Professional Documents
Culture Documents
N530BS CC1310F128RSM(4XD) transceiver module designed for 169M, 315M, 433M, 868M and 915MHz band. Up to
+14 dBm output power and down to -110 dBm sensitivity at 50 kbps.
N530BS is a low-cost and small size FSK RF transceiver module for transmitting and receiving digital data via radio
frequency. All of the N530's electronics (don't including an antenna) reside on a single PCB, optional RF pin or IPEX
connecter, and all operational power is derived from a single supply voltage.
The transceiver module design consists of a CC1310F128RSM low-power, integrated sub 1G transceiver RF chip,all IO
pin of CC1310F128RSM(4XD) are brought out. The module available frequence is from 160 to 960Mhz,The hardware is
N530BS module based TI CC1310F128RSM wireless transceiver, the module leads out all pins of CC1310F128RSM(4XD)
chip. The module uses serial port or SPI to control. It can modify the wireless rate and channel through serial port or SPI.
The module use small size SMD package, the module is suitable for SMT production. Rapid development without
Module Parameter
Model N530BS
Module Interface SPI, UART
Frequency 430-464 Mhz, 860-928 Mhz
RF Data Rate 1.2-2000 kbps
Transmitting Power +14 dBm
Receiving Sensitivity -110 dBm
TX Current 24 mA
RX Current 6 mA
Frequency Deviation +/- 10 khz
Communication Distance 10 – 800 m(Visual distance)
Antenna Interface RF pin, IPEX
1
Installation Mode SMD
Volume (mm) 13 mm x 12 mm x 3 mm
Operating Voltage 2 - 3.6 V
Working Temperature and Humidity Environment Temperature: -30-70 ℃; Humidity 10-95 %RH
Storage Temperature and Humidity Environment Temperature: -40-80 ℃; Humidity 10-95 %RH
Weight (kg) ≈10g
Module Pinout
8 GND GND
16 GND GND
17 RF RF pin
Application Area
Wireless MBUS
Arduino
2
N530BS Layout(mm)
17
1 16
2 15
3 14
4 13
5 12
6 11
7 10
8 9
17
1 16
2 15
3 14
4 13
5 12
6 11
7 10
8 9
Ordering Information
N530BS-433M RF Module CC1310F128RSM +14dBm, 20mW – 410-464Mhz
N530BS-868M RF Module CC1310F128RSM +14dBm, 20mW – 860-960Mhz
www.coralradio.com