Professional Documents
Culture Documents
T:0086-769-82166666 82136666
F:0086-769-82955240 82955241
E:mail@kinlong.com
H:www.kinlong.com
Content
Features of Kinlong UPVC Door & Window Hardware .............................................01
U groove profile requirement for Kinlong Door & Window Hardware .............................02-03
Kinlong U Groove Door & Window Hardware Product Features:
I、 Turn-and-Tilt Window Series ...............................................................04-13
Safe, Durable, Humanized
II、 Tilt-and -Turn Window Series ..............................................................14-15
1
U Groove Profile Requirement for Kinlong Door&Window Hardware
Solid wood profile specification
Kinlong hardware is applicable to standard european U-groove profile of solid wood/wood-clad
aluminium/aluminium-clad wood/PVC/aluminium. the specific requirements are as follows: ( Remark: All
Required dimension for sash and frame Required dimension for sash profile
specification is after surface treatment)
18 (20/24)
9(13)
Required dimension for frame and sash
12
16.2 ±0.2
12.2 ±0.2
18
6 9.4 ±0.2
12
Required dimension for sash and frame Required dimension for sash profile
8
13 (9)
2.5
18 (20/24)
9(13)
12
Required dimension for sash profile Required dimension for frame profile 9.4 ±0.2
16.2 ±0.2
12.2 ±0.2
18
6
16.2 ±0.2
12.2 ±0.2
3/4/6.5 Required dimension for sash and frame Required dimension for sash profile
4
4
16.2 ±0.2
12.2 ±0.2
20
6.5
9.4 ±0.2
2.5
13 (9)
12
20
5
8 9.4 ±0.2
2 /3
U-PVCTurn-and-Tilt Widow Hardware Series-SCPX100 U-PVC Turn-and-Tilt Widow Hardware Series-SCXP100
Crafted
Awarded the certificate of german We provide two plans of corrosion-resistant with standard
IFT testing agency and high degree for U groove PVC open-in bottom-hung
The turn-and-tilt window hardware system for U groove PVC hardware. It adopts high corrosion-resistant alloy coating
window launched by Kinlong, combines the special structure process and the degree of antirust is over 5 (salt-spray test
design of ventilation and position locking point,touching time is more than 1000 hours). It can be used on U groove
structure corner device(transmitter), and three-dimensional
adjustable pivot hinges with high load-bearing. High-quality pvc window of standard 12/20-9, 12/20-13, the bearing
process of high anti-corrosion alloy coating brings different capacity of which can be 130kg,suitable for the sash width
types of customers optimal perform ace ratio and wonderful 320mm-1000mm, sash height 490mm-1800mm, and it
using experience.
is your perfect companion for high-quality energy-saving
IFT-Rosenheim windows & doors technology research widows.
Institution in german, is the top testing and standards
development agency in the world, whose products certification
and quality supervision certificates are widely accepted in the
market and recognized as proof of product quality.
SRW
4 /5
1-1 SCPX100 Series Turn-and-Tilt Window Hardware System Hardware Configuration for SCPX100 Series
03 01
04 11
Configuration instruction
1. Above configuration is applicable to "9" series PVC profile, besides there is"13" series configuration.
2. Items in green are optional.
3. This configuration is applicable to (including the selective items) sash with height ranged from 901mm to 1200mm and width
06
ranged from 430mm to 600mm. this system can meet the requirement of the sash groove height 490mm-1800mm and the
11 10 width 320mm-1000mm, according to the parameters of each accessory. for details, please refer to the product series of this
catalogue. It is recommended to keep the window ratio (width/height). (W)1:1.5(H)
4. The maximum load bearing capacity of this configuration is 90kg, the load bearing capacity depends on the pivot hinge, please
refer to pivot hinge series: the sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety
15 coefficient) ≤the maximum load bearing capacity of the pivot hinge.
13 5. If need to increase the safety, then hardware with anti-theft locking point can be selected.
6. The above is only for reference. please consult our technical department for sepecific requriement.
11
12
6 /7
1-2 SCPX200 Series Turn-and-Tilt Window Hardware System Hardware Configuration for SCPX200 Series
01 Handle PZSN007 1 78 Optional, please indicate the color while placing order
Anti-misoperation
03 PFWQR001 1 128 Left & Right
device
Anti-misoperation
04 PFWK00109A 1 155 Divided into9、13series
block
05 Corner device PZJQ204 1 124 Optional
03 10
01
04
Configuration instruction
1. Above configuration is applicable to "9" series PVC profile, besides there is"13" series configuration.
2. Items in green are optional.
3. This configuration is applicable to (including the selective items) sash with height ranged from 901mm to 1200mm and width
ranged from 430mm to 600mm. this system can meet the requirement of the sash groove height 490mm-1800mm and the
width 320mm-1000mm, according to the parameters of each accessory. for details, please refer to the product series of this
11 09 catalogue. It is recommended to keep the window ratio (width/height). (W)1:1.5(H)
4. The maximum load bearing capacity of this configuration is 90kg, the load bearing capacity depends on the pivot hinge, please
refer to pivot hinge series: The sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety
12 13 coefficient) ≤the maximum load bearing capacity of the pivot hinge.
5. If need to increase the safety, then hardware with anti-theft locking point can be selected.
6. The above is only for reference. please consult our technical department for sepecific requriement.
8 /9
1-3 SCPX300 Series Concealed Turn & Tilt Window Hardware System Hardware Configuration for SCPX300 Series
13
02
04
Optional Handle Optional Corner Device Optional Limiter
04
01
03
09
Configuration instruction
1. Above configuration is applicable to "9" series PVC profile, besides there is"13" series configuration.
2. This configuration is applicable to (including the selective items) sash with height ranged from 901mm to 1200mm and width
ranged from 520mm to 720mm. This system can meet the requirement of the sash groove height 490mm-1800mm and the
width 410mm-720mm, according to the parameters of each accessory. for details, please refer to the product series of this
08 catalogue. It is recommended to keep the window ratio (width/height). (W)1:1.5(H)
14 3. The maximum load bearing capacity of this configuration is 90kg, the load bearing capacity depends on
the pivot hinge, please refer to pivot hinge series:
04 06 The sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety
coefficient) ≤The maximum load bearing capacity of the pivot hinge.
4. If need to increase the safety, then hardware with anti-theft locking point can be selected.
5. In order to ensure the tightness of the system, corner device PZJQ203 must be installed on the hinge side.
11 6. The above is only for reference. please consult our technical department for sepecific requriement.
10
10 / 11
1-4 SCPX400 Series Fire-Resistant Turn & Tilt Window Hardware System Hardware Configuration for SCPX400 Series
Handle
PZSN002
03
04
15
15
Configuration instruction:
1. This configuration can realize outdoor fire resistance 1h, besides there are other fire-resistant configurations and corresponding
10 16 fire-resistant time, please consult our technical department for details.
15
15 16 2. Above configuration is applicable to "13 series, besides there is "9" series configuration.
3. This configuration is applicable to sash with height ranged from 901mm-1200mm,width ranged from 430mm 600mm. This
16
15 configuration also can meet the requirements of sash height ranged from 490mm-1800mm,width ranged from 320mm-1000mm
11
if choose other accessories, but should refer to the parameter, please see the product series of this catalogue for details. The
05
recommended proportion is width:Height=1:1.5.
4. The maximum load bearing capacity of this configuration is 130kg, the load bearing capacity depends on the hinge,Please refer
13 to hinge series; Sash Dead Weight(The Weight of Glass、Sash Profile and other Accessories X1.4(Safety Factor)≤Maximum
12 Load Bearing Capacity of the Hinge.
5. The above is only for reference. Please consult our technical department for specific requirements.
12 / 13
2-1 SCXP100 Series Tilt-and-Turn Window Hardware System Hardware Configuration for SCXP100 Series
01 Handle PZSN017 1 80 Optional, please indicate the color while placing order
03
01
04 11
Configuration instruction
1. Above configuration is applicable to "9" series PVC profile, besides there is"13" series configuration.
2. Items in green are optional.
3. This configuration is applicable to (including the selective items) sash with height ranged from 901mm to 1200mm and width
06
ranged from 430mm to 600mm. this system can meet the requirement of the sash groove height 490mm-1800mm and the
11 width 320mm-1000mm, according to the parameters of each accessory. for details, please refer to the product series of this
10 catalogue. It is recommended to keep the window ratio (width/height). (W)1:1.5(H)
4. The maximum load bearing capacity of this configuration is 90kg, the load bearing capacity depends on the pivot hinge, please
refer to pivot hinge series: the sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety
15 coefficient) ≤the maximum load bearing capacity of the pivot hinge.
13 5. If need to increase the safety, then hardware with anti-theft locking point can be selected.
6. The above is only for reference. please consult our technical department for sepecific requriement.
11
12
14 / 15
Instructions Of Turn-and-Tilt Window and Tilt-and-Turn Window System
-2
cutting
upper pivot hinge width length size
+4
PLGNXR10904-06 430-600 448 170 Applicable to
the rod of the
PLGNXR10906-08 601-800 648 200 same size the
X figure is the
PLGNXR10908-10 801-1000 848 200 same
The sash sagging can be The air tightness, water
■ please refer to Page 183 for cutting profile adjusted, the installation tightness and weather-strip
error can be absorbed tightness can be adjusted
after window locked.
X X
19.5
Drilling drawing for bottom Transmitter not include anti-misoperation device,
Drilling drawing for handle
7.5
pivot hinge PHYXN002 anti-misoperation device needs to be ordered Misoperation device: PFWQR001
seperately and has left and right type.
(Drilling with duplicator PKMQ03A)
2-
width length size
PCDQN47505-07A 570-730 424 80 Applicable Adjust the overlap
to the rod of locking-point
PCDQN47507-09 690-900 596 105
of the and locking plate Particular
PCDQN47509-12 901-1200 896 150 same to improve the screw M4*6
size the X air-tightness of
PCDQN47512-14 1201-1450 1145 122 ±
figure is ±1.5mm window
1.
2m
9/13 Series PCDQN47512-16 1201-1600 1296 200 the same m
Installation of overturn
supporter and locking plate ■ please refer to page 183 for cutting profile
±2mm
±2mm
block and supporting cover
17 PHYXN002 PHYXNR/L0109
Adjustment illustration Adjustment illustration
16 / 17
3-1 SCPN200 Series Open-in Window Hardware System Hardware Configuration for SCPN200 Series
Optional Handle
Handle
PZSN001
02
08
Configuration instruction
1. Above configuration is applicable to "9" series PVC profile, besides there is"13" series configuration.
2. Items in green are optional.
01 3. This configuration is applicable to (including the selective items) sash with height ranged from 801mm to 1200mm and width
ranged from 450mm to 1000mm. this system can meet the requirement of the sash groove height 270mm-2200mm and the
width 450mm-1000mm, according to the parameters of each accessory. for details, please refer to the product series of this
catalogue. It is recommended to keep the window ratio (width/height). (W)1:1.5(H)
4. The maximum load bearing capacity of this configuration is 90kg, the load bearing capacity depends on the pivot hinge, please
refer to pivot hinge series: the sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety
coefficient) ≤the maximum load bearing capacity of the pivot hinge.
5. If need to increase the safety, then hardware with anti-theft locking point can be selected.
04 6. The above is only for reference. please consult our technical department for sepecific requriement.
05
07
06
18 / 19
3-2 SCPN300 Series Open-in Window Hardware System Hardware Configuration for SCPN300
03 Pivot hinge PHY010A 2 101 Please indicate the color while placing order
04
02
Configuration instruction
1. This configuration is applicable to (including the selective items) sash with height ranged from 801mm to 1000mm and width
ranged from450mm to 1000mm. this system can meet the requirement of the sash groove height 600mm-1600mm and the
width 450mm-1000mm, according to the parameters of each accessory. for details, please refer to the product series of this
catalogue. It is recommended to keep the window ratio (width/height). (W)1:1.5(H)
2. If the height between the top and bottom grooves of sash> or =900mm, It is recommended to use 3 pcs of hinges.
3. The maximum load bearing capacity of this configuration is 90kg,the load bearing capacity depends on
01 the pivot hinge, please refer to pivot hinge series:
the sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety
coefficient) ≤the maximum load bearing capacity of the pivot hinge.
