rar
exe
\ EY
BUREAU OF INDIAN STANDARDS
Program of Work
Metallurgical Engineering Department
Designed, Developed and Maintained by NSD,
New Det
COMMITTEE WISE PROGRAM OF WORK OF Metallurgical Engineering DepartmentSto.
a0
B
a“
6
wv
a8
9
2
a
2
Committee
13
ro
mmo
ror
mrs
wr
rD10
roan
wrp13
wro1s
rps
wro16
ros
roa
wrp22
wro24
p25
wrp26
ro33
roa
Annexure
Annexure
Tite
‘Mechanica esting of Metals Sectional Committe Sectional Committee
Wrought steel Products Sectional Committee Sectional Commitee
Pigiron and Castron Sectional Committe Sectional Commitee
(res and Feed Stock or Aluminium Industry, its Metals Alloys and Products
‘Sectional Committe Sectional Committee
(res and Feed Stock or Copper Industry, ts Metals Alloys and Products
Sectional Committe Sectional Committee
(Ores and Feed Stock or Nonferrous (Excluding Aluminium and Copper)
Industry, their Metals Alloys and Products Sectional Committee Sectional
Commitee
Precious Metals Sectional Committe Sectional Commitee
Welding General an its Applications sectional Committee Sectional
committee
(res and Feed Stock or ton and Stel industry Sectional Commitee Sectional
Committee
Foundry and Stel Castings Sectional Committe Sectional Committee
Refractories Sectional Commitee Sectional Commitee
‘lay Steals and Forging Sectional Commitee Secional Committee
‘Stee Tubes, Pipes and Fitings Sectional Committee Sectional Commitee
"Non-Destructive Testing Sectional Committe Sectional ommittce
Metallography and Heat
Corresion Protection ad Finishes Sectional Committee Sectional Committee
Powder Metallurgical materials and Products Sectional Commitee Sectional
Commitee
restment Sectional Commitee Sectional Committee
Industral Fue Fired Furnaces Sectional Committe Sectional Commitee
Nanotechnologies Sectional Commitee Sectional Committee
Methods of Chemical Analysis of Metals Sectional Committee Sectional
Commitee
LUst of nian Standards Withdrawn/ Superseded
LUstof nian Product Standards‘otal:3710
Aspect Wise Report
Produc
ode of ratices
Methods of est:
Terminology
Dimensions:
system Standard
Safer Standaré
others
Service Speciation:
Process Speciation
Unclassified
ns
52
gocsctagscope
Standardisation inthe fea of mecnancal testing of metals
Liaison : 80 76.27 56-20): Genero technica delivery contons, sampling and mechanical testing methods
10.
Is
1.103 part
151501
vs2020
sossor.
22018
1s.s01 Part
2000
so 5507-2
sso
auzmo
Iso-ssor-2:
2018
51501 (Part
2200
sossors:
os
Tite
eal materials Sheet and strip 3mm thick les Reverse bend
Method for charpy impact test U- Notch for metals Fist Revision
etal materils-Brnel hardness est Part test method Fith
Revision
talc materials ~ Brine hardness test ~Part2 Verification and
‘aliration of testing machines
Metalic materils-Brineli hardness test Part’ calibration of
reference blocks Fith Revision
Vetalicmaterils- Brine hardness est Part table of hardness
values Fith Revision
etal Materials Vikers Hardness Test Prt Tet Method Fith
Revision
etal Matera Vickers Hardness Test Par Vertication and
Calibration of esting Machine ith Revision
talc Materials Vickers Hardness Test Part 2 Callration of
Reference Blocks Fith Revision
etal Material Vickers Hardness Test Part Tables of Hardness
ValuesFith Revision
Reaffirmation No.of
Details Amendments
February, 1
Februay, 1
220
Degree of
Equivalence
identical
under dual
numbering
Indigenous
Identical
under dual
numbering
‘denical
under dual
oumberng
\dentical,
under dual
umbering
Identical
under dual
numbering
demic
under dual
numbering
‘dentical,
under dual
numbering
Identical
under dual
umbering
Identical
under dual
numberingsi
2
ry
1s,
16,
13,
20.
a.
22
23.
Iso.
