Professional Documents
Culture Documents
SERVICE MANUAL
CAUTION
BEFORE SERVICING THE UNIT, READ THE “SAFETY PRECAUTIONS” IN THIS MANUAL
MODEL : LM-K520BMW
Any reproduction, duplication, distribution (including by way of email, facsimile or other electronic means),
publication, modification, copying or transmission of this Service Manual is STRICTLY PROHIBITED unless you
have obtained the prior written consent of the LG Electronics entity from which you received this Service Manual.
The material covered by this prohibition includes, without limitation, any text, graphics or logos in this Service
Manual
Copyright
Copyright ⓒⓒ2020
2020LGLG Electronics
Electronics. Inc.
Inc. All Allreserved.
right rights reserved. Date: Nov, 2020 / Issue 1.0
Only training
Training and service
and Service purposes Only
Purposes
Table Of Contents
1.1 Purpose
This manual provides the information necessary to repair, calibration, description and download the features of this model.
A. Security
This material is prohibited to share and release to unauthorized person, in accordance with the regulations, LG Electronics, Civil / criminal
responsibility in accordance with the relevant provisions violate.
C. Attention
Boards, which contain Electrostatic Sensitive Device (ESD), are indicated by the sign.
Following information is ESD handling:
• Service personal should ground themselves by using a wrist, strap when exchange system board.
• When repair are made to a system board, they should spread the floor with anti-static mat which is also grounded.
• Use a suitable, grounded soldering iron.
• Keep sensitive parts in these protective packages until these are used.
• When returning system board or parts like EEPROM to the Factory, use the protective package as described.
2.2 HW Features
2. Size 165.0*76.7*8.4mm
5. Chipset AP/MT6765
Main CAM: 48M CIS / Wide CAM 5M / Depth CAM 2M / Macro CAM 2M
8. Camera Front CAM: 28M
Specification
BAR 단위
LTE WCDMA GSM
(RSRP) (RSCP) (RSSI)
Specification
Item
LTE WCDMA GSM
1. Sleep Mode (Flight mode) Under 9mA Under 9mA Under 9mA
2. Sleep : connector Ear jack Under 11mA Under 11mA Under 11mA
3. Current(Sleep & Idle AVG) Under 11mA Under 11mA Under 11mA
TP1 (X1800)
Yes
Is it 26MHz?
NO
Circuit Diagram
TP1 (X1800)
The MT6177 operating voltages used two voltage sources 1.8V and 1.2V
Checking Flow Image
START
YES
TP2(1.2V)
C4038
The Problem may be
Check TP2
Logic part Refer to
+1.2V_RF is OK? YES Logic trouble shoot
NO
TP2(1.2V)
C4038
Copyright ⓒ 2020 LG Electronics. Inc. All right reserved.
Only training and service purposes
3.3 Checking DC-DC Block 3. TROUBLE SHOOTING
The PMIC(MT6371P/ABA-H, U1101) output voltages is used as the reference one of RF Device
YES TP1
C2101
Check TP2 Check U1600 Physical Damage
0.5V ≤ TP2 ≤ 4.4V ? or soldering condition
NO
YES
U2000
Check next step MT6371
U1600
MT6357
TP2
C1605
Circuit Diagram
TP1 TP2
C2101 C1605
Check NO
TP1, TP2 High Level? The Problem may be Logic part U4200
(3.0V≤TP1 ≤4.6V) Refer to Logic trouble shoot (ASM+GSM PA)
(1.7V≤TP2 ≤1.9V)
TP2(1.8V) R3112
YES
NOT
GOOD
Check
U4200 physical Damage Replace U4200
or soldering condition
OK?
TP1(3.5V)
C4238
TP2(1.8V)
C6201
Check
OTA performance
Check
RF Conductive
Check
RF path
Check
MT6177
GSM850/900 TX
C6209
U4200
(ASM+GSM PA)
GSM1800/1900 TX
C4239
GSM1800 RX
GSM850 RX
GSM1900 RX
GSM900 RX
NO
Change J4201, J4203.