4. If need to increase the safety, then hardware with anti-theft locking point can be selected.
5. The above is only for reference. please consult our technical department for sepecific requriement.
03
06
05
04
20 / 21
3-3 SCPN400 Series Open-in Window Hardware System(Safety&Micro-Ventilation) Hardware Configuration for SCPN400 Series
01 Hanlde PZSN001 1 77 Optional, please indicate the color while placing order
Optional Handle
Handle
PZSN002
08
02
01 Configuration instruction
1. Above configuration is applicable to "9" series PVC profile, besides there is"13" series configuration.
2. The maximum ventilation distance is 35mm for the this configuration.
3. Items in green are optional.
4. This configuration is applicable to (including the selective items) sash with height ranged from 801mm to 1000mm and width
ranged from 450mm to 1000mm. this system can meet the requirement of the sash groove height 800mm-1400mm and the
03
width 450mm-1000mm, according to the parameters of each accessory. for details, please refer to the product series of this
catalogue. It is recommended to keep the window ratio (width/height). (W)1:1.5(H)
5. The maximum load bearing capacity of this configuration is 130kg, the load bearing capacity depends on
the pivot hinge, please refer to pivot hinge series:
the sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety
05
coefficient) ≤the maximum load bearing capacity of the pivot hinge.
06 6. If need to increase the safety, then hardware with anti-theft locking point can be selected.
7. The above is only for reference. please consult our technical department for sepecific requriement.
07
22 / 23
Instruction of Open-in Window (Safety&Micro-ventilation)
Drilling and installation Safety & Anti-theft Open-in Side-Hung Window Accessories
Instructions
1 Pivot hinge-the duplicator PKMQ09/I and PKMQ09/II is required for pivot hinge screw holes. All
adjustable parts should be located at the initial adjustment position before installing pivot hinge.
Point system.
Mushroom Locking
Professional Anti-pry&anti-theft
Drilling drawing
for handle Operation introduction
Installation of
safety & micro-
ventilation frame
parts Drilling drawing
for handle
Locking status Contra-rotating the handle Unlock the push button , contra-
90°, open inward to realize rotating the handle to 180° from
the micro-ventilation the locking status, then the
function window can be opened inward
and side hung.
24 / 25
3-4 SCPN510 Series Open-in Fire-resistant Window System Hardware Configuration for SCPN510 Series
08
02 08 Optional Handle Optional Corner Device
06 08 Handle Corner device
08 PZSN002 PZJQFD201
10
09
01
09
Configuration instruction
1. This configuration can achieve outdoor fire resistance for 1 hour, and for other fireproof configurations and corresponding fire
resistance time, please consult the company's technical department for details.
2. Items in green are optional.
09 3. Above configuration is applicable to "13" series PVC profile, besides there is"9" series configuration.
4. This configuration is applicable to (including the selective items) sash with height ranged from 901mm to 1200mm and width
ranged from 400mm to 1000mm. this system can meet the requirement of the sash groove height 490mm-1800mm and the
05 width 400mm-1000mm, according to the parameters of each accessory. for details, please refer to the product series of this
catalogue. It is recommended to keep the window ratio (width/height).(W)1:1.5(H)
08
09 5. The maximum load bearing capacity of this configuration is 130kg, the load bearing capacity depends on
09 08 the pivot hinge, please refer to pivot hinge series: the sash weight (including the weight of glass, sash profile and
06 09 08 other accessories) X1.4 (safety coefficient) ≤the maximum load bearing capacity of the pivot hinge.
07 6. The above is only for reference. please consult our technical department for sepecific requriement.
03
06
26 / 27
3-5 SCPN520 Series Self-Locking in case of Fire & Fire-resistant Window Hardware System Hardware Configuration for SCPN520 Series
01 Handle PZSN001 1 77 Optional, please indicate the color while placing order
07
Optional Handle
Handle
08 PZSN002
08
02 08
10 08
01
Configuration instruction
1. This configuration can realize the function of window sash self-closing (automatic window closing and automatic window locking)
in case of fire, which can realize automatic window sash locking in case of fire.
2. This configuration can meet the daily opening and closing requirements, and also can locate frictionally to any angle within 90
degrees.
07 3. This configuration can realize outdoor fire resistance of 1h. besides there are other fire-resistant configurations and
08 corresponding fire-resistant time, please consult our technical department for details.
05 4. Above configuration is applicable to "9" series, besides there is "13" series configuration.
08
03 5. Items in green are optional.
08 6. This configuration is applicable to sash with height ranged from 801mm-1000mm,width ranged from 500mm-1000mm. this
configuration also can meet the requirements of sash height ranged from 601mm-2200mm,width ranged from 500mm-1000mm
if choose other accessories, but should refer to the parameter,please see the product series of this catalogue for details. the
recommended proportion is width:Height=1:1.5.
09 7. The maximum load bearing capacity of this configuration is 90kg, the load bearing capacity depends on the hinge, please refer
to hinge series; sash dead weight(the weight of glass、sash profile and other accessories)X1.4(safety factor)≤maximum
load bearing capacity of hinge.
8. The above is only for reference. please consult our technical department for specific requirements.
28 / 29
Instruction for Self-Locking Fire-resistant Hardware system
Installation Instruction
Self-closing & Step 1: Using the scale line which is at the bottom of the limiter to mark: 218mm away from the groove surface of
case of fire.
The groove surface
of the frame 218mm
Figure 1
Step 2: The limiter should be installed at the same line position (as shown in figure 1), and it is attached to
the side wall of the drain tank (as shown in figure 2);
Upper corner hinge
PHYSNR0069/13
Position of holes
Figure 2 Figure 3
Thermally sensitive glass ball, self- Self-locking, keep the
closing in case of fire. fire away.
Step 3: Connecting the pin of limiter into the pin hole of upper corner hinge(Note: it must be installed in right place).
Function Demonstration
Realize self-closing
of the window sash
30 / 31
3-6 SCPN530 Fire-resistant Hardware System Hardware Configuration for SCPN530 Series
01 Handle PZSN001 1 77 Optional, please indicate the color while placing order
02
03 Optional Handle
Handle
PZSN002
06
01
Configuration instruction
1. This configuration can realize outdoor fire resistance 0.5h, besides there are other fire-resistant configurations and
corresponding fire-resistant time, please consult our technical department for details.
2. Above configuration is applicable to "9" series PVC profile, besides there is"13" series configuration.
3. This configuration is applicable to sash with height ranged from 1001mm-1200mm,width ranged from 450mm-1000mm. this
configuration also can meet the requirements of sash height ranged from 600mm-2200mm,width ranged from 450mm-
1000mm if choose other accessories, but should refer to the parameter, see the product series of this catalogue for details.
05 the recommended proportion is width:height=1:1.5.
4. The maximum load bearing capacity of this configuration is 130kg, the load bearing capacity depends on the pivot hinge,
please refer to pivot hinge series: the sash weight (including the weight of glass, sash profile and other accessories) X1.4
03 (safety coefficient) ≤the maximum load bearing capacity of the pivot hinge.
07 5. The above is only for reference. please consult our technical department for sepecific requriement.
08
32 / 33
Instruction of Open-in Fire-resistant Window
2 Handle-drilling dimension of open-in handle refers to the center of the transmitter, the transmitter hole
should be in a concentric condition with the spindle hole of the handle.
3 Selecting the stainless steel ST4.2 self-tapping countersunk screws. the screw to fix the sash connecting
block depends on window profile.
Care for
Life
◆ Group
◆ Fire-Resistant for 60 min
to connect integral doors and Windows directly
Drilling drawing for
The hole-cut
position of the
Drilling drawing for Drilling drawing for middle hinge
bottom pivot hinge frame connecting block connection block
on sash
The hole-cut
position of
transmission
connection
Corner device 202 Bottom block on sash. The hole-cut
About the transmission
pivot hinge hole-cut please refer to
page 41 of the catalogue
position of lower
hinge connection
block on sash
34 / 35
3-7 SCPN600 Series Open-in Window Hardware System Hardware Configuration for SCPN600 Series
01 Handle PZSN001 1 77 Optional, please indicate the color while placing order
03 Upper pivot hinge PYHYSR0039A 1 100 Left & Right, divided into9、13series
04 Bottom pivot hinge PYHYXR0039A 1 100 Left & Right, divided into9、13series
02
Configuration instruction
08 1. Above configuration is applicable to "9" series PVC profile, Besides there is"13" series configuration.
2. Items in green are optional.
3. This configuration is applicable to (including the selective items) sash with height ranged from 801mm to 1000mm and width
01 ranged from650mm to 1000mm. this system can meet the requirement of the sash groove height 270mm-2200mm and the
width 650mm-1000mm, according to the parameters of each accessory. for details, please refer to the product series of this
catalogue. It is recommended to keep the window ratio (width/height). (W)1:1.5(H)
4. The maximum load bearing capacity of this configuration is 90kg, the load bearing capacity depends on
the pivot hinge, please refer to pivot hinge series:
The sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety
coefficient) ≤the maximum load bearing capacity of the pivot hinge.
5. If need to increase the safety, then hardware with anti-theft locking point can be selected.
6. The above is only for reference. please consult our technical department for sepecific requriement.
05
04
07
06
36 / 37
4-1 SCDK100 Series Double-leaf Window Hardware System With Fake Mullion Hardware Configuration for SCDK100 Series
01 Handle PZSN001 1 77 Optional, please indicate the color while placing order
Left & Right, divided into9、13series, please indicate the color while
03 Upper corner hinge PHYSNR0039 1 96 placing order, standard hardware can be purchased by sets or pieces
Left & Right, divided into9、13series, please indicate the color while
04 Upper corner hinge PHYSNL0039 1 96 placing order, standard hardware can be purchased by sets or pieces
Left & Right, divided into9、13series, please indicate the color while
05 Bottom pivot hinge PHYXNR0109 1 96 placing order, standard hardware can be purchased by sets or pieces
04 09 03 Left & Right, divided into9、13series, please indicate the color while
06 Bottom pivot hinge PHYXNL0109 1 96 placing order, standard hardware can be purchased by sets or pieces
11 11
01
Configuration instruction
1. Above configuration is applicable to "9" series PVC profile, besides there is"13" series configuration.
2. Items in green are optional.
3. This configuration is applicable to (including the selective items) sash with height ranged from1001mm to 1200mm and width
ranged from 400mm to 1000mm. this system can meet the requirement of the sash groove height 600mm-2200mm and the
width 400mm-1000mm, according to the parameters of each accessory. for details, please refer to the product series of this
catalogue. it is recommended to keep the window ratio (width/height).(W)1:1.5(H)
4. The maximum load bearing capacity of this configuration is 90kg, the load bearing capacity depends on
07 the pivot hinge, please refer to pivot hinge series:
08 the sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety
coefficient) ≤the maximum load bearing capacity of the pivot hinge.
5. The above is only for reference. please consult our technical department for sepecific requriement.
06 05
10 10
09
38 / 39
Installation Instruction of Open-in Window System
Drilling size of handle & transmitter
Upper pivot hinge installation instruction Bottom pivot hinge installation instruction Drilling tool-duplicator
20
33 2-∅6
17
43
74
C
Application
4-∅3.5 Please refer to transmitter series in this catalog to
A 7.5 15
PHYSN002K PHYXN009KA PKMQ09/II select the correct size
B ≥21 ≥28
32
C ≥65 ≥70
Adjustment
Using 4# allen key
Locking point of transmitter is ±1.5mm adjustable
t 4mm
Righ
mm
Left 2
26
Sash
20
Adjustment
Using 4# allen key /flat-head screwdriver
1. Adjust the screw to loosen the
Sash Frame Sash Frame tightness of sliding block to
adjust wind pressure resistance
PHY006/PHY008/PHY024 installation hole Duplicator PKMQ005 PHY0139/13 installation hole and window position
40 / 41
5-1 SCPW100 Series Open-out Window Hardware System Hardware Configuration for SCPW100 Series
05 Optional Handle
Handle
PZSW002
03
02 Configuration instruction
1. The load bearing capacity depends on the friction stay, please refer to friction stay series:
the sash weight(including the weight of glass, sash profile and other accessories)X1.4(safety
coefficient)≤the maximum load bearing capacity of the friction stay.
2. To improve the security better, security lock point can be installed.
3. The above is only for reference. please consult our technical department for sepecific requriement.
01
03
05
04
42 / 43
5-2 SCPW200 Series Open-out Window Hardware System Hardware Configuration for SCPW200 Series
01 Handle PZSW006 1 83 Optional, please indicate the color while placing order
Optional Handle
Handle
PZSW002
05
03
Configuration instruction
1. The load bearing capacity depends on the friction stay, please refer to friction stay series:
02
the sash weight(including the weight of glass, sash profile and other accessories)X1.4(safety
coefficient)≤the maximum load bearing capacity of the friction stay.
