Micrometer Adjustable Torque Wrench
(10~80FT-LBS.)
(10~150FT-LBS.)
HowTo Use
A
ancing weenchin hand with graduations visible withthe marked arrow Elementary Scale
‘up, then untock knutled handle by turning lek nut counterclockwise,
5 Set amount oorque required by turing Knulegnansietorexs exact amount cn cate
ations.
withthe 50 Lbs graduation,
2. Tum knurled handle clockwise until 6. Lbs graduation on the bevel edge ofthe handle
is inline withthe vertical ine on the ease.
whine
. Instatthe ocoper socket or attachment tothe square drive and apply fe nut or bolt and pu
handle unt you feel andlor hear wrench cick. Release pull ng wrench automalically resets
fornext operation.
00 NOT CONTINUE TO PULL AFTER WRENCH RELEASES. USE SPECIAL CARE ATLOW
TORQUE SETTINGS THAT WiLL PULL STOPS WHEN WRENCH CLICKS.
s FIG! SOFT-LB FIG2 S6FT-LB
‘CAUTION:
4. Ifwrench has not been used or has been in storage for sometime, operate i several times
‘at ow torque setting which permits special internal lubricant to re-coat internal working parts
2. When wrench ig notin use, keep doing adjustment al lowest torque setting,
3. Donatturn handle below loweet torque seting,
4 Donat contin
fof the handle anc te wrench allowed 1 automat
ply eressure aftarthe wranch hes Deen released, will result in damage
morethaa the spectied amount of fraue
inany type of cleaner which ma_ affect
‘special igh pressure ube with which the
Wrench is packed atthe factory.
7.Thistorque wrench was callbated and
MEASURING INSTRUMENT.
‘CALIBRATION AND SERVICING MUST
BE DONE REGULARLY AND IS THE
OWNERS RESPONSIBILITY.
ee sal