15.566 Part
02018
Iso-ssoet:
208
S586 et
22018
151586 (Pat
zo2).2018,
29232015,
sa76: 1985,
ss757 (eat
2000
Tie
eal materils- Rockwall mardnesstest Part text method Fith
Revision
tal materials Rockwell hardness test Part? verifeation and
Calfration of esting machines and indenters Fit Revision
VVETALLIC MATERIALS - ROCKWELL HARDNESS TEST PARTS.
CALIBRATION OF REFERENCE BLOCKS
Method for ized impact est of metal Fist Revision
ealicmaterils- Bend test Fourth Revision
talc materials Tensile testing-Part 1 Method of tes room
temperature
eral Materals-Tensile Testing Part 2 Method of Test at Elevated
Temperature Fourth Revision
Metalic materials- Tensile testing Part 3 method of test at ow
temperature
Method for reverse bend test for metallic wre Second Revision
eal materials Wire Simple torsion test Fourth Revision
ethos for verification of vckershardnes testing machines Third
Revision
etal Matrals-Wire-Wrapping est Second Revision
eal Materals Charpy Pendulum Impact Test Par 2 Test Method
Fourth Revision
Reafirmation No.of
Details Amendments
Februay,
2020
Maren, 2022
February, =~
2020
Degree of
Equivalence
‘dentical,
under dual
umbering
Identical
under dual
numbering
‘denical
under dual
umbering
Inigenous
Identical
under dual
umbering
Identical
under dual
numbering
Identical.
under dual
umbering
Not
Equivalent
Identical
under dual
numbering
Identical,
underdual
umbering
Identical
under dual
numbering
Identical
under dual
numbering,si
No,
2,
2s,
26.
2.
28
2
a.
22
2
2s
36.
ar
28
Iso.
Iss (Part
22000
15.28 Part
22018
|s01300
2208
1s2328:2018
sso.maa22013
13237822005,
soi 1098
\s2a20;2018
me
ssz407/eaat
2388
\ss40r (Part
21388
Reafirmation No.of
Tie Details Amendments
Metalic Materals- Charpy Pendulum Impact Tet Part2 Verification -
of Testing Machines Fourth Revision
etal Mate'als- Charpy Pendulum Impact Test Par 3 Preperation
and Characterization of Charpy V-notch Tes Pieces fr Init
Verification of Pendulum Impact Machines Fourth Revision
VVETALLIC MATERIALS CALIBRATION AND VERIFICATION OF STATIC
LUNIAMIAL TESTING MACHINES - PART 1 TENSION COMPRESSION.
TESTING MACHINES- CALIBRATION AND VERIFICATION OF THE
FORCE-MEASURING SYSTEM
Metalic materils-Vericationofstaticuniaialtestingmachines February, =~
Part tension creeptesting machines Verification ofthe applied 2020
force Fist Revision
Metalic materils-Tube-Flatoing test Third Revision -
etal materials -Tube In FllSection-Bend test Second Revision January, 7022
METALLIC MATERIALS TUBE-FLANGING TEST
etal Matorals-Tube- Drift expanding test Second Revision February,
202
Determination of young s modulus tangent modulus and chor Maren, 2022
‘modulus=Testmethod
‘Termastat metals -Determinantion of eit First Revision February,
2029
Method for aceleratc fe test of electrical resistance alloy for March, 2022
heating elements First Revision
Method for creep testing of stee at elevated temperatures Part) March, 2022
tensile creep testing First Revision
Method or creep testing of steel at elevated temperatures Part? ‘March, 2022
tensile creep stress rupture testing Fst Revision
Metalic materials- Determination oflinearthermalexpansion Fist February, =~
Revision 2020
Stel and Steel Products Location and Preparation of Samples and
“Test Pieces for Mechanical Testing Thtd Revision
Degree of
Equivalence
Identical.
under dual
numbering
Identical
under dual
numbering
‘identical,
underdual
numbering
Identical
under dual
umbering
sdentiea,
under dual
numbering
Indigenous
‘dentical
under dual
umbering
Indigenous
Indigenous
Indigenous
Indigenous
Indigenous
Incigenous
Identical
under dual
numberingsi
No,
2.
a
48.
48.
50.
5.
2.
53.
Iso.
ss 3603/Et
388
18.3803 (Pat
Ds8s
1ss075 1985,
156585 (Bat
052020
s0.45a5.
120
15.6885 Part
22000
soases-
se at
alamo
1s0.4545.