2. To improve the security better, security lock point can be installed.
3. The above is only for reference. please consult our technical department for sepecific requriement.
01
03
05
04
44 / 45
6-1 SCSW100 Series, Top-Hung Window Hardware System Hardware Configuration for SCSW100 Series
Optional Handle
Handle
PZSW002
03 03
Configuration instruction
1. The load bearing capacity depends on the friction stay, please refer to friction stay series:
the sash weight(including the weight of glass, sash profile and other accessories)X1.4(safety
coefficient)≤the maximum load bearing capacity of the friction stay.
06 06 2. To improve the security better, security lock point can be installed.
3. The above is only for reference. please consult our technical department for sepecific requriement.
05 05
01
02
04 04
46 / 47
Installation Instruction of Open-out Window System
12.2±0.2
Application
Please refer to transmitter series in this catalog to
A 20 22 25 30 select the correct size
B ≥28 ≥30 ≥33 ≥38
32
Cleaning
Please keep the surface clean.
Strong corrosive solvents is never allowed.
Lubrication
All the movable and mechanical friction parts of the friction
stay should be lubricated with the lubrication oil or other
Countersunk screw Pan head screw lubricant.
Friction
Stay
48 / 49
7-1 SCTL100 Series Sliding Window Hardware System Hardware Configuration for SCTL100 Series
Optional roller
1670 Roller
PSHRC001
04 06 04
Configuration instruction
1. The maximum load bearing capacity of this configuration is 40kg, the load bearing capacity depends on
the roller, please refer to roller series:
The sash weight(including the weight of glass, sash profile and other accessories)X1.4(safety
coefficient)≤the maximum load bearing capacity of the roller
02
2. The above is only for reference. please consult our technical department for sepecific requriement.
01
05
04 04
03 03 03 03
50 / 51
7-2 SCTL200 Series Sliding Window Hardware System Hardware Configuration for SCTL200 Series
Optional Roller
1670 Roller
PSHRC001
04 05 04
Configuration instruction
1. The maximum load bearing capacity of this configuration is 40kg, the load bearing capacity depends on
the roller, please refer to roller series:
The sash weight(including the weight of glass, sash profile and other accessories)X1.4(safety
coefficient)≤the maximum load bearing capacity of the roller
2. The above is only for reference. please consult our technical department for sepecific requriement.
01 02
04 04
03 03 03 03
52 / 53
8-1 SMTL300 Series Sliding Door Hardware System Hardware Configuration for SMTL300 Series
Optional Roller
12 Adjustable door roller / roller
PTMLC003K12
05
04 04
Configuration instruction
1. The maximum load bearing capacity of this configuration is 90kg, the load bearing capacity depends on the roller,
please refer to roller series: the sash weight(including the weight of glass, sash profile and other accessories)
X1.4(safety coefficient)≤the maximum load bearing capacity of the roller
2. The above is only for reference. please consult our technical department for sepecific requriement.
02 02
Note: The selection of screws and lock hook for double side manual sliding lock
01 01 L(screws length)=profile thickness(select length specifications in 5mm unit, eg. sash profile is 42mm,
the screws length suggest to be M5X40)
the lock hook could be PZDS007-SG1 or PZDS007-SG2 according to the profile.
04 04
03 03 03 03
54 / 55
8-2 SMTL400 Series Sliding Door Hardware System Hardware Configuration for SMTL400 Series
Optional Roller
07 07
Configuration instruction
02 02 1. The maximum load bearing capacity of this configuration is 160kg, the load bearing capacity depends on the roller,
please refer to roller series: the sash weight(including the weight of glass, sash profile and other accessories)
X1.4(safety coefficient)≤the maximum load bearing capacity of the roller
2. The above is only for reference. please consult our technical department for sepecific requriement.
01 01
07 06 07
04 04
03 03 03 03
56 / 57
Installation Instruction of Sliding Door & Window
Height adjustment of roller Installation illustration of single-point lock
Roller adjustment
Product code Adjusting tools Adjusting height
PTHRP001 4#Allen Key 21-26
PTHRC001 4#Allen Key 20-25
PTHRP002 4#Allen Key 21-26
PTHRC002 4#Allen Key 20-25
PTHRC003 cross screwdriver 13-14.5 Single-point lock operation requirement
PTMLP003120K12 cross screwdriver 21-26 L
Distance between
Product code Suitable profile frame
PTMLC003120K12 cross screwdriver 20-25 and sash L (mm)
PTMLP003160K12 cross screwdriver 21-26 PDDS01A Window 18
PDDS02 Door 12
PTMLC003160K12 cross screwdriver 20-25
Remark: Don't adjust the height to maximum or PDDS03A Window 14
minimum when install the roller. using spanner PTMLP00490K12 cross screwdriver 21-26
to adjust several degree back if roller height is PTMLC00490K12 cross screwdriver 20-25
maximum or minimum to make the roller take
the load uniformly. PTMLC00590K12 cross screwdriver 18-23 Installation illustration of anti-theft piece
Front Behind
window window
15±0.2
sash sash
43
2-
A
B
Try to install the anti-theft piece PFDK002
Application in the center of two tracks.
Refer to transmitter series in this catalog to select
A 12 correct transmitter
B ≥20 Adjustment
C ≥67 Use 4#allen key to adjust the tightness of locking
point of transmitter ±0.5mm
Installation instruction of pop-up handle
Initial position ① After lift knob ② Turn the handle ③ Move the sash from the colorful part
Installation illustration of anti-strike block
Behind
35
window
o
sash
≤12
Front
window
sash
Remark: Don't use the knob to slide, which will break it. put the knob back after use
58 / 59
9 SMTSTL100 Series Lifting and Sliding Door Hardware System Hardware Configuration for SMTSTL100 Series
06
09
06
06
Configuration instruction
06
1. Items in green are optional.
07 2. Perfect combination of hardware, gasket and profile to ensure the performance of air tightness、anti-dust
and sound insulation.
3. Slide smoothly, operate easily.
4. Perfect anti-theft function by using anti-theft piece even if in micro-ventilation position.
06
5. The maximum load bearing capacity of this configuration is 300kg, and the load bearing capacity depends
on the roller, please refer to roller series:
01
The sash weight(including the weight of glass, sash profile and other accessories)X1.4(safety
06
coefficient)≤the maximum load bearing capacity of the roller
06 6. This series can be used widely, such as sunshine-room,balcony, partition door etc.
7. The above is only for reference. please consult our technical department for sepecific requriement.
08
09
06
04
05
03
10
02
60 / 61
10-1 SMP100 Series Side-Hung Door Hardware System Hardware Configuration for SMP100 Series
Optional Handle
Handle
04 PMZS002
03
04
Configuration instruction
03
1. The maximum load bearing capacity of this configuration is 80kg, the load bearing capacity depends on
the pivot hinge, please refer to pivot hinge series:
02 the sash weight(including the weight of glass, sash profile and other accessories)X1.4(safety coefficient)≤the maximum
load bearing capacity of the pivot hinge.5. to better improve the security, security lock point can be installed.
01
2.To improve the security better, security lock point can be installed.
3. The above is only for reference. please consult our technical department for sepecific requriement.
Note: (1)Handle spindle length L=sash thicknessδ+30(40)mm
(2)M5 fixing screw length L=sash thicknessδ+15mm
07
03 06
04
05
03
62 / 63
10-2 SMP200 Series Side-Hung Door Hardware System Hardware Configuration for SMP200 Series
06
Optional Door Lock
05 Door lock
PMS30 / II
04
06
Configuration instruction
03 1. The maximum load bearing capacity of this configuration is 150kg, the load bearing capacity depends on
the pivot hinge, please refer to pivot hinge series:
02
the sash weight(including the weight of glass, sash profile and other accessories)X1.4(safety coefficient)≤the maximum
load bearing capacity of the pivot hinge.5. to better improve the security, security lock point can be installed.
01 2. To improve the security better, security lock point can be installed.
3. The above is only for reference. please consult our technical department for sepecific requriement.
Note: (1)Handle spindle length L=sash thicknessδ+30(40)mm
(2)M5 fixing screw length L=sash thicknessδ+15mm
08
04 06
05
07
64 / 65
10-3 SMP300 Series Side-Hung Door Hardware System Hardware Configuration for SMP300 Series
03
Optional Handle
Handle
PMZS007
03
02
06
Configuration instruction
1. The maximum load bearing capacity of this configuration is 65kg, the load bearing capacity depends on
the pivot hinge, please refer to pivot hinge series:
the sash weight(including the weight of glass, sash profile and other accessories)X1.4(safety coefficient)≤the maximum
load bearing capacity of the pivot hinge.5. to better improve the security, security lock point can be installed.
01 2.To improve the security better, security lock point can be installed.
3. The above is only for reference. please consult our technical department for sepecific requriement.
Note: (1)Handle spindle length L=sash thicknessδ+30(40)mm
(2)M5 fixing screw length L=sash thicknessδ+15mm
03
07
04
03
66 / 67
10-4 SMP400 Series Side-Hung Door Hardware System Hardware Configuration for SMP400
06
04 Optional Handle Optional Pivot Hinge
Handle Pivot hinge
PMZS007 PMHY006120
03
02
Configuration instruction
1. The maximum load bearing capacity of this configuration is 80kg, the load bearing capacity depends on
01 the pivot hinge, please refer to pivot hinge series:
The sash weight(including the weight of glass, sash profile and other accessories)X1.4(safety coefficient)≤the maximum
08 load bearing capacity of the pivot hinge.
2. To improve the security better, security lock point can be installed.
3. The above is only for reference. please consult our technical department for sepecific requriement.
03 07 Note: (1)Handle spindle length L=sash thicknessδ+30(40)mm
(2)M5 fixing screw length L=sash thicknessδ+15mm
06
04
03 05
68 / 69
10-5 SMP500 Series Smart Lock Side-Hung Door Hardware System Hardware Configuration for SMP500 Series
06
01 Configuration instruction
1. Above configuration is applicable to "13 series, besides there is "9" series configuration.
2. The maximum load bearing capacity of this configuration is 150kg, the load bearing capacity depends on the
03
hinge,Please refer to hinge series; sash dead weight(the weight of glass、sash profile and other accessories)X1.4
(safety factor)≤maximum load bearing capacity of hinge.
3. For improving the better security, security lock point can be selected.
02 4. The above is only for reference. please consult our technical department for specific requirements.
Note:
(1) The length of spindle L= sash profile thickness δ +(30~40)mm (take the common multiple of 5,
such as 42mm of profile thickness and take the 70mm as square steel length);
(2) The length of M5 screw L= profile thickness (If the value is not the common multiple of 5, the addition
value is adopted, such as 42mm of profile thickness, and 45mm of screw is taken);
(3) The length of the twist strips shown in the configuration instructions is on page 74.
04
06
05 07
70 / 71
Installation Instruction of Side-hung Door Hardware
Switch the left & right hinges of the door
Drilling size of transmitter with key Drilling size of door lock 2 2
A B 1
1
15.5 18
3 3
C
C
Selection of spindle and screws: Selection of spindle and screws: ① Door hinge of ② Disassemble the 1、2、3 ③ After rotation, ④ Door hinge of
right type door parts, and rotate clockwise assemble left type door
(1) The length of square steel L=C+(30-40)MM (1) The length of square steel L=C+(30-40)MM
the part 1 by 180 degree the 1、2、3 parts
(2) Length of M5 screw L=C+15MM (2) Length of M5 screw L=C+15MM
Adjustment (mm)
Code Washer quantity Installation
up & left & front & A
number ≤2 tool
down right rear
PMHY00180 ±3 ±5 +1/-2 15.5-18.5 PMHY00180-11A PMKMQ06
PMHY002150 ±3 ±5 +1/-2 15.5-18.5 PMHY002150-11 PMKMQ07
PMHY006120 ±3 ±5 ±1 16.5-18.5 PMHY006120DP PMKMQ09
72 / 73
Instruction of Smart Lock Hardware Instruction of Smart Lock Hardware
Surface finish:
Smart life
starts with me Pearl silver Nano black Red bronze
Configuration Instruction:
(1) spindle、screws、twist strip can be ordered separately or packaged in
complete sets;
(2) spindle PMFG8-L, L=profile thickness + (25-30)mm (take the common
multiple of 5, such as 42mm of profile thickness and 70mm of square steel);
(3) Screws M5*L, L= profile thickness (If the value is not the common multiple of 5,
the addition value is adopted, such as 42mm of profile thickness, and 45mm of
screw is taken);
Smart lock series (3) Twist strips: PNT-Lxx ( such as PNT-L65) A+20≤xx≤B+12
PMZSZR/L001 A: The distance between the center of u groove to the visible face of indoor;
B: Profile thickness;
xx: Specifications of twist strip (standard products have 3 kinds of size,
40、60、130).
