Setting
Description
fn
Vu
x0
according to equations given in 4.1.7.8
Sentences 2 and 3.
background turbulence factor obtained from
Figure 4.1.7-8 as a function of w/t, in which
w is building effective width and H is the
mean roof height. Both w and H are in
meters.
size reduction factor obtained from Figure A~
4.1.7.8, (4)-B as a function of w/H and
reduced frequency, fp“. It can be also
HW
Va
calculated from the following equation:
xt 1
3) 7, Sill ||], 10a
a7 |
natural frequency of vibration for given
direction (in Hz). Itis either given by the user
or computed by the program
mean wind speed (m/s) at the top of the
structure
VCon
mre —
Ty
reference velocity pressure (kPa = kN/m2),
which is provided by the user
air density value used by the program =
1.2929 kg/m3
gust energy ratio at the natural frequency of
the structure obtained from Figure A-4.1,7.8.
(4)-C. It can be also calculated from the
following equation
473
(1438)*7
1,220 fa/Vin
critical damping ratio in the along-wind
direction
Exposure
Factor, Ce
Exposure Factor can be determined based on one of the following three options (in
calculations below, h is height above ground level, and it is defined in meters):