Professional Documents
Culture Documents
4 5
2.2 Recuperation of deflated balls 2 Then it returns to inject
pressure until the indicator
Procedure to recuperate the pressure of a flat ball is reaches the beginning of the
different than that of a new ball. In this case you must “Paddle” green zone (position
gradually present the ball to the pressure throughout 2) (independent of the type of
several days in order to avoid it from deforming. ball).
Keep the Pascal Box
In order to recuperate flat balls, they must have had a pressurized at this point for
regular use and not be badly deteriorated (both the another 72 hours.
rubber and felt must be in good condition).
3 After completing step 2,
take the needle to the ball´s
corresponding green zone and
1 After having put the balls in the keep the Pascal Box at this
container and closed the cover point for 72 hours.
firmly, use the pump to inflate
the necessary pressure to take The balls will have recuperated
the indicator to 3/4 of the their reglementary pressure
orange zone (position 1). and bounce like on the first
Keep the Pascal Box at this day.
point for 72 hours to re-load NOTE: If at any time during this procedure you observe that a ball deforms,
the inside of the ball at this it is a sign that it is no longer in good conditions to be recuperated, so you
must dispose of it.
same pressure.
6 7
3. Maintenance 4. Recommendations
With continued use, balls bring in sand and other • The manometer inside the cover is a very sensitive
impurities to the Pascal Box. When this sand settles on device and may be damaged upon an impact of the device.
an o-ring (the circular black ring located on the bottom of Please keep the manometer from dropping or from hard
the cover), it can create small losses in pressure. In order bumps in order to maintain its proper performance.
to avoid this clean and lubricate this -o-ring periodically
to guarantee an optimal seal in the cavity (either with • If your manometer shows something other than zero
vaseline, grease or oil). while it is not pressurized, it has probably been dropped.
See our Manometer Replacement Policy
If after a while since the last time the Pascal Box has
been pressurized you detect a loss in pressure, it may • Use the included pump, or any other manual pump with
be due to one of the following three causes (in order of the right nozzle. Do not use electric compressors. Do not
probability): inject any gas other than air.
1) that the cover is not closed tight enough. • The manometer may present a small angulation. This is
2) that the o-ring between the container and cover
the normal result of the assembly process that assures a
complete, hermetic seal of the container.
has sand or impurities(see previous paragraph).
3) that due to an intense use, the metallic part inside • If you have any questions see our FAQ on our website.
the injection valve has loosened slightly (see section 5:
Use of the tool cover). 5. Use of the tool cover*
8 9
cover for the injection valve and with the other you can:
• When the use, care and operation of the product does
• Press the center of the valve to release the pressure. not coincide with the instructions in the product´s user
guide.
• Adjust the inflation valve. It is not common, but
after intensive use, the metallic part inside the valve • When the product has been used for purposes other
may loosen, producing a small loss of pressure in than its aim, if it has been improperly used, hit, exposed
the container. To resolve this, insert this side of the to heat and humidity, altered by a corrosive liquid or
cover onto the valve all the way in and turn it softly substance or due to any other cause attributed to the
clockwise until it reaches its end. user.
* For more information visit our website. • When the product has been disarmed, modified or
repaired by people not authorized by the company.
6. Guarantee
• When the purchase receipt has been altered or does not
PASCAL BOX, S.L., guarantees this product against any clearly reflect its original data.
material defect and labour used for its manufacture up
to two years after its purchase. This guarantee includes
the repair, replacement or change of product and/or
components free of charge. To exercise this guarantee,
just present a copy of the purchase receipt (invoice or
online order) from the retailer where you purchased it
and contact PASCAL BOX®´s customer service.