Fingerprint、password、mechanical、 Virtual password anti-peep technology Note: If the specifications of the standard product are not within the scope, the twist
3 kinds of unlock functions strip should be customized, the customized length should be the common multiple
of 5, when multiple specifications are available at the same time, 65 specifications
are preferred.
3 4 Please refer to the user manual for smart profile door lock in the package
attachment or scan the QR code on the package for the operation instructions.
74 / 75
Handle Series
PZSN001 ★★ L=30.35
Handle Series
◆ Handle
L=25.30.35.40.45
◆ Applicable for open-in windows /
sliding windows & doors
PZSN002 ★ L=30.35
◆ Handle
L=25.30.35.40.45
◆ Applicable for open-in windows /
sliding windows & doors
PZSN004
PZSN005
◆ Handle
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, L=25.30.35.40.45
◆ Applicable for open-in windows /
The actual production time should be evaluated and the instructions above is for reference only.
sliding windows & doors
76 / 77
Handle Series Handle Series
◆ Handle
◆ Handle L=25.30.35.40.45
L=25.30.35.40.45 ◆ Applicable for open-in
◆ Applicable for open-in windows / windows / sliding windows & doors
sliding windows & doors ◆ Opened with same key
PZSN006S PZSN009/I
◆ Handle
◆ Plastic base
◆ Handle
plate,White only
L=25.30.35.40.45 L=25.30.35.40.45
◆ Applicable for open-in ◆ Applicable for open-in windows /
PZSN007 PZSN010
◆ Handle ◆ Handle
L=25.30.35.40.45 L=25.30.35.40.45
◆ Applicable for open-in windows / ◆ Applicable for open-in windows /
sliding windows & doors sliding windows & doors
◆ Handle
◆ Handle ◆ Plastic base
◆ 45°Position handle plate,White only
L=25.30.35.40.45 L=25.30.35.40.45
◆ Applicable for open-in windows / ◆ Applicable for open-in
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 78 / 79
The actual production time should be evaluated and the instructions above is for reference only.
Handle Series Handle Series
★★ L=30.35 PZSN014 L 61 28
PZSN023
43
7
189
◆ Handle
◆ Plastic base
plate,White only ◆ Handle
L=25.30.35.40.45 L=25.30.35.40.45
◆ Applicable for open-in ◆ Applicable for open-in
windows / sliding windows & doors windows / sliding windows & doors
PZSN017 PZSN025
L 28
43
7
◆ Handle
◆ Handle ◆ Plastic base
◆ Safety lock hand
plate,White only
L=25.30.35.40.45 L=25.30.35.40.45
◆ Applicable for open-in ◆ Applicable for open-in
windows / sliding windows & doors windows / sliding windows & doors
◆ Handle
◆ Plastic base
plate,White only
L=25.30.35.40.45 ◆ Handle
◆ Applicable for open-in L=35.40.45
windows / sliding windows & doors ◆ Applicable for open-out windows
PZSN019 PZSW002
◆ ◆ Handle
Handle
◆ White only L=35.40.45
◆ Applicable for
L=25.30.35.40.45
◆ Applicable for open-in Open-out windows
◆ Opened with same key
windows / sliding windows & doors
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 80 / 81
The actual production time should be evaluated and the instructions above is for reference only.
Handle Series Handle Series
◆ Handle ◆ Handle
L=35.40.45 L=35.40.45
◆ Applicable for open-out windows ◆ Applicable for open-out windows
◆ Handle
◆ Handle ◆ White only
L=35.40.45 L=35.40.45
◆ Applicable for open-out windows ◆ Applicable for open-out windows
PZSWR004 PZSW008
◆ Handle ◆ Handle
◆ Left & Right ◆ White only
L=35.40.45 L=35.40.45
◆ Applicable for open-out windows ◆ Applicable for open-out windows
◆ Handle
◆ White only ◆ Handle
L=35.40.45 L=35.40.45
◆ Applicable for open-out windows ◆ Applicable for open-out window
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 82 / 83
The actual production time should be evaluated and the instructions above is for reference only.
Handle Series Handle Series
PZSWR011 PMZS002
◆ Handle
L=35.40.45 ◆ Handle
◆ Left & Right ◆ Spindle specification:7x7 mm
◆ Applicable for open-out windows ◆ Applicable for side-hung doors / sliding doors
★★ PXZSR001 PMZS004
◆ Spinning handle
◆ Left & Right
◆ Handle
◆ Place order as needed for the
◆ Spindle specification:7x7 mm
cushion, quantity ≤2 nos
◆ Applicable for side-hung doors / sliding doors
◆ Applicable for open-out window Peices shim: PXZ001-08
PXZSR002 PMZS005
垫片 PXZ002-04DP
◆ Spinning handle
◆ Left & Right
◆ Lock base included ◆ Handle
◆ Place order as needed for the cushion, quantity ≤2 nos ◆ Spindle specification:7x7 mm
◆ Applicable for open-in windows ◆ Applicable for side-hung doors / sliding doors
★ PMZS001 PMZS006
◆ ◆ Handle
Handle
◆ ◆ Spindle specification:7x7 mm
Spindle specification:7x7 mm
◆ Applicable for side-hung doors / sliding doors ◆ Applicable for side-hung doors / sliding doors
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 84 / 85
The actual production time should be evaluated and the instructions above is for reference only.
Handle Series Handle Series
PMZS006S PMZS009/I
◆ Handle
◆ White only
◆ Handle
◆ Spindle specification:7x7 mm
◆ Spindle specification: 7x7 mm
◆ Handle indoor side base material is engineering plastic
◆ The key side is the inside of the room
◆ Applicable for side-hung doors / sliding doors
◆ Applicable for side-hung doors / sliding doors
PMZS006JS PMZS011
◆ Handle
◆ White only
◆ Spindle specification:7x7 mm
◆ Handle
◆ Handle indoor side base material is engineering plastic
◆ Spindle specification: 7x7 mm
L=30.35.40.45
◆ Applicable for side-hung doors / sliding doors
◆ Applicable for side-hung doors / sliding doors
PMZS007 PMZS012
162
◆ Handle ◆ Handle
L=30.35.40.45 ◆ Spindle specification: 7x7 mm
◆ Applicable for side-hung doors / sliding doors ◆ Applicable for side-hung doors / sliding doors
★ PMZS009 PMZS010 ★
132 55 10
29
21
195
85
106
◆ Handle
◆ Spindle
specification:7x7 mm
◆ The key side is the inside of the room ◆ Handle
◆ Applicable for side-hung doors ◆ Spindle specification: 8x8 mm
◆ Opened with same key ◆ Applicable for side-hung doors
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 86 / 87
The actual production time should be evaluated and the instructions above is for reference only.
Handle Series Handle Series
PMLSR002G42 PMZS011-01 ★
◆ Handle
◆ Left & right, white only
◆ Spindle
sspecification:7x7 mm
◆ Spindle length=sash
thickness+30mm
◆ Screw length=sash
thickness+10mm
◆ Exterior handle
◆ Matched with
◆ Screw length=sash thickness+10mm
pmcdqss415t series,
◆ Screw is not included
suitable for sliding door.
PMLSR003G42 PMLS01
PMLSR004G42 PMB002
10
◆ Handle
◆ Left & right, white only
◆ Spindle
specification:7x7 mm
◆ Spindle length=Sash
thickness+30mm
◆ Screw length=Sash
thickness+10mm
◆ Matched with ◆ Cover plate
PMCDQSS415T series, ◆ Screw length=Sash thickness+15mm
suitable for sliding door. L=45
PMB101 PMMB001 ★
10
◆ Cover plate
◆ Screw length=sash thickness+5mm ◆ Cover plate
◆ Screw is not included
◆ Screw length=sash thickness+15mm
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 88 / 89
The actual production time should be evaluated and the instructions above is for reference only.
Handle Series for Home Decoration Antibacterial Handle Series
The
antibacterial
rate 99.9%
PZSNJ002(Gulch-gold) PZSNJ004(Bronze)
Durable
Fast
Continuous
Product
Name Code Handle Exterior Surface Color
category ◆ The surface adopts new
Handle PZSNK001
The appearance is the same
Black/White antibacterial powder coating and
as the handle PZSN001
The appearance is the same
electrostatic spraying process.
Handle PZSNK002 as the handle PZSN002
Black/White
Open-in
The appearance is the same ◆ Sterilization, environmental
window Handle PZSNK006 Black/White
handle series
as the handle PZSN006
protection, to ensure home safety!
The appearance is the same
Handle PZSNK007 as the handle PZSN007
Black/White
Product Code Surface Finish
Specification
Optional Color The appearance is the same ◆ Open-in window handle series,
A*B*C Handle PZSNK023 Black/White
as the handle PZSN023 open-out window handle series,
PZSNJ002
Anodic oxidation
151*33*72
Gulch-gold、Satin silver、Bronze、Gun meatal
Handle P11K
The appearance is the same
as the handle P11
Black/White door handle series for your choice.
Fluorocarbon stoving varnish Gulch-gold、Satin silver、Bronze、Rose gold The appearance is the same
open-out Handle PZSWK001 Black/White
as the handle PZSW001
PZSNJ004 Fluorocarbon stoving varnish 164*33*73 Gulch-gold、Satin silver、Bronze、Rose gold window The appearance is the same
handle series Handle PZSWK006 as the handle PZSW006
Black/White
PZSNJ005 Fluorocarbon stoving varnish 164*29*60 Gulch-gold、Satin silver、Bronze、Rose gold
The appearance is the same
PZSNJR006
Fluorocarbon stoving varnish 163*29*35 Gulch-gold、Satin silver、Bronze、Rose gold
Handle PZSWK010 as the handle PZSW010
The appearance is the same
Black/White
Laser identification
PZSNJL006
Handle PMZSK001 as the handle PMZS001
Black/White
Door handle The appearance is the same
Handle PMZSK002 Black/White
Applicable system: side-hung windows、
◆
series as the handle PMZS002
The appearance is the same
Handle PMZSK010 Black/White
Sliding doors & windows as the handle PMZS010
◆ Spindle exposed: L=25.30.35.40.45
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 90 / 91
The actual production time should be evaluated and the instructions above is for reference only.
Hinge order before & after split comparison table Hinge order before & after split comparison table
Number Production name Code number Fitting name Fitting Code number Remark Number Production name Code number Fitting name Fitting code number Remark
Upper pivot hinge PHYSN002 See Item No. 9 for components Upper frame assembly PHYSN003K
1
Upper corner PHYSNR/L0029 Corner connecting rod PJBLGR/L0029 Mid sash assembly PHYZ00713SC
hinge 1 Mid pivot hinge PHYZ00713
Outer cover PHYSN003-02
Outer cover PHYSN002-03A
Outer cover PHYSN002-03A
Upper pivot hinge PHYSN002 See Item No. 9 for components
Upper corner Upper frame assembly PHYSN002K
2 PHYSNR/L00213 Corner connecting rod PJBLGR/L00213
hinge Spindle PHYZ005-01
Outer cover PHYSN002-03A 2 Mid pivot hinge PHYZ005
Outer cover PHYZ005-02
Upper pivot hinge PHYSN003 See Item No. 10 for components Outer cover PHYSN002-04
3
Upper corner PHYSNR/L0039 Corner connecting rod PJBLGR/L0039 Upper frame assembly PHYSN003K
hinge
Outer cover PHYSN002-03A Spindle PHYZ005-01
3 Mid pivot hinge PHYZ006
Upper pivot hinge PHYSN003 See Item No. 10 for components Outer cover PHYZ005-02
4
Upper corner PHYSNR/L00313 Corner connecting rod PJBLGR/L00313 Outer cover PHYSN003-02
hinge Bottom frame assembly PHYXN010KA
Outer cover PHYSN002-03A
Bottom sash assembly PHYXN002S
Upper pivot hinge PHYSN004 See Item No. 11 for components
Upper corner 4 Bottom pivot hinge PHYXN002 Outer cover PHYXN0099-05
5 PHYSNR/L0049 Corner connecting rod PJBLGR/L0029
hinge Outer cover PHYXN0099-06
Outer cover PHYSN002-03A Outer cover PHYXN002-03
Upper pivot hinge PHYSN004 See Item No. 11 for components Bottom frame assembly PHYXN009KA
6
Upper corner PHYSNR/L00413 Corner connecting rod PJBLGR/L00213 Bottom sash assembly PHYXNR/L0069S
hinge
Outer cover PHYSN002-03A 5 Bottom pivot hinge PHYXNR/L0069 Outer cover PHYXNR/L0099-07C
7
Upper corner PHYSNR/L0069 Corner connecting rod PJBLGR/L0069
Outer cover PHYXN0099-05
hinge Bottom frame assembly PHYXN009KA
Outer cover PHYSN002-03A
Bottom sash assembly PHYXNR/L00613S
Upper pivot hinge PHYSN004
Upper corner
6 Bottom pivot hinge PHYXNR/L00613 Outer cover PHYXNR/L0099-07C
8 PHYSNR/L00613 Corner connecting rod PJBLGR/L00613
hinge Outer cover PHYXN0099-06
Outer cover PHYSN002-03A Outer cover PHYXN0099-05
Upper frame assembly PHYSN002K Bottom frame assembly PHYXN009KA
9 Upper pivot hinge PHYSN002
Outer cover PHYSN002-04 Bottom sash assembly PHYXNR/L0099SC
Upper frame assembly PHYSN003K 7 Bottom pivot hinge PHYXNR/L0099 Outer cover PHYXN0099-05
10 Upper pivot hinge PHYSN003 Outer cover PHYXN0099-06
Outer cover PHYSN003-02
Outer cover PHYXNR/L0099-07C
Upper frame assembly PHYSN004K
11 Upper pivot hinge PHYSN004 Bottom frame assembly PHYXN009KA
Outer cover PHYSN003-02
Bottom sash assembly PHYXNR/L00913SC
Upper frame assembly PHYSN002K
8 Bottom pivot hinge PHYXNR/L00913 Outer cover PHYXN0099-05
Mid sash assembly PHYZ00709SC Outer cover PHYXN0099-06
12 Mid pivot hinge PHYZ00809
Outer cover PHYSN002-04 Outer cover PHYXNR/L0099-07C
Outer cover PHYSN002-03A Bottom frame assembly PHYXN010KA
Instructions Instructions
1. In order to ensure that the product performance is stable, pls exactly ensure the use of the matched frame 1. In order to ensure that the product performance is stable, pls exactly ensure the use of the matched frame
and sash fitting components as shown in the table. not be free to match. and sash fitting components as shown in the table. not be free to match.
