐
Cubical / घनीय [Option ID = 391]
[Option ID = 393]
2. π D4/64 / π D4/64
[Option ID = 394]
3. πD3/64 / πD3/64
[Option ID = 395]
4. πD3/32 / πD3/32
[Option ID = 396]
Correct Answer :‐
π D4/64 / π D4/64
[Option ID = 394]
Correct Answer :‐
0 / 0 [Option ID = 397]