Check RF Conductive
and retest RF conductive
NO
OK
M B J4201
Check Antenna path
Check RF signal path
L/H B J4203
Circuit Diagram
L/H B J4203
M B J4201
Check TP1
Change U4200 and TP2 U4000
retest RF conductive
NO C4287
ok
OK TP1
C4210
Change U4000
and retest
U4200
TP1
C4210 Circuit Diagram TP2
C4287
TP2
Change U4200
Check TP1
NO and retest RF conductive
OK
GSM900RX
OK
Check TP2 Change U4000 and retest
NO
U4200
Change DU4208
and retest
TP1
TP1
C4220
Circuit Diagram
TP2
C4292
Change U4200,
Check TP1
and retest RF conductive
NO
U4000
OK
OK TP1
Check TP2 Change U4000 and retest
L4210
NO
Change DUP4203,LNA4203,S4203
and retest
U4200
TP1
L4210
OK
TP1
OK
L4275
Check TP2 Change U4000 and retest
NO
Circuit Diagram
TP2
C4259
TP1
L4275
1.GSM850/GSM900 TX PATH
2.DCS1800/PCS1900 TX PATH
3.COMMON TX/RX PATH U4000
6177
U4200
GSM850/900-TX ASM+GSM+PA
GSM1800/1900-TX
GSM850/900 TX
Check
OTA performance
Check RF Conductive
Check ASM
Check MT6177
U4200
ASM
Circuit Diagram
TP3
J4201
TP1 TP3
C4122 TP2 J4201
L4223
TP2
OK
C4271
Change
DU4201/C4277/C4267/R4201/LNA4201/C4279
Check TP2 /L4229/S4201/C4269/R4217/C4270/C4271
NO
and retest
OK TP1
L4223
Change U4000
and retest
U4200
ASM
Circuit Diagram
TP1
L4223
TP2
C4271
TP1
C3119
Change
SW4300
NO
Check TP2 S4366/C4391/C4367/R4304/C4340/C4339
and retest TP2
OK C4339
U4000
6177
Transceiver
Circuit Diagram
TP2
C4339
TP1
L4348
TP2 TP3
L4275 J4201
Change PA4100 and Main bot
Check TP1
NO retest RF conductive
U4000
OK 6177
U4000
Change Transceiver
6177
Check TP2 DU4202/L4274/L4275/C6213 Transceiver
NO and retest
OK
PA4100
Change
NO U4200/C6240/C6202/L4204
Check TP3
/C4206/L4264/J4201
and retest RF conductive
OK
U4200
ASM
Circuit Diagram
TP2
L4275
TP1
C4126 TP3
J4201
Change DIP4300/SW4300/L4304/L4353/L4305
Check TP1 DIP4300
NO /L4341 and retest RF conductive
OK
SW4300
Change
NO
Check TP2 S4302/C4383/C4364/R4313/C4320/C4338
and retest
OK
TP1
L4341
Change U4000 and retest
U4000
TP2
6177 C4338
Transceiver
Circuit Diagram
TP2
TP1 C4338
L4341
Main bot
Change PA4100 and
Check TP1 TP1
NO retest RF conductive
C4124 U4000
OK 6177
Change Transceiver
Check TP2 U4266/L4225/L4224/L4115
NO and retest
OK
PA4100
Change
NO U4200/C6240/C6202/L4204
Check TP3 TP2
/C4206/L4264/J4201
and retest RF conductive L4225
OK
U4200
ASM
Circuit Diagram
TP2
L4225
TP1 TP3
C4124 J4201
Change L4224/U4266/C4263/C4261/C4262/C4222
Check TP2 and retest
NO
OK TP1
L4225
Change U4000
and retest
U4200
ASM
Circuit Diagram
TP1 TP2
L4225 C4222
Change DIP4300/SW4300/L4304/L4353/L4305
Check TP1 DIP4300
NO /L4348 and retest RF conductive
OK
Change
SW4300
NO
Check TP2 S4366/C4391/C4367/R4304/C4340/C4339
and retest
OK
U4000
6177
Transceiver
Circuit Diagram
TP2
C4339
TP1
L4348
U4200
ASM
Circuit Diagram
TP2
C4210 TP3
J4203
TP1 TP3
L4104 J4203
Change DIP4300/SW4300/C4300
Check TP1 /L4300/C4301/C4304/C4305/L4301 DIP4300
NO and retest RF conductive
OK
Change SW4300
NO C4321/L4322/FL4326/C4354/C4323/C4341
Check TP2
/C4342/C4324/C4322
and retest
OK
U4000
6177
Transceiver
TP2
Circuit Diagram C4322
TP1
C4321 TP2
C4322
Main bot
Change PA4100 and
Check TP1
NO retest RF conductive
U4000
OK 6177
Change Transceiver
DU4208/C4220/L4209/C6237/L4280
Check TP2
/R4299/C4131
NO
and retest
OK
PA4100
Change
NO C4221/U4200/C4229/L4236/C4250/
Check TP3
DUP4200/C4209/C4224/C4207/L4262
and retest RF conductive
OK
TP1
L4121
TP2 U4200
C4220
ASM
Circuit Diagram
TP2
TP3
C4220
J4203
TP1 TP3
L4121 J4203
Change DIP4300/SW4300/C4300
Check TP1 /L4300/C4301/C4304/C4305/L4301 DIP4300