2. Standard color order can be placed with product code no or fitting code no, non-standard colors only with 2. Standard color order can be placed with product code no or fitting code no, non-standard colors only with
fitting code sr. fitting code sr.
92 / 93
Hinge Series
PHYSNR0029 ★ Separated
PHYSNR00213
01
Hinge Series
02
★ Separated
PHYZ00809
PHYZ00813
01
02
PHYXNR0099 ★ Separated
P HY X N R 010 9 PHYXNR00913
U groove Hinge Bottom Open-in Right style Serial number 9 Series
door and
window 01
02
139
③ PHYXN0099-05
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 94 / 95
The actual production time should be evaluated and the instructions above is for reference only.
Hinge Series Hinge Series
★★ Separated
PHYSNR0039 PHYSNR0069
PHYSNR00313 121.8 PHYSNR00613
86.6
01 01
9(13)
36(40)
02
161.3
02
◆ Upper corner hinge ◆ Upper corner hinge
◆ Left&Right ◆ Left&Right
◆ Match with bottom pivot hinge ◆ Match with bottom pivot hinge
◆ Please indicate the outer cover color while placing order ◆ Please indicate the outer cover color while placing order
◆ The standard products can be ordered as one whole set or separately ◆ The standard products can be ordered as one whole set or separately
◆ Outer cover:① PHYSN003-02 、② PHYSN002-03A ◆ Outer cover:① PHYSN003-02 、② PHYSN002-03A
01
01 02
02
50
114
★★ Separated
PHYXNR0109 PHYXNR0069
PHYXNR01013 PHYXNR00613
146
01
01
02 02
9(13)
36(40)
132
◆ ◆
129
Bottom pivot hinge Bottom pivot hinge
◆ Left & Right ◆ Left & Right
◆ Maximum bearing capacity is 90KG ◆ Maximum bearing capacity is 90KG
◆ Please indicate the outer cover color while placing order ◆ Please indicate the outer cover color while placing order
◆ The standard products can be ordered as one whole set or separately ◆ The standard products can be ordered as one whole set or separately
03 03
◆ Outer cover:① PHYXNR0099-07C、② PHYXN0099-06、 ◆ Outer cover:① PHYXNR0099-07C、② PHYXN0099-06、
③ PHYXN0099-05 ③ PHYXN0099-05
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 96 / 97
The actual production time should be evaluated and the instructions above is for reference only.
Hinge Series Hinge Series
PHYSNR0049 PZJS001
PHYSNR00413
01
11
20
14 54
02 ◆ Upper corner hinge
◆ Left & Right
◆ Match with bottom pivot hinge
◆ Please indicate the outer cover color while placing order ◆ Mid pivot hinge
◆ The standard products can be ordered as one whole set or separately ◆ Please indicate the color while placing order
◆ Outer cover:① PHYSN003-02、② PHYSN002-03A ◆ Suitable for open-in window(door)
★ Separated ★
PHYXN002 PYZS0049
01 PYZS00413
02
Gasket PHYXN002SDP
(can be used for the sash
profile which edge incline is
15 degree.)
③ PHYXN0099-05 ◆ Suitable for open-in window (door), match with the corner hinges
PHYZ005 PYZS0059
01 PYZS00513
02
PHYZ006 PYZS0039
PYZS00313
01
02
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 98 / 99
The actual production time should be evaluated and the instructions above is for reference only.
Hinge Series Hinge Series
PYHYSR0039A PHY010A(H=17.5)
PYHYSR00313A PHY028A(H=19.5)
◆ Pivot hinge
◆ Concealed upper pivot hinge, Left & Right
◆ White only
◆ Suitable for open-in side-hung window
◆ Suitable for open-in window, maximum bearing capacity is 60KG
◆ Lncluding shim: PYHY003DPA
PYHYXR0039A PHY0139
PYHYXR00313A PHY01313
41
shim I thickness
1.1mm
◆ Concealed bottom
shim II thickness
Pivot hinge, Left&Right
◆ Pivot hinge 2.5mm
◆ Suitable for open-in
◆ White only
window(turn-and-tilt window, tilt-and-turn window)
◆ Please indicate the color while placing order
◆ Suitable for side-hung window
◆ Suitable for open-in window, maximum bearing capacity is 50KG
◆ Matching with concealed upper pivot hinge. maximum load bearing
◆ Shim included
capacity is 90kg.
◆ Lncluding shim: PYHY003DPA
PHY01709
PHY006(H=15) PHY01713
★★ Separated PHY006/07/08/09
PHY007(H=15)
PHY008(H=17.5)
56.2
56.2
PHY009(H=17.5)
PHY024(H=22.5)
Shim PHY00602-08 10 0 45.4 45.4
9 Series 13 Series
◆ Hinge
◆ Suitable for open-in window, maximum load bearing capacity is 60kg
◆ Hinge of PHY006, PHY008, PHY024 are adjustable for 3mm by left & right
◆ Free shims can be available if needed, quantity ≤2 Pcs
shim I thickness
◆ Hinge of PHY006, PHY007, PHY008, PHY009 must be placed separately, see
1.1mm
the chart for details
shim II thickness
◆ Please indicate the color while placing Hinge cover and Frame component
◆ Pivot hinge 2.5mm
◆ Hinge PHY024 no need to be separate while placing a order, but shall indicate
◆ White only
the color
◆ Suitable for open-in window, maximum bearing capacity is 40KG
◆ Sash component: ① PHY006S、② PHY007S
01 02 ◆ Shim included
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 100 / 101
The actual production time should be evaluated and the instructions above is for reference only.
Hinge Series Hinge Series
PHY011
Shim PHY00602-08
PHY012
◆Pivot hinge
◆ ◆Pivot hinge
White only
◆ Please indicate the color while placing order PHY016 ◆White only
◆ Suitable for open-in window, ◆ Suitable for side-hung window,
PHY019
★
PMHY00180
PHY019/5
PHY019/15
96.5
Shim PMHY00180-11A
Shim PMHY005DP
◆Pivot hinge
◆Pivot hinge ◆ Suitable for side-hung door,
◆ Please indicate the color while placing order maximum bearing capacity is 80KG
◆ Suitable for open-in window, ◆ Please indicate the color while placing order
maximum bearing capacity is 40KG ◆ Place order as needed for the cushion, quantity ≤2 nos
◆ Place order as needed for the cushion, quantity ≤2 nos ◆ Default right-style packaging, please indicate if you want left
PHY020 PMHY002150
PHY020/5
PHY020/15
Shim PMHY005DP
◆Pivot hinge
◆ Suitable for side-hung door,
◆Pivot hinge
◆ Please indicate the color while placing order
maximum bearing capacity is 150KG
◆ Please indicate the color while placing order
◆ Suitable for open-in window,
◆ Place order as needed for the cushion, quantity ≤2 nos
maximum bearing capacity is 40KG
◆ Default right-style packaging, please indicate if you want left
◆ Place order as needed for the cushion, quantity ≤2 nos
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 102 / 103
The actual production time should be evaluated and the instructions above is for reference only.
Hinge Series Solution for Concealed Hardware system
PMHY005
Concealed hinge
◆ The design of single groove for transmitting, making the transmission more smoothful;
◆ Maximum load bearing capacity is 90kg;
◆ Split-type installation, save time and effort, suitable for open-in windows, turn & till windows.
1.5
Shim PMHY005DP
◆Pivot hinge
◆ Please indicate the color while placing order
◆ Suitable for side-hung door,
maximum bearing capacity is 80KG
◆ Place order as needed for the cushion, quantity ≤2 nos
PMHY006120
◆ Pivot hinge
◆ Suitable for side-hung door,
maximum bearing capacity is 120KG
◆ White only
◆ Place order as needed for the cushion, quantity ≤2 nos
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 104 / 105
The actual production time should be evaluated and the instructions above is for reference only.
UPVC Door&Window Duplicator Series UPVC Door&Window Duplicator Series
Frame
Sash Frame
This duplicator is used to install Name of Sash This duplicator is used to
Name of the fitting Series code Sash border Series code
the following pivot hinge the fitting border install the following pivot hinge
Frame
Sash Frame
This duplicator is used to install Name of Series Sash This duplicator is used to install
Name of the fitting Series code Sash border
the following pivot hinge the fitting code border the following pivot hinge
PHYSN002K、PHYSN004K、 PHY010A
Duplicator PKMQ09/II 18、20、22 Duplicator PKMQ12 20
PHYXN009KA PHY028A
Sash Sash
This duplicator is used to install Name of the This duplicator is used to install the
Name of the fitting Series code Sash border Series code Sash border
the following pivot hinge fitting following pivot hinge
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 106 / 107
The actual production time should be evaluated and the instructions above is for reference only.
Sash Frame
Sliding Series
Sash Frame
Sash Frame
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 108 / 109
The actual production time should be evaluated and the instructions above is for reference only.
Sliding Series Sliding Series
★★ PDHRC001 PDHRC004
PDHRP001
★ PDHRC001A PDCLC001
PDCLP001
PDHRP001A PSCLC001
PSCLP001
PDHRC002 PSHRC002
12.5
PSHRP002
Note: For order quantity less than1000 sets with standard color, the Production Time Symbol ★★< 7days, ★< 10days, none > 15days, 110 / 111
The actual production time should be evaluated and the instructions above is for reference only.
Sliding Series Sliding Series
★★ PSHRC001 PTHRC001
PSHRP001
PTHRP001
PSHRC004A
PTHRC002 ★★
PTHRC002
PTHRP002 PTHRP002 ★
PSHRC003
PTMLC003120K12
◆ 15 Adjustable double roller PTMLP003120K12
◆ Used for window (Light duty door), maximum load bearing
capacity is 60kg/2pcs
★ PTHRC003
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 112 / 113
The actual production time should be evaluated and the instructions above is for reference only.
Sliding Series Sliding Series
PTMLP003160K12 PZSY001
PTMLC003160K12
◆ Concealed knob
◆ Spindle specification:7x7 mm L=25.30.35.40.45
◆ Please indicate the color while placing order.
PZSY003
PTMLP00490K12 ◆ Concealedknob
◆ Spindle specification:7x7 mm L=25.30.35.40.45
PTMLC00490K12 ◆ Please indicate the color while placing order.
★★
PYSL001/I(A=20)
PYSL001/II(A=26.5)
◆ Crescent lock
◆ Left & Right
◆ Please indicate the color while placing order
PYSL002(A=20)
◆ 12 Adjustable door roller, grooved roller / flat roller
◆ Used for door, maximum load bearing capacity is 90kg/2pcs PYSL002A(A=26.5)
PTMLC00590K12
◆ Crescent lock
◆ Left & Right
◆ Please indicate the color while placing order
★
PYSL003
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 114 / 115
The actual production time should be evaluated and the instructions above is for reference only.