32017
156585 eat
2.2020
1s0.4545.
220
Tie
Method fo calibration of pendulum impact esting machines for
testing metals First Revision
Stel Conversion of elongation values Part. carbon and low alloy
stools Second Revision
Stel-Conversion of elongation values Part2 austenitic steels
Second Revision
Metalic materils-Calioraton of force provnginstruments use for
‘the verification of uniaxial testing machines Second Revision
etal materials Conversion of harness values Third Revision
etal Moterials- Mechanical Testing Vocabulary Second Revision
Method for beam unnotched impact test for rey castron First
Revision
Method of aval load fatigue testing of see
Method of rotating bar bending fatigue testing of metals Fist.
Revision
Method oftest for determining shear strength of metas First Revision
Method of hydrogen embritiement tes for copper Fist Revision
eal Materials Knoop Hordness Test Part 1 Test Method Second
Revision
eal Matera Knoop Hardness Test Part2 Verification and
Calbrtin of esting Machines Second Revsion
Metalic Materials Knoop Hardness Test Part 3 Calibration of
Reference Blocks Second Revision
etal Materials Knoop Hardness Test Par 4 Tables of Hardness
Values Second Revision
Reafirmation No.of
Details Amendments
Februay, 2
2020
February,
22
February,
aon
Februay,
2020
Mareh,2022, -
arch, 2022
March, 2022
Mareh,2022,
March, 2022
Degree of
Equivalence
Inaigenous
Identical
under dual
numbering
sdenical.
under dual
numbering
‘dentical,
underdual
umbering
Identical
under dual
numbering
Identical
under dual
numbering
Indigenous
Inigenous
Indigenous
Inigenous
Indigenous
demic
under dual
numbering
‘dentical,
under dual
numbering
Identical
under dual
umbering
Identical
under dual
numberingsi
No,
54
5.
56.
sr
58.
3.
.
6.
a.
@.
1.
Iso.
is772:1984
1310636 (Part
2138
1s 10636 a
1983
Tie
Method ofcynamic fore calibration of aialload fatigue testing
machines by means of tain gauge technique
Method for selerescope hardness testing of metal materials fist
Revision
Method for verification of sleroscope hardness testing machines
First Revision
Method for identification of test piace axes
Method for calibration of standardized test biock or verification of
scleroscope hardness testing equipments
Method for upsetting test on metalic materials
Metalic materials- Sheet and strip- Erichsen cupping test Third
Revision
Method for plane strain fracture toughness testing of metals
etha6 for determination of magnetic permeability of kon and steel
Drop weight teat test on ferte steele and line pipe
Methods for measurement of abrasive wear properties of metallic
‘materia Part test method for gouging abrasion resistance Jaw
Crusher Test
Method for measurement of abrasive wea properties of metalic
‘material Part? test method for high stress abrasion
Methods for messurement of abrasive wear properties of metalic
‘materia Part’ test methods for low stress abrasion
Method for evaluation of frition and wear properties of materials
against steel surface
Method for fling weight teston metalic materials
VETALLIC MATERIALS SHEET AND STRIP DETERMINATION OF PLASTIC
STRAIN RATIO
Metalic Materals-Tube-Ring- Expanding test FrstRevision
Reafirmation No.of
Details Amendments
Mareh,2022,
Ware, 2022
arch, 2022
February,
2020
Mare, 2022
Ware, 2022
ore, 2022
March, 2022
Wareh,2022,
Moreh, 2022
Waren, 2022
Wareh,2022,
Moreh, 2022
Ware, 2022
Degree of
Equivalence
Indigenous
Indigenous
Indlgenous
Incigenous
Indigenous
Indigenous
‘dentical,
under dual
umbering
Indigenous
Indlgenous
Ingenous
Indigenous
Indigenous
Indigenous
Indigenous
Indigenous
‘dentical,
under dual
umberingsi
No,
n.
n.
1.
1.
1%
16.
n.