NO and retest RF conductive
OK
Change SW4300
NO C4346/C4347/FL4308/C4335/R4345
Check TP2
/C4344/C4345
and retest
OK
U4000
6177
Transceiver
Circuit Diagram
TP1
C4346 TP2
C4345
U4200
ASM
Circuit Diagram
TP1 TP3
C4187 J4201
TP2
L4210
Change DIP4300/SW4300/L4304/L4353/L4305
Check TP1 DIP4300
NO /and retest RF conductive
OK
Change
SW4300
NO
Check TP2 U4303/C4373/L4318/C4374/L4302/C4375/C4376
and retest
OK
U4000
6177
Transceiver
Circuit Diagram
TP2
C4376
TP1
C4373
Main bot
Change PA4100 and
Check TP1
NO retest RF conductive
U4000
OK 6177
Change Transceiver
Check TP2 DU4207/C4211/L4208/C4172/R4125
NO and retest
OK
PA4100
Change
NO C4213/U4200/L4235/L4271/L4233/
Check TP3
DUP4200/C4209/C4224/C4207/L4262
and retest RF conductive
OK
U4200
ASM
Circuit Diagram
TP2 TP3
C4211 J4203
TP3
J4203
TP1
R4125
OK
TP2
Change DU4207 /C4230/L4265/LNA4207/FL4207/R4211/C4214 C4214
Check TP2 and retest
NO
OK
Change U4000
and retest
U4200
ASM
TP1
C4211
Change SW4302
Check TP1 DIP4300
NO and retest RF conductive
OK
NO ChangeC4315/FL4307/C4328/C4326/
Check TP2
R4346/LNA4307/L4356/C4396 and retest
OK
SW4302
U4000
6177
Transceiver
TP2
C4396
Circuit Diagram
TP1
R4340
TP2
C4396
Main bot
Change PA4100 and
Check TP1
NO retest RF conductive
U4000
OK 6177
Change Transceiver
L4221/R4214/C4232/DU4212/R4134/
Check TP2
C4137/L4100
NO
and retest
OK
PA4100
Change
NO C4219/U4200/C4229/L4236/C4250/
Check TP3
DUP4200/C4209/C4224/C4207/L4262
and retest RF conductive
OK
U4200
TP1 ASM
L4100
TP2
L4221
Circuit Diagram
TP3
J4203
TP2 TP3
L4221 J4203
TP1
L4100
Change U4200
Check TP1
NO and retest RF conductive
OK
Change DU4212/R4204/SW4217/C4284/C4247/C4252
Check TP2 and retest
NO
TP1
OK L4221
U4200
Change U4000
ASM
and retest
Circuit Diagram
TP1
L4221 TP2
C4252
Change DIP4300/SW4300/C4300
Check TP1 /L4300/C4301/C4304/C4305/L4301 DIP4300
NO and retest RF conductive
OK
Change
SW4300
NO
Check TP2 C4389/L4307/S4312/C4351/L4346
/C4350/C4352 and retest
OK
U4000
6177
Transceiver
Circuit Diagram
TP2
C4352
TP2
C4352
TP1
C4389
START
OK
Change
Check TP2 U4138/R4132/C4107/C4105
NO and retest
OK
Change
NO
Check TP3 U4200/L4235/L4271
and retest RF conductive
OK
TP1
NO Change
Check TP4 DUP4200/C4209/C4224/C4207 /L4262
and retest RF conductive TP3 TP4
OK
TP4
J4203
OK
Change L4106/C4105
Check TP2
/C4107 and retest RF conductive
NO PA4100
OK
U4200
Change PA4100/C4178/C4166/
Check TP3
and retest RF conductive ASM
NO
OK
Change LNA4141/C4193/L4128/
Check TP4 C4177/R4124/C4176 and TP3
NO retest RF conductive TP4
OK
Change U4000
and retest
TP1
R4132 TP2
C4103
TP3
L4120 TP4
C4175
NO Change FL4341/C4310/R4341/LNA4338/C4325/C4314
Check TP2
and retest
OK
TP2
TP1 TP2
R4330 C4314
Change
Check TP2
DU4228/L4214/C4246 and retest
NO
OK
PA4100
Change
NO U4200/C4229/L4236/C4250/DUP4200/
Check TP3
C4209/C4224/C4207/L4262 and U4200
retest RF conductive
OK ASM
TP1
L4101
TP2 TP3
J4203
Circuit Diagram C4246
TP1
L4101
TP2
C4246
TP3
J4203
TP2
OK C4236
OK
Change U4000
and retest
U4200
ASM
TP1
C4246
Circuit Diagram
TP1
C4246
TP2
C4236
Check TP2
NO Change SW4300
FL4328/C4386/L4312/C4333/C4357 and retest
OK TP2
C4357
U4000
6177
Transceiver
Circuit Diagram
TP2
TP1 C4357
C4330
Main bot
Change PA4100 and
Check TP1
NO retest RF conductive
OK
U4000
Change 6177
Check TP2 DU4213/L4213/C4241/C4242/S4213 Transceiver
NO /C4218/L4215 and retest
OK
PA4100
Change
NO U4200/C4229/L4236/C4250/DUP4200/
Check TP3
C4209/C4224/C4207/L4262 and
retest RF conductive
OK
U4200
ASM
TP2
L4215
Circuit Diagram