Sliding Series Sliding Series
PYSL004 PZDSL002 ★
◆ Crescent lock
◆ White only Lock hook PSG001
◆ Left & Right
PZDSL005
◆ Crescent lock
◆ White only
◆ Left & Right
PSDS007(A=20)
◆ Manual sliding lock, A
PSDS007/I(A=27)
including lock hook
◆ Please indicate the
Lock Plate PDDS01-04A
4.5
PDDS02
PZDS007-SG2
PZDS007-SG1
◆ Manual lock, Including lock hook
◆ Please indicate the
color while placing order
◆ Excluding lock PZDS007-SG1/PZDS007-SG2
4.5
PZDS007-SG2
PZDS007-SG1
◆ ◆ Double manual sliding lock,
Manual sliding lock,
including lock hook Including screws, lock hook.
◆ Please indicate the ◆ Please indicate the color
Lock plate PDDS02-04
color while placing order while placing order.
◆ The gap between sash and frame is 14mm ◆ Excluding screws, lock PZDS007-SG1/PZDS007-SG2
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 116 / 117
The actual production time should be evaluated and the instructions above is for reference only.
Sliding Series Sliding Series
PSG003(A=0º) 57
PSG009 ★★
PSH003/5(A=5º) 7.5
PSG003/15(A=15º)
24
28. 5
1.2
A
◆ ◆
7.5
Lock hook Lock hook
★ PSG005A PSK003A ★★
PSG006 PSK006
15 °
29.2
3°
5°
PSG007 PSK008 ★
12
◆ Lock hook ◆ Lock seat
★★ PSG008 PSK103 ★
64
39
24
9
13
7.5
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 118 / 119
The actual production time should be evaluated and the instructions above is for reference only.
Sliding Series Sliding Series
PSK107 PFZK003 ★
9.7
12.8
◆ Lock seat
◆ Anti-strike block
★ PFDK002 PFZK004 ★
★★ PFZK001 PFZK005
PFZK002
◆ Anti-strike block
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 120 / 121
The actual production time should be evaluated and the instructions above is for reference only.
Solution for Heary-Duty Bearing Capacity Hardware System
160kg Roller
◆ Suitable for UPVC sliding door system;
◆ Maximum load bearing capacity is 160kg, suitable for the bigger specifications' sliding door Corner Device, Connecting Rod, Linking Rod and Transmitter Series
hardware system;
◆ Both flat wheel and grooved wheel have adjustable function, suitable for more kinds of profile.
122 / 123
Corner Device Series Corner Device Series
Inward Anti-Theft
Type Type(FD)
◆ Corner device ◆ Corner device
★★ PZJQ202 PZJQ006
◆ Corner device
◆ For tilt & turn / turn & tilt windows ◆ Corner device
★ PZJQ203 PFZZCN001A ★
PZJQ204 PFZZCX001A
PZJQFD204
Inward Anti-Theft
◆
Type Type(FD) ◆ Overturn supporter
Corner device
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 124 / 125
The actual production time should be evaluated and the instructions above is for reference only.
Connecting Rod / Linking Rod Series Socket Series
Concealed Pull Rod (Turn-and-Tilt Window Series) Socket PCX001 Socket PCXGN012
◆ Left&Right
◆ Including shim PYHY003DPA
◆ The minimum width of the sash can be 410mm
Applicable width Profile serie Series code Applicable width Profile serie Series code
520-720 9 series PYLGNXR00905-07A 520-720 13 series PYLGNXR01305-07A
◆ Left&Right
◆ Including shim PYHY003DPA
◆ The minimum width of the sash can be 410mm
if choose the corner device PZJQ006 Applicable height Length of rod Quantity of locking point Series code
Selective 398 1 ★★ PBCDG004
Applicable width Profile serie Series code Applicable width Profile serie Series code
Selective 498 1 ★ PBCDG005
430 - 600 9 series ★★ PLGNXR10904-06 430 - 600 13 series ★ PLGNXR11304-06
★ PBCDG006
★ PLGNXR10906-08
Selective 598 1
601 - 800 9 series 601 - 800 13 series PLGNXR11306-08
Selective 798 2 PBCDG008
801 - 1000 9 series PLGNXR10908-10 801 - 1000 13 series PLGNXR11308-10
if choose the corner device PZJQ006 Applicable height Length of rod Series code
Applicable width Profile serie Series code Applicable width Profile serie Series code 1200 -1500 1095 PCXGN012-15A
430 - 600 9 series PLGXNR10904-06 430 - 600 13 series PLGXNR11304-06 1500-1900 1495 PCXGN015-19A
601 - 800 9 series PLGXNR10906-08 601 - 800 13 series PLGXNR11306-08 1900-2300 1895 PCXGN019-23A
801 - 1000 9 series PLGXNR10908-10 801 - 1000 13 series PLGXNR11308-10
PNDQ001
Linking Rod
19.5
19.5
Inward Anti-Theft Inward
7.5
7.5
Type Type(FD) Type
Transmitter not include Anti-misoperation device,anti-misoperation device needs to
be ordered seperately and has left and right type. Transmitter does not include micro-ventilation device, It needs to be ordered separately
Quantity Series code Quantity of locking
Applicable Length of Applicable height Length of rod Series code Remarks
of locking Remarks point
height rod Inward type Anti-theft type
point
801-1000 780 2 PCDQAF47508
570-730 424 0 PCDQN47505-07A --- Safety micro-ventilator
700-900 596 1 PCDQN47507-09 PCDQFD47507-09 1001-1200 980 3 PCDQAF47510 suitable for open-in
Multi-sides transmitter windows
901-1200 896 1 ★★ PCDQN47509-12 PCDQFD47509-12 suitable for open-in 1201-1400 1180 3 PCDQAF47512
1201-1450 1145 1 PCDQN47512-14 PCDQFD47512-14 windows
19.5
7.5
Inward
Inward Sliding Anti-Theft Type
Type Type Type(FD)
Quantity Series code Applicable height Length of rod Quantity of locking point Series code Remarks
Applicable Length of
of locking Remarks
height rod
point Inward type Sliding type Anti-theft type 601-800 580 2 PCDQS07506
260-400 244 2 PCDQND47503 PCDQT47503 PCDQFD47503 801-1000 780 2 PCDQS07508 Double sides
401-600 350 2 ★ PCDQND47504 PCDQT47504 PCDQFD47504 1001-1200 980 3 PCDQS07510 transmitter
suitable for
601-800 580 2 ★★ PCDQND47506 PCDQT47506 PCDQFD47506 1201-1400 1180 3 PCDQS07512 open-in windows
Single side
801-1000 780 2 ★★ PCDQND47508 PCDQT47508 PCDQFD47508 transmit 1401-1600 1380 4 PCDQS07514
1001-1200 980 3 ★★ PCDQND47510 PCDQT47510 PCDQFD47510 type suitable
for open-in
1201-1400 1180 3 ★★ PCDQND47512 PCDQT47512 PCDQFD47512 windows、
1401-1600 1380 4 PCDQND47514 PCDQT47514 PCDQFD47514 sliding windows
& doors
1601-1800 1580 4 PCDQND47516 PCDQT47516 PCDQFD47516
1801-2000 1780 4 PCDQND47518 PCDQT47518 PCDQFD47518
2001-2200 1980 4 PCDQND47520 PCDQT47520 PCDQFD47520
Note: For order quantity less than1000 sets with standard color, the Production Time Symbol ★★< 7days, ★< 10days, none > 15days, 128 / 129
The actual production time should be evaluated and the instructions above is for reference only.
Transmitter Series Transmitter Series
19.5
Anti-misoperation Device PFWQR001
7.5
Inward Anti-Theft
Anti-Theft Type Type(FD)
Type(FD)
Transmitter not include Anti-misoperation device,anti-misoperation device needs to
Quantity of locking be ordered seperately and has left and right type.
Applicable height Length of rod Series code Remarks
point
601-800 580 2 PCDQZB47506 Series code
Applicable Quantity of
Length of rod Remarks
801-1000 780 2 PCDQZB47508 height locking point Inward type Anti-theft type
1001-1200 980 3 PCDQZB47510 490-730 430 0 PCDQN41505-07A ---
Single side transmit
1201-1400 1180 3 PCDQZB47512 suitable for fire- 700-900 602 1 PCDQN41507-09 PCDQFD41507-09
resistant open-in Multi-sides transmitter
1401-1600 1380 4 PCDQZB47514 901-1200 902 1 PCDQN41509-12 PCDQFD41509-12 suitable for open-in
windows
1601-1800 1580 4 PCDQZB47516 windows
1201-1450 1150 1 PCDQN41512-14 PCDQFD41512-14
1801-2000 1780 4 PCDQZB47518 1201-1600 1302 1 PCDQN41512-16 PCDQFD41512-16
2001-2200 1980 4 PCDQZB47520
Backset is 15mm
Backset is 15mm
Micro-ventilation device
PCDQAF475K09/13
27
15
Anti-misoperation Device PFWQR001
Side-Hung
42
Anti-Theft
Type
Transmitter not include Anti-misoperation device,anti-misoperation device needs to
Quantity of locking be ordered seperately and has left and right type.
Applicable height Length of rod Series code Remarks
point
Quantity of locking
700-900 602 1 PCDQFH41507-09 Applicable height Length of rod Series code Remarks
point
Multi-sides transmitter
901-1200 902 1 PCDQFH41509-12 suitable for fire- 700-900 602 1 PCDQN03007-09
1401-1450 1150 1 PCDQFH41512-14 resistant open-in
901-1200 902 1 PCDQN03009-12 Multi-sides transmitter
windows
suitable for
1201-1600 1302 1 PCDQFH41512-16 1201-1450 1150 1 PCDQN03012-14 open-in windows
1201-1600 1302 1 PCDQN03012-16
27
15
42
Anti-Theft Inward Sliding Anti-Theft
Type
Type(ND) Type(T) Type(FD)
Quantity of locking
Applicable height Length of rod Series code Remarks Series code
point Applicable Length of Quantity of
Remarks
601-800 586 2 PCDQZB41506 height rod locking point Inward type Sliding type Anti-theft type
801-1000 786 2 PCDQZB41508 400-600 356 2 PCDQND03004 PCDQT13004 PCDQFD03004
1001-1200 986 3 PCDQZB41510 Transmitter 601-800 586 2 PCDQND03006 PCDQT13006 PCDQFD03006
1201-1400 1186 3 PCDQZB41512 suitable for 801-1000 786 2 PCDQND03008 PCDQT13008 PCDQFD03008
fire-resistant
1401-1600 1386 4 PCDQZB41514 1001-1200 986 3 PCDQND03010 PCDQT13010 PCDQFD03010 Single side transmitter
open-in
windows 1201-1400 1186 3 PCDQND03012 PCDQT13012 PCDQFD03012 suitable for open-in
1601-1800 1586 4 PCDQZB41516
windows、sliding
1801-2000 1786 4 PCDQZB41518 1401-1600 1386 4 PCDQND03014 PCDQT13014 PCDQFD03014 windows & doors
2001-2200 1986 4 PCDQZB41520 1601-1800 1586 4 PCDQND03016 PCDQT13016 PCDQFD03016
1801-2000 1786 4 PCDQND03018 PCDQT13018 PCDQFD03018
2001-2200 1986 4 PCDQND03020 PCDQT13020 PCDQFD03020
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 132 / 133
The actual production time should be evaluated and the instructions above is for reference only.
Transmitter Series Transmitter Series
47
Series code
35
Length of Quantity of
Side-Hung Applicable height Remarks
rod locking point Open-out type Sliding type
Transmitter not include Anti-misoperation device,anti-misoperation device needs to
270-400 250 2 PCDQWD22003 PCDQT22003
be ordered seperately and has left and right type.