7
2
Iso.
s2e72:2001,
ise
so
Tie
Method for reverse torsion test for metalic wire
Metalic Mateals-Tube- Ring tensile test Second Revision
Method for torsional tres ftigue esting
talc Materal- Calibration of Extensometer Systems Used in
Unsiana Testing Second Revision
Metalic fol -Tenson testing
Mechanical Testing OF Metals- Determination Of Polsson s Rates
Metalic materils-Charpy pendulum impact test-Preparation and
characterization of charpy V reference test peces for verification of
testmachines
Metalic materials- Sheet and strip- Determination of tensile stain
hardening exponent
etal materils- Fatigue esting Fatigue crack growth method.
eral materils-Ftique esting Strain - Controlled
‘thermomechanical fatigue esting method
etal materils-Torque- Controlled fatigue testing,
etalicmaterils- Instrumented indentation test for hardness and
‘materials parameters Part test method
Metalic materils-Instumented indentation estforhardness and
‘materials parameters Part2verifeation and calibration of testing
machines
Reafirmation No.of
Details Amendments
February,
2020
February,
2020
February,
2000
Ware, 2022
Mareh,2021
February,
22.
Degree of
Equivalence
Not
Equivalent
Identical
under dual
numbering
Indigenous
‘identical,
under dual
umbering
Indigenous
Indigenous
Inigenous
Identical
under dual
numbering
Identical
under dual
umoerng
Identical,
under dual
umbering
Identica
under dual
numbering
Identical.
under dual
numberingsi
a.
3.
92.
93.
es
Iso.
1s.um4a (part
azole
isouasri-a:
2s
ssuzise,part
22018
sums (aa
Isouzo7:
1s7349(Pan
):2019
Isossse-1:
2s
ssazisa,eart
aezls
ss27349,part
auzols
Reafirmation No.of
Tie Details Amendments
eal materils-Instumented indentation test for hardness and -
‘materials parameters Part 3 cllration of reference blocks
etal materials Instumented indentation test fr hardness and
‘materials parameters Part # test method for metalic and Non-
elie coatings
alc materils- Fatigue testing Variable amplitude fatigue
‘testing Par general principles test method and reporting
requirements
ral materils- Fatigue testing Variable amplitude fatigue .
testing Pare cyle counting andrelated data reduction methods
talc materils-Sheet and srip- Determination of forming -Limit
curves Part measurement ané application of forming -Limit
Aiagrams nthe press shop
Heal materials Sheet and strip Determination of forming Limit
curves Parc determination of forming Limit curvesin the
laboratory
Metalic materils-Fatique testing - Statistical planning and analysis
of data
etalicmateils-Leeb hardness test Part test method
Hetalicmaterils-Leeb hardness test Part 2 verification and
Callration ofthe testing devices
eal mateils-Leeb hardness test Part 3 clloration of reference
test blocks
etal mateile- Unified metnod of test for the determination of -
quasistatic facture toughness
Degree of
Equivalence
Identical,
under dual
numbering
Identical
under dual
numbering
Identical
under dual
umbering
‘identical,
under dual
numbering
‘dentica
under dual
umbering
‘demic
under dual
numbering
Identical
under dual
numbering
‘dentical,
under dual
umbering
Identical
under dual
numbering
sdenical
under dual
numbering
Identical,
under dual
umberingsi
No,
9
9%.
or
98.
8.
100,
an
1,
10
28.
206
Iso.
(7623/20
vs2000
1so.2e202.
aaa
1s7813,Part
pod
180.
66302017
isarass
20
Iso
sa22e2015,
isa76:
2a
1s0.14586:
208
ssa7e27.Bant
vs2000
s04s65.
1202
srr (pan
2200
Iso4a6s:
isa7ais:
2020
isons:
20
isuzas:
20
10
arso2018
sa7679:
ma
180,
2ses32018
isariss
2022
Isozoa208
sa725:
me
1so20032:
me
Reafirmation No.of
Tie Details Amendments
Metalic Materals-Tensle Testing at high Strain Rates Part Elastic- -
Barctype Systems
Metalic Matrals-Tensile Testing at High Stan Rates Part 2 Servo
Hydreulicand Other Systems
etal Materials Sheet and Strip Hole Expanding Test
etal Materale- Torsion lest at Ambient Temperature .