TP1 TP3
L4103 TP3 J4203
TP2 J4203
L4215
OK TP2
C4252
Change DU4213/C4243/R4205/SW4217/C4284/C4248
Check TP2 /C4247/C4251/C4252 and retest
NO
OK
TP1
Change U4000
and retest C4241
U4200
ASM
Circuit Diagram
TP1
C4241
TP2
C4252
Check TP1
Change PA4100 and U4000
NO retest RF conductive 6177
Transceiver
OK
Change
Check TP2 C4137/R4133/DU4220/L4279/C6225
NO and retest
OK
PA4100
Change
NO C6228/U4200/C4229/L4236/C4250/
Check TP3
DUP4200/C4209/C4224/C4207/L4262/
and retest RF conductive
OK
TP3
Circuit Diagram J4203
TP2
C6225
TP3
TP1 J4203
L4100
Change U4200/C6228
Check TP1
NO and retest RF conductive TP2
C6226
OK
Change DU4220/C6221/L4278/LNA4220/R4285/
Check TP2 S4220/R4282/C6226 and retest
NO
U4200
OK
ASM
Change U4000
and retest
TP1
C6225
Circuit Diagram
TP1
C6225
TP2
C6226
Change
SW4300
NO
Check TP2 C4380/L4355/S4320/C4399/L4354/
C4379/C4398 and retest
OK
U4000
6177
Transceiver
Circuit Diagram
TP2
TP1 C4398
C4380
U4000
Check TP1
Change PA4100 and 6177
NO retest RF conductive
Transceiver
OK
Change
Check TP2
U4140/C4182 and retest
NO
OK
PA4100
Change
NO U4200/L4235/L4271/L4233/DUP4200/
Check TP3
C4224/C4209/C4207/L4262
and retest RF conductive
OK
U4200
Check ANT MATCHING ASM
and retest
TP3
J4203
Circuit Diagram
TP1
C4179 TP2
C4182 TP3
J4203
OK
Change PA4100/C4178/L4120/
Check TP2 LNA4141/L4128/R4124/C4175 and retest
NO
OK
Change U4000
and retest U4200
TP1 ASM
C4179
Circuit Diagram
TP1
C4179
TP2
C4175
Change L4568/C4527/C4524/C4525/L4342/SW4302/C4387/C4382/
Check TP1
L4303 and retest RF conductive
NO DIP4300
OK
Change
SW4300
NO
Check TP2 FL4340/L4351/L4352/C4385/C4388
and retest
OK TP1
L4303
Change U4000 and retest
U4000
6177
Transceiver
TP2
C4388
TP1
L4303 Circuit Diagram TP2
C4388
BATTERY CONNECTOR(J2100)
PWR KEY(ANT3203)
The I/O connector and USB cable voltage(5.0V) is used as the reference one of PMIC for charging.
Checking Flow
START
NO
Connection OK? Change I/O connector or BTB
Image
Yes
Yes
Yes
Is it charging properly
After turning on?
NO
Yes Charging BTB (J3001)
Change the Charging IC
(U2000)
NO
Yes
Change the Main PCB
Charging BTB
(J3600)
END
I/O connector
(J3701)
Charging IC
(U2000)
The receiver control signal is generated by MT6357(U1600), the chipset and the receiver should be checked.
Checking Flow Image
Yes No
Yes
No
No
End
The speaker control signal is generated by MT6357(U1600), the chipset and the speaker should be checked.
Checking Flow Image
Start
Sub PCB_TOP
Contact pin
(ANT3600, ANT3601)
Check the Speaker.
And reconnect SPK module
Yes No
Yes
Circuit Diagram
No
Yes
No
End
Sub PCB_BOT
Start
Yes
Main Mic
Yes
No (U3600)
1. Change a Front
2. Change a Main MIC
Circuit Diagram
No
End
Sub Mic
(MIC1701)
Check the MIC filter
And reconnect PCB
Yes
No
1. Change a Front
2. Change a Sub MIC
Circuit Diagram
No
End
Disable detecting headset insert or No sound from Earphone, Check the Connector and Main PCB.
Checking Flow Image
Checking Flow
Sub PCB_Top
Start
Change Earjack
Connector
Circuit Diagram
No
End
No
Follow the power
Is the circuit powered?
troubleshooting
YES
NO
LCD Connector OK?
NO
NO
TP1~4 is OK?
TP3. LCM_RST
YES
(R2805)
Change the LCD module
NO
LCD Display OK? Change the main board
YES
END
J2800
J2800
TP3. LCM_RST
Circuit Diagram (R2805)
TP2. LCM_AVDD
TP1. EMI Filter
(C2801)
(Z2801~Z2805)
TP4. VIO18_PMU
(C2804)
71
Copyright ⓒ 2020 LG Electronics. Inc. All right reserved.
Only training and service purposes
3.10 Checking Touch Block 3. TROUBLE SHOOTING
YES
Touch operates well ?
