designed to be welded directly to the pipe or vessel. The fitting incorporates a radius to match the curvature of the pipe or vessel, with a maximum 1/16” weld gap.
It also incorporates a thick body to provide
adequate branch reinforcement area to help strengthen the weld joint. It is the most popular type of mounting configuration.
Learn about Cosasco SAFR Services to protect
and lengthen the life of your Access Fittings!
Specifications
Mounting — Flarweld w/Integral Branch
Reinforcement per ASME B31.3
Probe Retrieval Under Pressure With the
Cosasco, HRSL Tool (non telescopic) and Standard Cosasco 6000 PSI Service Valve
Retaining Pin, Moisture and Debris Protection
Caps Included
Standard Temperature Rating with
Viton/Teflon Seals: From -15° F (-26° C) Up To +400° F (+204°C)
Available Temperature Rating with Optional
Seals: From -70° F (-56° C) Up To +450° F (+232°C)
Pressure Rating — 6000 PSI/41.3 MPa Working
Meets NACE MR0175 and MR0103
Pressure Equipment Directive (PED) Certified
Documents
Model 50H Access Fitting
Assemblies DATASHEETS
Related Products
Secondary Process Containment Covers
11841 Smith Avenue / Santa Fe Springs, CA 90670 USA
Toll Free +1-800-635-6898 / Phone: +1-562-949-0123 / Fax: +1-562-949-3065 Worldwide: Los Angeles / Houston / Aberdeen / Dubai / Singapore / Kuala Lumpur / Beijing / Perth