Professional Documents
Culture Documents
AGGREGATES PROPERTIES
Specification Limits
S.No Applied Test Property Measured Standard Used
Min Max
1 Sieve Analysis of Coarse Aggregate Percentage passing Each sieve ASTM C136 Refer summary page
2 Sieve Analysis of Fine Aggregate Percentage passing Each sieve ASTM C136 Refer summary page
Fineness Modulus ASTM C136 2.3 3.1
3 Dry Rodded Unit Weight Test Unit weight of Coarse ASTM C 29 - -
Aggregate
4 Specific Gravity of Coarse Aggregate C.A Specific Gravity and water ASTM C 127 - -
Test Absorption
5 Specific Gravity of Fine Aggregate F.A Specific Gravity and Water ASTM C 128 - -
Test Absorption
6 Moisture content of Aggregate by Moisture content of C.A and ASTM C566 - -
drying F.A
7 Sand Equivalent Test Sand Equivalent percentage AASHTO T-176 75% -
8 Los Angeles Abrasion Resistance Percent of Wear AASHTO T-96 - 45%
9 Clay lumps and Friable Particles Percentage of clay lumps AASHTO T-112 - 1%
10 Flat and Elongated Particles in Percentage of Thin and ASTM D4791 - 15%
Coarse Aggregate Test Elongated Particles
11 Soundness of Aggregates Percentage loss of C.A by 12% -
Soundness Test
AASHTO T-104
Percentage loss of F.A by 10% -
Soundness Test
12 Soft Fragments and Shales Test Percentage of Soft fragments AASHTO M-80 5% -
or shales in C.A
13 Organic Impurities in Fine The amount of organic ASTM C 40 Visual inspection
Aggregate Impurities present in F.A with suitable color
plate
14 Chemical Analysis of Coarse Percentage of soluble - 0.1%
Aggregate Chlorides
BS-812: Part 4
Percentage of Soluble - 0.4%
Sulphate
14 Chemical Analysis of Fine Aggregate Percentage of soluble - 0.1%
Chlorides
BS-812: Part 4
Percentage of Soluble - 0.4%
Sulphate
15 Combined Passing Sieve No 200 Percentage of sample passing ASTM C 117 3%
Sieve no 200
LIST OF PROPERTIES MEASURED FOR CONCRETE MIX DESIGN
WATER PROPERTIES
Specification Limits
S.No Applied Test Property Measured Standard Used
Min Max
1 Temperature Test Temperature in °C
2 pH Test pH value
Applicable
Test Parameters Specifications
Test Method
Units
SILICON DI OXIDE SiO2 %
ALUMINIUM OXIDE Al2O3 %
FERRIC OXIDE Fe2O3 %
CALCIUM OXIDE CaO %
MAGNESIUM OXIDE MgO % 6.0 Max
SULPHUR TRI OXIDE SO3 % 2.3 Max
LOSS ON IGNITION LOI % C 114 3.0 Max
INSOLUBLE RESIDUE I.R % C 114 0.75 Max
CHLORIDE Cl %
TRICALCIUM ALUMINATE C3A % 5.00 Max
TETRACALCIUM ALUMINOFERRITE
plus twice TRI CALCIUM CA4AF+2(C3A) %
ALUMINATE 25.0 Max
PHYSICAL PROPERTIES
Minute
INITIAL s C 191 45 min
SETTING TIME Minute
FINAL s C 191 375 max
Water Consist. % C 191
FINENESS-SPECIFIC SURFACE BLAINE cm2/g C 204 2800 Min
AUTOCLAVE % C 151 0.8 Max
AIR CONTENT OF MORTAR % C 185 12 Max
CHEMICAL PROPERTIES
Applicable Test
Test Parameters Units Specifications
Method
PHYSICAL PROPERTIES
INITIAL Minutes C 191 45 min
SETTING TIME FINAL Minutes C 191 375 max
Water Consist. % C 191
FINENESS-SPECIFIC SURFACE BLAINE cm2/g C 204 2800 Min
AUTOCLAVE % C 151 0.8 Max
AIR CONTENT OF MORTAR % C 185 12 Max