No
No
Check
Power TP1,OK?
YES
TP3. EINT_CTP
TP1. LCM_AVDD (R2808)
YES
Touch Reset(TP2) (C2801) TP4. SCL
& Touch I2C (TP4,5) OK? BOT (D2813, pin1)
NO
TP5. SDA
(D2813, pin3)
Change LCD Module? NO Change
Does it works? the Main Board
YES
END
J2800
TP3. EINT_CTP
(R2808)
TP2. CTP_RST
(R2818)
TP4/5. SCL,SDA
(D2813, pin1,3)
73
Copyright ⓒ 2020 LG Electronics. Inc. All right reserved.
Only training and service purposes
3.11 Checking Compass sensor Block 3. TROUBLE SHOOTING
Yes
Calibration OK?
No U3301
Yes
Calibration OK?
No
Yes
Function is OK?
No
Function is OK?
Yes
U3301
END
Yes
Function is OK?
No U3302
Yes
Calibration OK?
No
Yes
Function is OK?
No
Circuit Diagram
Change the main board
Function is OK?
Yes U3302
END
No
Yes
LCD off?
No
Check power(R3302)
Yes
Output work well?
No
END
When 48M Main Camera doesn’t work, check J2900 and TP Voltage.
TP3: 1.15V
C2906
Camera Connector
(J2900) connected?
TP5 : MCLK
D2913
Yes
Camera is OK? J2900
TP2 : 1.8V
No
C2908
No
TP4 : 2.8V
TP1: 2.8V,TP2: 1.8V
TP3: 1.15V,TP4: 2.8V C2904
No
Camera is OK? Replace Main PCB
Yes
END
When 13M Front camera is not working, check J2902 and TP Voltage.
BOT J2902
Camera Connector TP1: 2.8V
(J2902) connected? C2913
Yes
Camera is OK? TP2: 1.8V
C2916
No
TP4:MCLK
No
D2915
TP1: 2.8V,TP2: 1.8V
TP3: 1.2V
Yes
Circuit Diagram
Yes
END
TP3: 1.2V
C2914
TP2: 1.8V
TP1: 2.8V C2916
C2913
Copyright ⓒ 2020 LG Electronics. Inc. All right reserved.
Only training and service purposes
3.16 Checking wide camera Block 3. TROUBLE SHOOTING
No
TP1: 2.8V,TP2: 1.8V TP2: 1.8V
TP3: 1.2V
TP4:MCLK C2957
C2961
Yes
Check No
MCLK TP4 is OK?
Circuit Diagram
TP1: 2.8V
Yes
C2958
Replace Camera Module
No
Camera is OK? Replace Main PCB
Yes
END
TP3: 1.2V
C2968
TP4:MCLK
C2961 TP2: 1.8V
C2957
TP2: 1.8V
Camera Connector
(J2904) connected?
C2919
Yes
Camera is OK?
No
TP3:MCLK
TP1: 2.8V C2932
No C2917
TP1: 2.8V,TP2: 1.8V
Yes
J2904
No
Check
MCLK TP3 is OK?
Circuit Diagram
Yes TP1: 2.8V
C2917
Replace Camera Module
No
Camera is OK? Replace Main PCB
Yes
END
TP2: 1.8V
C2919 TP3:MCLK
C2932
J2905
Camera Connector
(J2905) connected?
Yes
Camera is OK?
TP2: 1.8V
No C2926
No
TP1: 2.8V,TP2: 1.8V
TP3:MCLK
C2921
Yes
No TP1: 2.8V
Check
MCLK TP3 is OK? C2924
Yes
Yes
END
Lower PCB
Bottom
No
Motor Contact Check Motor Contact
is normal? (ANT3700, ANT3701)
Yes
No
Motor Driver IC Check R3708(VIBR_PMU)
power VPWR(C1719)? & Main PCB
Yes
Replace Motor
Circuit Diagram
R3708 (VIBR_PMU)
ANT4501 Image
Checking Flow : BT/WiFi Ant. Contact
BOT
U5101: WIFI Diplexer ANT4501
U5100: 2.4G Filter
START
ANT4501 NO
Check the connection between Clean the antenna
antenna and clip Connection parts
Yes
U5101,U5100
Check the WIFI Diplexer,
NO Check or replace the
WIFI Diplexer, Filter
TOP
Filter
Yes
NO
C5100 Check or replace