etal Materals-Charpy V-notch Pendulum Impact Test
Instrumente Test Method
etal Materals- Dynamic Force Calibration for Unianal Fatigue
“Testing Part Testing ystems
Metalic Materals- Dynamic Force Calibration for Unianal Fatigue
Testing Part2 Dynamic Clloration Device DCD Instrumentation
Metalic Mateals-Sheet and Strip- Biaxial Tensile Testing Method
Using Crucform Test Piece
etal Matrals-Ductilty Testing -High Speed Compression Test
for Porous and Cellular Metals
etal materials- Method of test forthe determination of
quasistatic facture toughness of welds
Metalic materils-Uniaval ree testing in tension -Method of test
Method for evaluation of tensile properties of metallic superpastic
materials
Degree of
Equivalence
‘identical,
underdual
numbering
Identical
under dual
numbering
Identical.
under dual
numbering
‘dentical,
underdual
umbering
Identical
under dual
umbering
sdenica
under dual
numbering
Identical
under dual
umbering
Identical.
under dual
umbering
Identical
under dual
numbering
‘deical
under single
numberingSi.No. Doe No
wra3 (04932)
2 ro 3,15245)
3 m103.15254)
4 wero 3.9897)
SL.No. oc No
Si.No.
1 70 3 (13510)
2 nro 3(aars6)
Standards Under Develpoment
Projects Approved
mmr
ETALLIC MATERIALS - ROTATING BAR BENDING FATIGUE TESTING
ETALLIC MATERIALS FATIGUE TESTING ANIAL STRAIN CONTROLLED METHOD
Metalic Materials-Caliration a xtensometer Systems Used in Uniaial Testing Second Revision Amendment.
Pretiminary Draft stan
ds
No Records Found
Drafts Standards in WC Stage
rte
No Records Found
Draft standards Completed We Stage
oe no mmr
Metalic mateals Tube ring hydraulic pressure test
etalc materials Fatigue testing ~ ial frce-controlied method
Revision of I 507411969
3 rp 318703) etal materials Determin:
on of frmingtimit curves for sheet ané strip Part 2
Revision of 16171462019 Determination of forming-timitcurvesin the laboratory
SL.No. oc No
Finalized Draft Indian Standard
rte
No Records Found
Finalized Draft Indian Standards under Print2 wr s(ursse) Metalic materials- Sheet and strip- Determination of tensile stain hardening exponent
Revision of I 15756:2007
2 MTD 3 (19509), Mechanical testing of metals Ductlty testing Compression test for porous and cellular
metas
Total Published Standards: 105 Total Standards Under development :9
Product
Code of Practices
Methods of Test
Terminology
Dimensions
system Standard
Safer Stanéaré
others
Service Speciation:
Process Specification
Unclassified
eccocenrgse
Total :206“Annexure/:ist fin
Standards Withdrawn/Superseded
MTD 3: Mechanical Testing of Metals Sectional Committee
Tite
4 1s223:2950 Tensile Testing OF Metals erous
2. Isaorsa9s8 Tensile testing of metals nor-ferous
3. 181500:2005 Method for Brinll Hardness Testor Metalic Materials
15 1500(Part 2013 / 180 6506-12005
4181801 :2002 Method For Vickes Hardness Test for Metallic Materials
5. Isasai:3972 Method for tensile testing of sce wire
6 181596:2000 Method for Rockwell Hardness Tes for Metalic Material Scales A-B.CD-E--G-H.K 15N30N
45N 15T20T and AST
1 181608:2005 Mechanicaltesting of metals- Tensile Testing
15 1608:2005 150 6592-1998,
ts 1662: 1972
Method for tensile testing of see sheet and stip of thickness 0 mm 03mm
15 1663 (Part 2}: 1862
Tensile testing of tel sheet and strip Part2 Stel sheet and strip of thickness above 3mm
10, 1S1692:2074 Method for simple bend testing of steel sheet and strip less than 3mm thick
2182754 Party): 1986 Method for Verification of Vickers Hardness Testing Machines Part HV02t0 HV 100
12, 1S1754(Part2):1986 Method fo Verification of Vickers Hardness Testing Machines Part? Less than HVO2
13, 1s1736:1974 Methods of modified Erichsen cupping test for ste! sheet and stip
14, 191789:2961 Method for rinellnardnesststfor grey castiron
15, 18179021981 Method for brinell hardness test fo light metals and tei aloys
16, 1818101962 Method for vickers hardness test flight metals and tei aloys
a Isu8i6:2979 Method fo tensile test for ight metals an their alloys
18, Is1894:1972 itera for earthquake resistant design of structures Fourth Revision
