Description
Uta Bitumen Emulsion is @ dark
brown ligud blend of selected
Bitumen which are a emulsified
with water tries to form a black
flexible protective coating The
cured fimis tough and waterproof
‘which is resistant to the passage
of waterand vapors transmission.
Primary Application
Bond breaker for structural work.
Waterproofer for walls and floors
Curing membrane for concrete
Waterproofer for concrete and
masonry,
Protective coating for bolow
ground concrete,
FEATURES/ BENEFITS
+ Cold applied
+ Easy to apply
+ Economicalinuse
+ Solventiree
+ Chemical resistance
* Bondta the concrete, steal, wood,
+ Cork,
Properties
Bitumen Content: 60%
Time iw 2.coat: Min. 2hours
Application Temperature
(5C to 50°C)
Chemical Resistance
Water: Excellent
Seawater: Excelent
Akal Excellent
DiuleAcids: Excelent
Standards Compliance
ULTRA Bitumen Emulsion
complies with a concrete curing
Fequirement of ASTM C 309-93,
when applied ata rate of 2m per
lie.
Technical Support
Ustra Chemical offers a technical
support service fo end-users and
contactors, as well as on-site
technicalassistance.
Application instructions
Surface Preparation
All surfaces, which are to receive
the coating, must be sound and
{tee rom contamination such as
Oil, Lattance, grease, wax, dit or
any other form of foreign mater,
‘which couldatfectadhesion,
Application
Ulta Bitumen Emulsion may be
applied by brush, broom or
squeagee.
Itis recommenced that 1-3 coats
should be applied, depending on
the degree of protection required
Where the Ultra Bitumen Emulsion
isto take a screed, the second coat
should be blinded with clean, dry
sharp sand as soon as applied. The
‘excess sand should be brushed off
‘when coatinghas dried
PACKAGING
Ura Bitumen Emulsion
is packaged in bulk, 218 kg, 20 kg
18kg
Coverage
Utra Bitumen: 1.5 t0 3.5m°NL. tr
(epenaing onthe
subst)
Storage
Shai Ifo ist year unopened packs
stored beiow 25°C in a shaded
environment If stored. at nigh
temperature the shell Ife will be
reduced
Precautions
Health & Sat
Utra Bitumen’ Emulsion contains
bituminous material. It has a
possible risk of rraversible effect in
fontact with skin wear suitable
protective
clothing, gloves and eye/face
protection. In case of accidental
Skin contact remove. immediatly
‘with plenty of clean water and seek
medicaladvice,
Cleaning
Uta Bitumen Emulsion may be
removed from tools and equipment
‘with water when tis wet. On drying.
Utra Btumen Emulsion may be
removedwith Utra Solvent 103,
Fire
Ura Bitumen Emulsion isnot
flammable Utre Solvent 103
flammable.
WARRANTY: The Ultra Chemicals
ULC. Uta) solely and expressly
warrants that fs products shal be fee
rom defects in materials and
workmanship for 12 months rom the
‘date ofpurenase. Unless authorzedin
\witing by an offcer of Uta, no other
Foprasentatons or statements mado
by Ulta or ts. ropresontaives, In
wring or orally. shall alter this
warranty. ULTRA MAKES NO
WARRANTIES, IMPLIED OR
OTHERWISE, AS TO THE
MERCHANTABILITY OR_ FITNESS.
FOR ORDINARY OR PARTICULAR
PURPOSES. OF ITS PRODUCTS
‘AND EXCLUDES THE SAME. If any
Uta product fais to conform to is
warranty Uta wil replace the product
ato cost to Buyer Re
any roduc shall be the soe ana
Consequential damages. Any waranty
‘aim must be made wihin one (1) year
‘ram the date ofthe calmed broach
Uta does not auinarize anyone on fs
behalf oak any writen of oral
Stalomonts which mary. way ator
Utes installation information or
instuctions in ts product erature or
on ite packaging. labels. Any
instalaton of Uiva product whieh ais
to cenform to. such Installation
infomation or instructions shal vid
this waranty Procuel domensiratons,
ifany are done forilstrave purposes
‘any and do not constitute @ waranty
‘or warranty ‘eration of any kind
Buyor shall bo solly responsible for
determining the sulabity of Uta’
products for the Buyers intended
Purposes.
Storage:
Avoid to place direct to sun light
and always store in shady areas,
150 Certification:
Our production facility
at Pakistanis
180 9001:2008
180 14001:2004
by BUREAU VERITAS
and UKAS Management