401-600 356 2 ★ PCDQWD22004 PCDQT22004
Applicable height Length of rod
Quantity of locking
Series code Remarks 601-800 586 2 ★ PCDQWD22006 PCDQT22006
point
801-1000 786 2 ★★ PCDQWD22008 PCDQT22008 Single side
700-900 602 1 PCDQN03507-09 transmitter
Multi-sides transmitter 1001-1200 986 3 ★★ PCDQWD22010 PCDQT22010 suitable for
901-1200 902 1 PCDQN03509-12
suitable for 1201-1400 1186 3 PCDQWD22012 PCDQT22012 open-out
1201-1400 1150 1 PCDQN03512-14 open-in windows windows、sliding
1401-1600 1386 4 PCDQWD22014 PCDQT22014 windows & doors
1201-1600 1302 1 PCDQN03512-16
1601-1800 1586 4 PCDQWD22016 PCDQT22016
1801-2000 1786 4 PCDQWD22018 PCDQT22018
2001-2200 1986 4 PCDQWD22020 PCDQT22020
Backset is 35mm
Backset is 22mm
29.5
47
35
Open-Out Sliding
Inward Sliding Anti-Theft Type(WD) Type(T)
Type(ND) Type(T) Type(FD)
Quantity of Series code
Quantity Series code Applicable height Length of rod Remarks
Applicable Length of locking point Open-out type Sliding type
of locking Remarks
height rod Inward type Sliding type Anti-theft type
point 401-600 356 2 PCDQWD32204 PCDQT32204
400-600 356 2 PCDQND03504 PCDQT03504 PCDQFD03504 601-800 586 2 PCDQWD32206 PCDQT32206
601-800 586 2 PCDQND03506 PCDQT03506 PCDQFD03506
801-1000 786 2 PCDQWD32208 PCDQT32208
801-1000 786 2 PCDQND03508 PCDQT03508 PCDQFD03508 Single side
1001-1200 986 3 PCDQWD32210 PCDQT32210 transmitter
1001-1200 986 3 PCDQND03510 PCDQT03510 PCDQFD03510 Single side transmitter suitable for
suitable for open-out 1201-1400 1186 3 PCDQWD32212 PCDQT32212
1201-1400 1186 3 PCDQND03512 PCDQT03512 PCDQFD03512 open-out
windows、sliding windows & 1401-1600 1386 4 PCDQWD32214 PCDQT32214 windows、sliding
1401-1600 1386 4 PCDQND03514 PCDQT03514 PCDQFD03514 doors windows & doors
1601-1800 1586 4 PCDQND03516 PCDQT03516 PCDQFD03516 1601-1800 1586 4 PCDQWD32216 PCDQT32216
19
Open-Out Sliding
Type(WD) Type(T) Sliding Sliding
Type(I) Type(II)
Quantity of Series code Series code Series code
Applicable height Length of rod Remarks Length of Quantity of locking
Remarks
Sliding type I Sliding type II
locking point Open-out type Sliding type rod point
401-600 356 2 PCDQWD22504 PCDQT22504 600 2 PCDQ01206/ I PCDQ01206/ II
601-800 586 2 PCDQWD22506 PCDQT22506 800 2 PCDQ01208/ I PCDQ01208/ II Transmitter
801-1000 786 2 PCDQWD22508 PCDQT22508 1000 3 PCDQ01210/ I PCDQ01210/ II without groove
Single side
suitable for sliding
1001-1200 986 3 PCDQWD22510 PCDQT22510 transmitter 1200 3 PCDQ01212/ I PCDQ01212/ II doors
suitable for
1201-1400 1186 3 PCDQWD22512 PCDQT22512 1400 3 PCDQ01214/ I PCDQ01214/ II
open-out
1401-1600 1386 4 PCDQWD22514 PCDQT22514 windows、sliding
windows & doors
1601-1800 1586 4 PCDQWD22516 PCDQT22516 Backset is 15mm
1801-2000 1786 4 PCDQWD22518 PCDQT22518
2001-2200 1986 4 PCDQWD22520 PCDQT22520
Backset is 30mm 92
15
15
29
Sliding Type
Match with handle series
Quantity of locking
Applicable height Length of rod Series code Remarks
point
1600-1800 1595 4 PMCDQTSS41516K92
Transmitter suitable for
Open-Out Sliding 1801-2000 1795 4 PMCDQTSS41518K92
sliding doors
Type(WD) Type(T) 2001-2200 1995 4 PMCDQTSS41520K92
Quantity of Series code
Applicable height Length of rod Remarks
locking point Open-out type Sliding type Backset is 30/35mm
401-600 356 2 PCDQWD03004 PCDQT03004
601-800 586 2 PCDQWD03006 PCDQT03006
801-1000 786 2 PCDQWD03008 PCDQT03008
1001-1200 986 3 PCDQWD03010 PCDQT03010 Single side transmitter
suitable for open-out
1201-1400 1186 3 PCDQWD03012 PCDQT03012
windows、sliding
1401-1600 1386 4 PCDQWD03014 PCDQT03014 windows & doors Side-Hung
Quantity of Centre
1601-1800 1586 4 PCDQWD03016 PCDQT03016 Applicable height Length of rod Series code Remarks
locking point distance
1801-2000 1786 4 PCDQWD03018 PCDQT03018 1600-2800 800 2 30 ★ PMCDQS33008 Integrated type
suitable for
2001-2200 1986 4 PCDQWD03020 PCDQT03020 1600-2800 800 2 35 PMCDQS33508 side-hung doors
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 136 / 137
The actual production time should be evaluated and the instructions above is for reference only.
Transmitter Series Transmitter Series
Side-Hung Side-Hung
Quantity of Centre Quantity of
Applicable height Length of rod Series code Remarks Applicable height Length of rod Centre distance Series code Remarks
locking point distance locking point
1600-2800 800 2 30 PMCDQSS33008 Integrated Type 1800-2200 1786 4 PMCDQSS14018
suitable for 40mm
1600-2800 800 2 35 PMCDQSS33508 2000-2400 1986 4 PMCDQSS14020 Integrated type
side-hung doors
suitable for
1800-2200 1786 4 PMCDQSS14518 side-hung doors
45mm
Backset is 30/35mm 2000-2400 1986 4 PMCDQSS14520
Backset is 40/45mm
Side-Hung
Quantity of Centre Side-Hung
Applicable height Length of rod Series code Remarks
locking point distance Quantity of
Applicable height Length of rod Centre distance Series code Remarks
1800-2200 1786 4 PMCDQS23018 locking point
30 1800-2200 1786 4 PMCDQS24018
2000-2400 1986 4 PMCDQS23020 Integrated type
suitable for 40mm Integrated type
2000-2400 1986 4 PMCDQS24020
1800-2200 1786 4 PMCDQS23518 side-hung doors suitable for
35 1800-2200 1786 4 PMCDQS24518
2000-2400 1986 4 PMCDQS23520 45mm side-hung doors
2000-2400 1986 4 PMCDQS24520
Backset is 30/35mm
Backset is 40/45mm
Side-Hung Side-Hung
Quantity of Centre
Applicable height Length of rod Series code Remarks Quantity of
locking point distance Applicable height Length of rod Centre distance Series code Remarks
locking point
1800-2200 1786 4 PMCDQSS23018
30 1800-2200 1786 4 PMCDQSS24018
2000-2400 1986 4 PMCDQSS23020 Integrated type 40mm Integrated type
suitable for 2000-2400 1986 4 PMCDQSS24020
1800-2200 1786 4 PMCDQSS23518 suitable for
side-hung doors 1800-2200 1786 4 PMCDQSS24518 side-hung doors
35 45mm
2000-2400 1986 4 PMCDQSS23520 2000-2400 1986 4 PMCDQSS24520
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 138 / 139
The actual production time should be evaluated and the instructions above is for reference only.
Door lock Series Door lock Series
Applicable height Length of rod Centre distance Series code Remarks Applicable height Length of rod Centre distance Series code Remarks
1400-2800 300 30 PMS30/IAFX 1400-2800 300 30 ★ PMS30/IA
For multi-points For multi-points
1400-2800 300 35 PMS35/IAFX 1400-2800 390 35 PMS35/IA
140 / 141
Cylinder Series Limiter Series
★★ PSX4242/T ★★ PSX4242
★ PSX4247/T ★ PSX4247
PFC050008
PFC050014
PFC0900
In door
Instructions
A is for the space from the key to cylinder center .
B is for the space from the knob to cylinder center .
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 142 / 143
The actual production time should be evaluated and the instructions above is for reference only.
PHCP0100 Series (K18) PHCP0100 Series (K22)
A
B
C
D
E
F
G
H
I
J
Assembly Dimension Unit(mm) Technical Parameter Assembly Dimension Unit(mm) Technical Parameter
Max. Window Max. Window Max. Window Max. Opening Max. Window Max. Window Max. Window Max. Opening
Type A B C D E F G H I J Height (mm) Width (mm) Weight (Kg) Angle
Type A B C D E F G H I J Height (mm) Width (mm) Weight (Kg) Angle
PHCP010012K18 310 211 118 73 39 297 239 211 141 32 1300 500 17.5 45°/88° PHCP010012K22 312 216 115 65 39 300 246 220 156 32 1400 500 25 45°/88°
PHCP010014K18 359 228 133 88 39 348 302 227 153 31 1400 600 21.5 45°/88° PHCP010014K22 361 232 130 90 65 350 304 238 162 32 1500 600 28 45°/88°
PHCP010016K18 409 246 149 104 39 397 346 250 160 31 1500 650 25.5 45°/88° PHCP010016K22 412 252 149 109 63 400 354 263 171 32 1600 700 33 45°/88°
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 144 / 145
The actual production time should be evaluated and the instructions above is for reference only.
PHCS0100 Series (K18) PHCS0100 Series (K22)
Assembly Dimension Unit(mm) Technical Parameter Assembly Dimension Unit(mm) Technical Parameter
Max. Window Max. Window Max. Window Max. Opening Max. Window Max. Window Max. Window Max. Opening
Type A B C D E F G H I J K Height (mm) Width (mm) Weight (Kg) Angle
Type A B C D E F G H I J K Height (mm) Width (mm) Weight (Kg) Angle
PHCS010012K18 317 163 121 62 36 307 224 196 163 138 30 750 1100 29 25°/30° PHCS010012K22 317 163 121 62 36 307 230 203 169 144 30 800 1100 55 25°/30°
PHCS010014K18 357 199 158 62 36 347 261 218 185 160 30 850 1150 34 25°/30° PHCS010014K22 359 199 157 62 36 348 300 212 178 153 30 1000 1200 65 25°/30°
PHCS010016K18 415 239 198 62 36 404 283 223 190 165 30 950 1200 39 25°/30° PHCS010016K22 415 239 198 62 36 403 355 228 194 169 30 1200 1300 80 25°/30°
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 146 / 147
The actual production time should be evaluated and the instructions above is for reference only.
Frame Accessory Series
PSK20109 ★★
PSK20113 ★★
◆ Locking plate
PSK104
◆ Locking plate
◆ Match with the u-groove fake mullion profile
2.6
46 6.3
P SK 201 09
U groove Locking plate Serial number 9 Series
3
16.5
door and
13.5
window
◆ Locking plate
◆ Match with the c-groove profile
PSK10613
4
46 6.3
13.5
◆ Locking plate
◆ Match with the c-groove profile
Note: For order quantity less than1000 sets with standard color, the Production Time Symbol ★★< 7days, ★< 10days, none > 15days, 148 / 149
The actual production time should be evaluated and the instructions above is for reference only.
Frame Accessory Series Frame Accessory Series
PSK00709 PSKFD00313
5.5
3.5
7.7
◆ Locking plate ◆ Anti-thief locking plate
★ PSK00713 PSK01709A
47 16.5
4
◆ Locking plate ◆ Locking plate
PSKFD00209 PSK01713A
16.5
4.2
30.5
◆ Anti-thief locking plate ◆ Locking plate
PSKFD00213 PSK01909 ★
8.2
46 5
4
15
4
3
◆ Anti-thief locking plate ◆ Locking plate
PSKFD00309 PSK01913 ★
5 5.5
4
4
13
4.2
7
◆ Anti-thief locking plate ◆ Locking plate
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 150 / 151
The actual production time should be evaluated and the instructions above is for reference only.
Frame Accessory Series Frame Accessory Series
PSK02209 7.5
PQZSKR00213
44.5
PSK02213 PQZSKL00213
25.5
3
17
12
4
8
44.5 7.5
110 13
25.5
7
◆ Tilt lock plate
4
◆ Locking plate 12 ◆ Left & Right (The picture is the right type)
25.5
PSK02313P6
4
2 2 2
8.2
4
8.2
4
8.2
19
3 4.5 6 76 13.5
PSKZBR00109P3 80 PXK00113
PSKZBR00109P4 13.5
27
28.5
4
4
12.8 12.8 12.8
78
◆ Self-locking piece PSKZBR00109P3 PSKZBR00109P4 PSKZBR00109P6.5
◆ Left & Right ◆ Locking plate
◆ Suitable for fire-resistant open-in side-hung windows
PSKZBR00113P3 80 PXK00209
PSKZBR00113P4
27
20.7
9.5
4
4
12.8 12.8 12.8
36.4 12
PSKZBR00113P3 PSKZBR00113P4 PSKZBR00113P6.5
◆ Self-locking piece
◆ Left & Right
◆ ◆ Locking plate
Suitable for fire-resistant open-in side-hung windows
PQZSKR00209 PSK101
PQZSKL00209
4
13
14.5
110 13
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 152 / 153
The actual production time should be evaluated and the instructions above is for reference only.