1, 18207821979 Method for tensile testing of grey aston
20, 12281:2005, Method for Verification of Snel Hardness Testing Machines
15 2281:2005 so 6506-21999
2, 187348:1968 Method for det expanding teston copper and copper ally tubes
m2, 182684:1977 Method for tensile testing of copper and copper alloys
22, t52655:1968 Method fo tensile testing of copper and copper alloy tubes
28, 182656:1966 Method for tensile testing of copper and copper alloy wires‘Tite
2, Is667:1966 Method for tensile testing of aluminium and aluminium alley tube
26, 182658:1966 Method for tensile testing for aluminium and aluminium alloy wire
2, 1$2866;2968 Method for Vickershardness test for copper and copper alloys
28,15 3054:1965, Method for Brinll hardness test for copper and copper alloys
2, 1832601965 Method For Bend Test For Copper And Copper Alloys
30, 15388: 65, Method for wrapping test for copper and copper alloy wire
Bi 182408: 1965 Method fornor-interrupted creep testing of telat elevated temperature
32, 152409:1965, Method for creep stress rupture testing tel of elevated temperature
33. 153754: 1985 ethos fo calibration of standardized blocks tobe usd for Rockwell hardness testing
machines Sales AS-CO-EF-GHK
2A, 152804 2088 Method for alibration of Rockwell hardness testing machines Scales AB-CD-E-F.GHK
35, 154132; 2005, Method for calibration of standardized blocks tobe used for Brine hardness eng
machines
36134133; 2002 Method for Calibration of Standardized Blacks to be Used for Vickers Hardness Testing
15 4133:2002 150 6507-31997 achines
57. 184133(Parts) 1986 Method for Calibration of Standardized Blocks to be Used for Vickers Hardness Testing
Machines Part 1 HV02 to HV 100
38, 1S4168:1967 Method for wrapping test of aluminium and aluminium alloy wre
38, sare:a67 Method forsimpletorsion tes of aluminium and aluminium alloy wire
40. tsar: as6r Method for fattening test of aluminium and aluminium ally tubes
41, 154598:1968, Method fo simple bend test for aluminium and aluminium alloy sheet and strip of|
thickness between 02 mmand 7 mm
42154599: 1968, Method For Dit Expanding Test On Aluminium And Alumlum Allo Tubes
42, Isanasaes etnoc for determination of lower yield stress proof stress and proving testfor telat
elevated temperatures
44, tssort: 1969 Method for fattening test fr copper and copper ally tubes of circular section
45. 1550721988 Method for Rockwell Superficial Hardness Test seale1Sn30n an 25¢30t nd ASt
46, Is so72: 988 Method fo verification of Rockwell superficial hardness testing machines Scales 15N 30N
45N 1ST 20T ng 4ST
47.15 5076:1966 Method for calibration of standardized block to be used for rockwell superficial hardness
testing machines Scales 15N 30N 45N 1ST 30T and 4ST
48, 1ss619:1970, Recommendations fo fatigue testing of metals
48, tse2s2su972 Method for simple torsion testing of copper and copper alloy wie‘Tite
so. Ises20:1972 Method for the determination of K-values of aenile testing system
51 ts68T8:1973 Method of reverse bend testing of copper and copper alloy wire
52,15 6865:1973, Method for Knoop hardness testing of metals
5. IsT095:2973 Method fo verification of Knoop hardness testing machines
54 S087: 1973 othad for Calibration of Standardized Blacks for Verification of Knoop Hardness Testing
Machines
55, e2es:1976, Method for tensile test of copper and copper ally called at product thickness less than 5
56. Isanse:2979 Method for vickers micro-hardness testing of metals
57,5 10175(Parta} 1988, Mechanical testing of metals Modified echsen cupping tst- sheet and stip PLL
Thickness upto 2mm
58 1s20se8; 983 Tables of Brine hanes values for use in test made on flat surfaces
58,5 10827 Part): 1986 ‘Tables of Vickers Hardness Values for Use in Tests Made on Flat Surfaces -Part HVS to HY
100
60,15 10827 (Part 2}: 1986 ‘Tables of Vickers Hardness Values for Use in Tests Made on Flat Surfaces -Part2Hv02 to
Less Than vs
15 10927 (a3): 1991,
Tables of Vickers Hardness Values for sein Tess Made on Flat Surfaces -Part Less than
Hvo2