Check the Line +1V8_MTK_VCN18 U1600(PMIC) U5101
R5111 C5110
Yes
NO
C5110 Check or replace
Check the Line +3V3_MTK_VCN33 U1600(PMIC)
U5100
Yes
C5100
ANT4501
Ant C-Clip
ANT4501
: BT/WiFi Ant. Contact
U5101: WIFI Diplexer
U5100: 2.4G Filter
R5111
C5100
1.8V Voltage TP
C5110
3.3V Voltage TP
Image
ANT4504 : Ant clip
Checking Flow U5103 : Filter
U5106 : GPS LNA BOT
START
ANT4504 NO
Check the connection between Clean the antenna
antenna and clip Connection parts
ANT4504
Yes
R4503
ANT4504 NO
Check the RF Line Connection Check or replace
At R4503 the ANT1120
Yes
U5103 NO
Check the RF Line Connection Check or replace
at C5119 the U5103
TOP
Yes
Yes
NO
Check the Voltage
L5102 :2.8V Check
Check the components
at L5102 +2.8V around U5106
Yes
U5103
Circuit Diagram
ANT4504
R4503
U5103
U5106
C5119
START
Yes
Yes TOP
B5100
Check or Replace around
Check the RF Line connection the components
around U5102 No at U5102(MT6631)
and L5100
Yes
L5100
U5102
Circuit Diagram
R3700 J3700
B5100
L5100
BLOCK DIAGRAM
eMMC
MSDC0 RF IQ MT6177 RXD RxD FEM
eMMC
MSDC 4-bit LDOs BSI ctrl
SD MSDC1
LCD IF
LCD MIPI DSI
Camera IF MIPI CSI 26M_RF MT6357
Camera
I2C I2C_2 / I2C_4 26M_BB
26M_WBG
DCXO / TMS 26M
MT6765
I2C 32K_BB
CTP I2C_0
E-compass I2C I2C_1 08 X 09 X 2.7T Receiver
ALS/PS
I2C (SBS) LDOs
LDOs RTC
PN557 I2C_3
NFC : only EMW, YM, YMW VIB
Vibrator
Bucks
Fingerprint Bucks Headset
SPI
(HPL,HPR,AU_VIN1)
Audio I/F AUD I/F
A-sensor Audio Receiver
SIM1 PWRAP I/F SPI Speech
SIM1 : only YM, HM SIM1 SIM1 AU_VIN0
BC1.1
BC 1.1 AU_LO
SIM2 SIM2 SIM2 SPK PA
I2C_5
I2C MT6371
Keypad Keypad LCM_AVDD/AVEE
LCM Gate Driver
JTAG MSDC1
Debug SPI Pin-MUX LCM’s BL FLASH
port UART WLED BST Flash
JTAG
VSYS 4000mAh
USB2.0 VSYS Charger/ SW Li-ion
USB 2.0 OVP
USB Type-C
Copyright ⓒ 2020 LG Electronics. Inc. All right reserved.
Only training and service purposes
2. RF
4.BLOCK DIAGRAM
B1_TRX B1_TX
DPX
B3_TRX B3_TX
DPX LPF LB_TX
ANT#1
B4/B66_TX
B5/B8/B12/B13/B17/B28/B38/ B4/B66_TRX
DPX
B40/B39/B41//GSM_LB B2_TRX B2_TX MB_TX
DPX
B5_TRX B5_TX
LB/HB DPX HB_TX
M/S B8_TRX B8_TX
DPX LPF
B7_TRX B7_TX MMPA
DPX QM56020
B12_TRX B12_TX (PA4100)
LPF DPX SP2T
FEM QORVO
B20_TRX
QM57508 DPX
B20_TX
ANT#2 (U4200)`
B13_TRX B13_TX
B1/B2/B3/B4/B66//GSM_HB QORVO LPF DPX
PRX3(B20)
LNA SAW PRX1 (B8)
B39_RX
PRX6(B39)
SP2T PRX2(B12/13/17)
TX_FBRX PRX4 (B5)
PRX7 (B2)
PRX8(B4/B66)
LNA SAW PRX13 (B7)
B1/B4/B66_DRX
SAW DRX11 (B1/B4/B66)
M/S B40_DRX
LB SAW DRX10 (B40)
B3_DRX
SAW DRX8 (B3)
MB B39_DRX
SP12T SAW DRX6 (B39)
B2_DRX
(SW4300) SAW DRX7 (B2)
B5_DRX
SAW LNA DRX4 (B5)
B8_DRX
SAW DRX2 (B8)
ANT#4 B12/B17/B13_DRX
B7/B38 SAW DRX1 (B12/B13/B17)
B20_DRX
SAW DRX3 (B20)
B28_DRX
SAW DRX5 (B28)
M/S B38/B41_DRX
SAW LNA DRX9(B41/B38)
SPDT
SAW DRX13(B7)
TX_FBRX
Copyright ⓒ 2020 LG Electronics. Inc. All right reserved.
