Professional Documents
Culture Documents
Inteliconfig: New Features List
Inteliconfig: New Features List
Configuration Tool
SW version 2.36.1
1 General information 2
2 Changes in the version 2.36.1 3
3 Changes in the version 2.36.0 4
4 Changes in the version 2.33.0 5
5 Changes in the version 2.31.1 6
6 Changes in the version 2.31.0 7
7 Changes in the version 2.28.1 8
8 Changes in the version 2.28.0 9
9 Changes in the version 2.27.0 10
10 Changes in the version 2.26.1 11
37 Related information 38
38 Notes 39
IMPORTANT: This type of paragraph highlights a procedure, adjustment etc., which can cause a
damage or improper function of the equipment if not performed correctly and may not be clear at
first sight.
WARNING: This type of paragraph highlights a procedure, adjustment etc., which can cause a
damage or improper function of the equipment if not performed correctly and may not be clear at
first sight.
Example: This type of paragraph contains information that is used to illustrate how a specific function
works.
3.3 Repairs
Missing text "Comm Fail" in alarm if the communication with an ECU was interrupted
4.3 Repairs
"Unknown" application mode was displayed in the cloning windows.
7.2 Repairs
Specific ECU functions cannot be selected
Fixed
8.2 Repairs
Changing the order of PLC block output names
Fixed
Some setpoints wrongly indicate the invalid values
Fixed
Wrongly set the visibility of setpoints groups
Fixed
Renaming of the screens in ScreenEditor
Fixed
Lost specific PLC inputs during the bulk/offline upgrade
Fixed
9.2 Repairs
Wrongly transferred user protections states during the configuration upgrade
Fixed
It was not possible to upload configuration to the controller in the foreign language after the change of PLC
logic
Fixed
Wrong configuration of Offset in J1939 user parameter
Fixed
Fixed incorrect beaviour when Logout All was issued in Site connection
Fixed
11.2 Repairs
Unexpected switching to the tab Screen Editor
Fixed
Error after import of the PLC program
Fixed
Wrongly refreshed list of functions in combo-box
Fixed
12.2 Repairs
After the binary output configuration is removed, its configuration remains in the PLC
Fixed
Incompatible functions are offered for analog outputs
Fixed
During creating new protection, the user setpoint can have incompatible resolution or dimension
Fixed
13.2 Repairs
Problem with closing site connection in exceptional situations
Fixed
15.2 Repairs
Cannot create user setpoint with specific characters in the name
Fixed
Error at the end of the cloning process
Fixed
16.2 Repairs
Export of defined sites was not working
Fixed
Wrong control window wiring diagram for BTB application
Fixed
Export of remote display firmware was not working
Fixed
18.2 Repairs
Export of firmware through export manager in offline mode was ended with the error message
Fixed
Automatically switching focus after operations in others tab in the configuration window
Fixed
Possibility to export incompatible package through export manager
Fixed
19.2 Repairs
Configuration of ECU fault codes was not transferred during the configuration upgrade
Fixed
Truncated texts in dialog windows
Fixed
The export manager exported pcg3 package with the incompatible content
Fixed
Consistency check warned the user even if only optional inputs on PLC blocks (Timer, Delay) were not
connected
Fixed
Updating the name and firmware version of the selected controller in the header of the application (site
connection)
Fixed
In the login manager window were not described headers of the table columns
Fixed
21.2 Repairs
Double click on the PLC block Force Prot caused closing of the whole application
Fixed
After removing language from the configuration it was not possible to add ECU module
Fixed
22.2 Repairs
Problems in site connection with wiring diagrams, opening windows (e.g. setpoints), context menus
Fixed
23.2 Repairs
Not possible to export site connection parameters
Fixed
Values for maintenance timers are not updated in the setpoints window if the value is changed from the
controller display
Fixed
24.2 Repairs
Invalid combination of access rules could be selected (e.g. level 1 user could have had higher permission
than level 2 user)
Fixed
If the active alternate configuration of setpoint was changed, the green indication on the number, which
displays currently active alternate configuration was not refreshed
Fixed
The unhandled situation if destination archive does not contain currently used language of controller
Fixed
25.2 Repairs
Invisible bargprahs for the InteliLite 9 in SplPhL1L2 and SplPhL1L3 connection type since version of the
firmware 1.3.0.2
Fixed
Two same dimensions in the translator causing problems
Fixed
26.2 Repairs
Shifted box with the statistics for InteliLite 9 controller
Fixed
Importing not valid Modbus definition cause problems
Fixed
Pressing Ctrl+Tab display non-information window
Fixed
27.2 Repairs
Wrong status of controller displayed after default configuration upgrade from InteliMains 210 to InteliMains
210 BTB.
Fixed
If 2 plug-in modules are installed in controller, only module in slot B can be upgraded
Fixed
Missing graphs for MRS - SplphL1L2, SplphL1L3
Fixed
Unable to open connection from InteliConfig when limits of bargraph on any analog inputs are the same (for
example 0 Bar... 0 Bar)
Fixed
Speed improvements
28.2 Repairs
Refreshing names of protections
Fixed
Opening Control tab instead of Home tab after start of InteliConfig
Fixed
Double loading of templates
Fixed
29.2 Repairs
Missing texts in history window
Fixed
30.2 Repairs
"Engine running only" protections were removed from MCB, MGCB and BTBapplications
Shutdown protections of modules were renamed in MCB, MGCB and BTBapplications to Mains protect
Changing size of SPtM wiring diagram
Fixed
Some minor bugs were fixed
33.2 Repairs
Configuration upgrade sometimes fail between versions
Fixed
Unable write FW and configuration via Airgate to 4G module
Fixed
Fixed some minor bugs
36.2 Repairs
When configuration in controller is not valid, in InteliConfig is very long timeout to recognize this situation.
Fixed
Minor bugs