Frame Accessory Series Frame Accessory Series
PSK002 PZCGR00113
PZCGL00113
38
◆ Supporting cap
◆ Locking plate ◆ Left & Right(The picture is the right type)
22
18
PZCZ00309 9 series
114
22
18
13 series
PZCZ00113 PZCZ004
4
9
4
12
9 series 75 16.5
12
24.8(27.5)
13 series
4
◆ Supporting block
◆ Supporting cap ◆ Suitable for fire-resistant open-in side-hung windows
PZCGR00109 PFWK00109A ★
PZCGL00109 PFWK00113B
4
◆ Supporting cap
◆ ◆ Anti-misoperation block
Left & Right(The picture is the right type)
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 154 / 155
The actual production time should be evaluated and the instructions above is for reference only.
Frame Accessory Series Frame Accessory Series
PKMB002 PFSG001
48
11.7
Shim PKMB002-05
◆ Cover plate
◆
12
Pieces of 9 and 13 is general
◆ Place order as needed for the
cushion, quantity ≤2 nos ◆ Water cap
★★ PTSK001 PKG001
8.8
1
Ø14.3
◆ Lifting block ◆ Hole cap
PTSK002 PCDQXWK001
35
6.5 33
◆ Limiting block
◆
11
Lifting block ◆ Realize transmitter 90° limiting
PTSD001 PKLJK02
35
2.2
16
◆ Frame connector
◆ Suitable for fire-resistant
open-in side-hung windows
◆ Lifting cushion ◆ Applicable height adjustable
PKK001 PSLJK02
24
72
14.8
18
Note: For order quantity less than1000 sets with standard color, the production time symbol ★★< 7days, ★< 10days, none > 15days, 156 / 157
The actual production time should be evaluated and the instructions above is for reference only.
Wooden Window / Composite Window Wooden Window / Composite Window
20-3、WCPN100 Series, Open-in Side-hung System of Solid Wood/Aluminium-clad Wood window ......P166-167
20-6、 LWCPN100 Series, Open-in Side-hung System of Wood-clad Aluminium window ................P172-173
Product Series
158 / 159
20-1 WCPX100 Series Turn-and-Tilt Window Hardware Configuration for WCPX100 Series
Optional Handle
10
02 Handle
PZSNJ002
14
04
01
10 Configuration instruction
03
1. Above configuration is applicable to "9" series PVC profile , besides there is”13" series configuration.
2. Items in green are optional.
3. This configuration is applicable to (including the selective items) sash with height ranged from 901mm to 1200mm and
width ranged from400mm to 1000mm. this system can meet the requirement of the sash groove height 570mm-1800mm
and the width 400mm-1000mm, according to the parameters of each accessory. for details, please refer to the product
series of this catalogue. it is recommended to keep the window ratio (width/height).(W)1:1.5(H)
09
4. The maximum load bearing capacity of this configuration is 150kg,the load bearing capacity depends on
10 the pivot hinge, please refer to pivot hinge series:
06 the sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety
coefficient) ≤the maximum load bearing capacity of the pivot hinge.
5. The above is only for reference. please consult our technical department for sepecific requriement.
14
11 12 10
160 / 161
20-2 WCXP100 Series Tilt-and-Turn Window Hardware Configuration for WCXP100 Series
Optional Handle
10
02 Handle
PZSNJ002
14
04
01
Configuration instruction
03 10
1. Above configuration is applicable to "9" series PVC profile , besides there is”13" series configuration.
2. Items in green are optional.
3. This configuration is applicable to (including the selective items) sash with height ranged from 901mm to 1200mm and
width ranged from400mm to 1000mm. this system can meet the requirement of the sash groove height 570mm-1800mm
and the width 400mm-1000mm, according to the parameters of each accessory. for details, please refer to the product
series of this catalogue. it is recommended to keep the window ratio (width/height).(W)1:1.5(H)
09
4. The maximum load bearing capacity of this configuration is 150kg, the load bearing capacity depends on
the pivot hinge, please refer to pivot hinge series:
10
The sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety
06 coefficient) ≤the maximum load bearing capacity of the pivot hinge.
5. The above is only for reference. please consult our technical department for sepecific requriement.
14
11 12 10
162 / 163
Tilt and Turn & Turn and Tilt Window Hardware System Characteristics
Instruction for Wooden Profile/ Aluminum-wooden profile
38
NLGNXR10906-08 601-800 200
width, the
NLGNXR10908-10 801-1000 200 same X
Effectively reduce Can effectively adjust the air-
◆ The cutting mould refer to page 181 the sash inclining tightness, water- tightness
by adjusting screw and the compaction of the
Drilling depth of upper hinge: 5mm frame and sash
Lock point
Applicable Length of X(Maximum
Adjusting the
43
164 / 165
20-3 WCPN100 Series Open-in Side Hung Window Hardware Configuration for WCPN100 Series
09 Mid pivot hinge NHYZ0029 1 Please indicate the color while placing order
06
Optional Handle
06
03 Handle
PZSNJ002
06 09
Configuration instruction
02
1. Above configuration is applicable to "9" series PVC profile , besides there is "13" series configuration.
2. Items in green are optional.
3. This configuration is applicable to (including the selective items) sash with height ranged from 901mm to 1200mm
and width ranged from 650mm to 1000mm. this system can meet the requirement of the sash groove height 570mm-1800mm
and the width 450mm-1000mm,according to the parameters of each accessory. for details,please refer to the product series
of this catalogue. it is recommended to keep the window ratio (width/height).(W)1:1.5(H)
4. The maximum load bearing capacity of this configuration is 150kg,the load bearing capacity depends on
01 the pivot hinge, please refer to pivot hinge series:
The sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety
coefficient) ≤the maximum load bearing capacity of the pivot hinge.
05
5. The above is only for reference. please consult our technical department for sepecific requriement.
06
03
08
07
06
166 / 167
20-4 LWCPX100 Series Turn-and-Tilt Window Hardware Configuration for LWCPX100 Series
11 09 Upper pivot hinge NPHYSN003 1 Please indicate the color while placing order
Left & Right, divided into9、13series, please indicate the
09 10 Bottom pivot hinge NPHYXNR0109 1 color while placing order
Optional Handle
11
Handle
02 PZSNJ002
15
03
01
04
11 Configuration instruction
1. Above configuration is applicable to "9" series PVC profile , besides there is"13" series configuration.
2. Items in green are optional.
3. This configuration is applicable to (including the selective items) sash with height ranged from 901mm to 1200mm and
width ranged from430mm to 600mm. this system can meet the requirement of the sash groove height 570mm-1800mm
and the width 430mm-1000mm, according to the parameters of each accessory. for details, please refer to the product
10 series of this catalogue. it is recommended to keep the window ratio (width/height).(W)1:1.5(H)
4. The maximum load bearing capacity of this configuration is 150kg,the load bearing capacity depends on
11
the pivot hinge, please refer to pivot hinge series:
06 The sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety
coefficient) ≤the maximum load bearing capacity of the pivot hinge.
5. The above is only for reference. please consult our technical department for sepecific requriement.
15
12 13 11
168 / 169
20-5 LWCXP100 Series Tilt-and-Turn Window Hardware Configuration for LWCXP100 Series
11 09 Upper pivot hinge NPHYSN003 1 Please indicate the color while placing order
Left & Right, divided into9、13series, please indicate the
09 10 Bottom pivot hinge NPHYXNR01013 1 color while placing order
Optional Handle
11 Handle
PZSNJ002
02
15
03 01
Configuration instruction
11
04
1. Above configuration is applicable to "13" series PVC profile , besides there is"9" series configuration.
2. Items in green are optional.
3. This configuration is applicable to (including the selective items) sash with height ranged from 901mm to 1200mm and
width ranged from430mm to 600mm. this system can meet the requirement of the sash groove height 570mm-1800mm
and the width 430mm-1000mm, according to the parameters of each accessory. for details, please refer to the product
10.1
series of this catalogue. it is recommended to keep the window ratio (width/height).(W)1:1.5(H)
10
4. The maximum load bearing capacity of this configuration is 150kg,the load bearing capacity depends on
11 the pivot hinge, please refer to pivot hinge series:
the sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety
06
coefficient) ≤the maximum load bearing capacity of the pivot hinge.
5. The above is only for reference. please consult our technical department for sepecific requriement.
15
12 13 11
170 / 171
20-6 LWCPN100 Series Open-in Side Hung Window Hardware Configuration for LWCPN100 Series
Optional Handle
06 03 Handle
PZSNJ002
06
02 Configuration instruction
1. Above configuration is applicable to "13" series PVC profile , besides there is"9" series configuration.
2. Items in green are optional.
3. This configuration is applicable to (including the selective items) sash with height ranged from 901mm to 1200mm
and width ranged from650mm to 1000mm. this system can meet the requirement of the sash groove height 570mm-1800mm
and the width 450mm-1000mm,according to the parameters of each accessory. for details, please refer to the product series
of this catalogue. It is recommended to keep the window ratio (width/height).(W)1:1.5(H)
01 4. The maximum load bearing capacity of this configuration is 150kg,the load bearing capacity depends on
the pivot hinge, please refer to pivot hinge series:
the sash weight (including the weight of glass, sash profile and other accessories) X1.4 (safety
05 coefficient) ≤the maximum load bearing capacity of the pivot hinge.
5. The above is only for reference. please consult our technical department for sepecific requriement.
06
03
09 08
06
06 07
172 / 173
Pivot Hinge Series Connecting Rod、Limiting Piece Series
NHYSNR0029
NHYSNR00213
NHYZ0029
NHYZ00213
Backset is 15mm
Mute type
Anti-misoperation device PFWQR002
15
27
Transmitter not include Anti-misoperation device,anti-misoperation
device needs to be ordered seperately. ◆ Includes lock strike plate
Quantity of locking
Applicable height Length of rod Series code Remarks Applicable height Length of rod Centre distance Series code Remarks
point
490-730 430 0 NCDQN51505-07 1400-2800 300 55 PMS7255 Suitable for wooden doors
Economical type
1201-1600 1302 1 NCDQN51512-16
Backset is 15mm
Inward Anti-Theft
Type(ND) Type(FD)
PSKFD00118 PFWK00118A
PSKFD00120 PFWK00220A
◆ Anti-misoperation block
★
PSK00118A
PSK00220
◆ Anti-misoperation block
PSK00118A NQZSZ00318
NQZSZ00320
PSK00318
◆
NQZSZ00320
Tilt lock block
NQZSZ00424
◆ Locking plate
PSK00424
◆ Tilt lock block
NQZSZR00318
NQZSZR00320
NQZSZR00318
178 / 179
Frame Accessory Series Solution for High Quality Solid Wood Products
NQZSZR00424
Higher Strength
Increasing the length of the hinge's part which is in the sash, and
add the integral fixing block, to ensure the hardware and the
profile connection is strong, also to make the appearance of the
product more noble.
◆ Tilt Lock block
◆ Left & Right(The picture is the right type)
NKMB00109
Secure Anti-Misoperation
New structure design of anti-misoperation
makes the anti-misoperating
◆ Cover plate
◆ Additional cushion can make it apply to fake mullion doors device is available for both left and right and
◆ Additional cushion shall be ordered separately quick to install, and it can be
effectively used with 9mm-14mm installation
NKBM00113
space to prevent mis-operation.
◆ Lifting block
High load bearing capacity
PFWK004
The load bearing capacity of the hinge can reach 150kg, and L
type hinge seat is added transverse screws for connection. by
bidirectional connection with frame profile, it can improve the
connection strength between hardware and profile and ensure the
performance of the whole window connection.
Note: For order quantity less than1000 sets with standard color, the Production Time Symbol ★★< 7days, ★< 10days, none > 15days, 180 / 181
The actual production time should be evaluated and the instructions above is for reference only.
Wooden Window Duplicator The Cutting Mould
Cutting mould
PCDM001
Turn
90°
Frame Frame
Connecting port
Footboard
use pneumatic control footboatd to
cut the rod.
Rotate to englarge
Turn
1、Movable rod feed port
Frame Frame
90°
Name of the fitting Series Code Remark Name of the fitting Series Code Remark
182 / 183
Completed Projects Completed Projects
184 / 185