Only training and service purposes
3. AP / Memory 4.BLOCK DIAGRAM
SIM2_SRST SIM2_RST1
SIM2_SCLK SIM2_CLK1
SIM2
SIM2_SIO SIM2_I/O1
MT6631N/B WF_IN
WF_IN
WF_IN MT6762
WF_QP
WF_QP WF_QP
WF_QN
WF_QN WF_QN
BT_IP
BT_IP BT_IP
BT_IN
BT_IN BT_IN
BT_QP
BT_QP BT_QP
BT_QN
BT_QN BT_QN
GPS_I
GPS_I GPS_I
BT, WIFI 2.4/5G ANT GPS_Q
GPS_Q
GPS_Q
CONN_HRST_B
HRST_B GPIO121/ CONN_HRST_B
CONN_TOP_DATA
TOP_DATA CONN_TOP_CLK
GPIO114/ CONN_TOP_DATA
(32MHz~80MHz)
TOP_CLK GPIO113/ CONN_TOP_CLK
CONN_WB_PTA
WB_PTA GPIO120/ CONN_WB_PTA
Diplexer 2G BPF WB_RF_2G BT_DATA
BT_DATA BT_CLK
GPIO116/ CONN_BT_DATA
(MAX : 32MHz)
BT_CLK GPIO115/ CONN_BT_CLK
WB_CTRL0
5G BPF WF_RF_5G WB_CTRL0 GPIO117/ CONN_WF_CTRL0
GPS ANT WB_CTRL1
WB_CTRL1 GPIO118/ CONN_WF_CTRL1
WB_CTRL2
WB_CTRL2 GPIO119/ CONN_WF_CTRL2
BT_WIFI_GPIO_1 GPIO_150/PERIPHERAL_EN0
BT_WIFI_GPIO_2 GPIO_151/PERIPHERAL_EN1
BT_WIFI_GPIO_3 GPIO_152/PERIPHERAL_EN2
BT_WIFI_GPIO_4 GPIO_112/ ANT_SEL2
BT_WIFI_GPIO_5 GPIO_110/ ANT_SEL0
BT_WIFI_GPIO_6 GPIO_111/ ANT_SEL1
Filter GPS LNA GPS_RFIN XIN_WBG
WCN_XO_IN
(26MHz)
XO_IN WCN_XO
AVDD18_GPS VCN18(D16)
MT6357
AVDD18_WBT_1
AVDD18_WBT_2
AVDD28_FM VCN28(K13)
VCN33(P17) VSYS
FM_LANT_P Vin
FM_LANT_N AVDD33_WBT Vout 3.3V LDO
Headset NCP186AMX330TAG
Copyright ⓒ 2020 LG Electronics. Inc. All right reserved.
Only training and service purposes
4. Connectivity(NFC)
4.BLOCK DIAGRAM
NFC ANT
NFC_VEN
NFC_VEN VEN RXP ANT_NFC1
NFC_DWL_REQ
NFC_DWL_REQ DWL_REQ TX1
NFC_IRQ Matching
NFC_IRQ IRQ ANT_NFC2
TX2 circuit
RXN
SCL3
NFC_SCL3
SDA3
NFC_SDA3
VSYS
Power
SIM1_SWIO
SIM1
SIM1_SIO
AUD_DAT_MISO0 AUD_DAT_MISO0
AUD_DAT_MISO1 AUD_DAT_MISO1
Receiver
AUD_SYNC_MISO AUD_SYNC_MISO AU_HSP RCV_P
AU_HSN RCV_N
AUD_CLK_MOSI AUD_CLK_MOSI
AUD_DAT_MOSI0 AUD_DAT_MOSI0
AUD_DAT_MOSI1
MAIN_MIC
AUD_DAT_MOSI1
AU_MICBIAS0 MIC_BIAS_0
AUD_SYNC_MOSI AUD_SYNC_MOSI AU_VIN0_N MIC_IN0_N
AU_VIN0_P MIC_IN0_P
SUB_MIC
MIC_BIAS_0
AU_VIN2_N MIC_IN2_N
AU_VIN2_P MIC_IN2_P
Ear-jack
AU_REFN GND
AU_HPR R_AUDIO
AU_HPL L_AUDIO
HP_EINT S/W_DETECT
AU_VIN1_P MIC
(EAR_MIC_JCK_OUT)
MIPI LCD
MT6762 VSYS
6.6” HD+
EXT LDO (incell)
TP_LDO_2V8
TOUCH
GPIO_83 TOUCH_I2C_SCL0
GPIO_82
MCU
TOUCH_I2C_SDA0
GPIO_1 TOUCH_INT
GPIO_164 TOUCH_RESET
VSYS
(LCM_LED_PWM)
MT6371
Internal BL
Driver LCM_LED_K
LCM_LEDA
VSYS
GPIO_162 COMMON_I2C_SDA6 +6V_LCM_AVDD
GPIO_161 COMMON_I2C_SCL6
GPIO_14 LCD_BIASN_EN Bias Driver -6V_LCM_AVEE
GPIO_16 LCD_BIASP_EN
LCD_MIPI_DATA[0:3]_P
MIPI_DSI0_LN[0:3]_P
LCD_MIPI_DATA[0:3]_N
MIPI_DSI0_LN[0:3]_N
LCD_MIPI_CLK_P
MIPI_DSI0_CLK_P
LCD_MIPI_CLK_N
MIPI_DSI0_CLK_N
LCD_MAKER_ID0
GPIO_163
LCD_MAKER_ID1
GPIO_172
LCD_RESET_N
GPIO_45
PMIC AP
MT6371 (MT6765)
MIPI CSI Line(4)
RDP(N) / RCP(N)
VCAMA_CAM_LDO I2C_4
7Channel LDO 2.8V SCL4 / SDA4
FRONT CAMERA FCAM_CLK1
VCAMIO_PMU
VCAMIO 1.8V 13M CAM_CLK1/FCAM_CLK1
VCAMD_Front_CAM_LDO FCAM_RST1
7Channel LDO 1.8V CAM_RST1/FCAM_RST1
SPI4_MI
EINT4
VIO28_PMU
SPI4_CSB
EINT5 PMIC
Acceleration VIO18_PMU
SPI4_MO MT6357
EINT6 sensor
SPI4_CLK
EINT7
VIBR_PMU
MT6765
DC
Motor
SDA1
SCL1 E-compass
ALS / PS
EINT_ALS
EINT9
SDA6
SCL6
CAP_SENSOR_INT SAR Sensor
GPIO_15
MIPI
VIO18(1.8V)
VCAMIO/VCAMA/VCAMD VCAMD(1.2V)
Camera ALDO
MT6691ZXP/A
EMI_VDDQ(0.6V) LPDDR
4x VFE28(2.8V) RFFE
NCP114AMX1 EMI_VDD1(1.8V)
80TBG
XTAL_26M_IN
DSV
LCM_AVDD LCM_AVEE
MT6371
MT6765
LCM_LEDA
BL_VOUT DISPLAY
BL_LED1 LCM_LEDK_1
VSYS CHG_VLX BL_LED2
LCM_LEDK_2
LCM_LEDK_3
BL_LED3
FLASH_LED1
FL_LEDCS1 FLASH(CAM)
VBUS_USB_IN_PM
VBAT
VBAT CHG_VIN OVP USB
BATTERY
CIRCUIT DIAGRAM
U2000_MT6357_IC,PMIC (Top)
J2903- Wide
Camera Conn
No Front Camera
ANT3202,ANT3203 –
No Power key Work
ANT2700, ANT2701 –
RCV Contact
No RCV Sound
J2902 – Front
J2905 – Macro Camera Conn
Camera Conn No Front Camera
No Macro Camera
J2904 – Depth
Camera Conn
No Wide Camera U4000 – MT6177
No RF Work
U1600 – PMIC_MT6357
No Power On
J2801 – F/P Sensor Conn J2800 – LCD Conn J2100 – Battery Conn
No Finger Print Work J3001 – Sub PCB Conn
No LCD / Touch No Sub PCB Work No Power On
(SPK/Earjack/Charging/etc)
Copyright ⓒ 2020 LG Electronics. Inc. All right reserved.
Only training and service purposes
K520BMW SUB Board – TOP 7. PCB LAYOUT
Prime
PCB Revision
P/N: Samsung_EAN66030701_KMDH6001DA-B422
Memory RAM Size: 4GB
ROM Size: 64GB
1. Auto Detecting Item Test 2. Key Press Test 3. Display Check Test (1) 4. Display Check Test (2)
5. Ring Test 6. Vibrator Test 7. Motion Sensor Test 8. Loop Back Test (1)
13. Camera(Main Wide) Test 14. PDAF Test 15. Camcorder Test 16. Camera(VT) Test
17. FM Radio Test 18. OTG Test 19. FingerPrint Test 20. Camera(Macro) Test
21.Camera(Aux) Test
Tool
DLL name USB Driver
Version
H/W
※ If you want more information, please refer LGST ServiceCenter Tool’s Notification“Download User Guide”.
Wire USB cable,GPIB cable,RF cable RF line loss is less than 1DB
Power Supply Programmable power supply Voltage output requires accuracy of 0.3V
D
C
※ If you want more information, please refer LGST ServiceCenter Tool’s Notification “RF Calibration User Guide”.
1. SIM Tray Remove 2. Rear Cover Assy Remove 3. Screw Remove(16ea) 4. Middle cover/FPS BTB Remove
5. Screw Remove(2ea) 6. Camera cover & Speaker Remove 6. Camera cover & Speaker Remove 7. Disassemble connectors, Cable
Hook point
Hook point
8. Main/Sub PCB Remove 8. Main/Sub PCB Remove 9. Camera Remove 10. Receiver & Motor Remove
11.Side/Power key FPCB Remove 11.Speaker FPCB Remove 12. Battery Remove 13. Link FPCB Remove
EBR01
EBR05
MBL00 MBL01
EAD00 ABN00
EAD01
FAB00
EAC00 ABA01
EBP01 EBR04
EBP03 EBP02 MDS00
MJN04, MKC00
MHK01
MJN05
EBR03
EBD00
MNJ06
ABA00
MHK02 MHK00