Low temperature, b
insulated muffler
Reduces the possiblity
for combustible material
‘to ignite in
compartment.
1 engine
Clean air filtration system
‘The best cab fltration system in the industry
not only cleans the incoming ai but also the
recirculated air inside the cab, making it the
cleanest cab on the market. The filters ate casly
accessible from ground level for lean-ing or
replacing Also the
components with easy to replace breather filters
‘used to prevent dirty air from entering the
‘transmission, axles fuel tank and hydraulic tank
air is vented from all major
cane ERLE EE EEL TD — iveccntocos
II TTIT TT TTAA Rect:
wiitim@am
Torque Parallel Linkage
‘TP-Linkage combines
high breakout torque with,
parallel lift throughout the
tire lifting range, making
it easy to load the bucket
and reduce spillage. Other
design attnbutes include opti
‘mum visibility and excellent
protection of the working
components.Waste handling equipment tailored for
your application
— normal waste applications
Unlike the competition, Volvo lets you choose from a
full range of waste handling equipment that has been
specifically designed for your business. You pick the
protection that is right for you and your application,
The following equipment is recommended in applica-
tions where additional, but not excessive protection is
necessary.
Volvo refuse buckets
Pin-on or hook-on buckets spec
cally designed for waste handling
With high strength steel and a
spilqward designed for maximum
vanbiity these buckets are made to
rove matenal quickly ficiently,
and cafe Different types of wear Airintake protecti
parts are available forall appiea- Designed te lait del
the engine compartment without
sactfcing cooing capacity Three
‘cpanste sercene are used to protect
the areas where aire drawn in, the
top and on each side ofthe engine
Headlight guards hood. (L60E-1120E)
Protect the headlights, worlights,
and tum signals fom debris that
tay break or damage the lenses
(L80E-1.1208)
(L150E-L220E)
Taillight guards
Protect the taillights and turn (L150E-12208)
signals from debris thet may
break or damage the lenses,
(L60E-1220E)Belly guard, front
Completely encloses the compo-
nents located within the front frame
between the center hinge and the
front axl, including the driveshaft,
uuniversl joints, and hydraulic lines.
Tes hinged for easy cleaning and.
‘maintenance. (L60E-L220E)
Belly guard, rear
Designed to protect the compo
nents located within the rear frame
between the center hinge and the
rear axe, including the engine and
‘transmission, Its hinged for easy
cleaning and maintenance.
(608-1208)
Center hinge guards
Rear frame covers together with
center hinge protection plates, keep
the exposed components located
within the rear frame from being
damaged.
(L60E-L1208)
Steer cylinder guards
Provide protection for the items
exposed in the center hinge area,
including the steer cylinders trans
‘mission, and hydraulic and electrical
lines and connections. A transmission,
dipstick replaces the transmission oil
sight guage for easy monitoring of
the transmission oi level
(11508-12208)
Under cab guard
Designed to protect the components
located directly undemeath the cab,
including the steering valve, hydrau-
lie connections and electrical wiring
(505-1208)Waste handling equipment tailored for
your application
— heavy-duty waste applications
When operating in more demanding, heavy-duty Front and rear
applications, like transfer stations, it is recommended mudguard alternatives
to use the following equipment together with those “The front mudguards and rear
recommended for normal waste applications. mudguard wideners can be remo-
ved to prevent interference and/or
damage. (L60E-L120E)
‘Automatically activated
reversible cooling fan
“Timer controlled hydrostatic
cooling fan automatically reverses
the sirlow to remave debris
from the radstor/caoling cores
and ar intake sreens before the
engine overheats
(L60B-.2208)
Front mudguard alternatives
“The front mudguards can be
removed to reduce any possibi
lay of debris interfering with the
‘motion of the wheels and/or tires
(L1sor-L2208)
Heavy-duty front frame
cover plate
Prevents debris from collecting
inside the front frame while also
protecting the main hydraulic
valve and its connections from
possible damage
(L.60E-1.2208)
Radiator grille guard
Intended to protect the grille
cooling fan, radiator, and con-
denser cores from damage when
‘working in severe applications.
Iie hinged to facilitate easy
cleaning and maintenance
(L608-12208)
Battery boxes, stee!
Steel battery boxes replace the
plastic battery box covers in
order to better protect the bat
‘cries from damage,
(L70E-L1208)
Relocated headlight
assemblies.
‘The headlight assemblies have
been moved closer to the fror
frame to reduce the possibility
for damage.
(L608-L1208)
Cab ladders,
rubber suspended
Flexible rubber side members
have been extended to support
two steps of the eab access lad
ders In addltion to being flexible,
they have also been brought
closer to the machine, making it
difficult to damage or destroy the
ladders in extreme conditions
(L1S0E-12208)
(L1S0E-12208)WheeV/axle seal guards
Designed to prevent materia
from wrapping around the axles
ane seals (L60E-L220E)
Boom cylinder
hose and tube guards
‘Designed to protect the boom
jlinder hoses and tubes, these
“box-type" structures prevent
debris from breaking the hove:
and/or tubes when debris
becomes trapped between
the front frame and the boom.
oplinders Stee! spiral hove guards
and a protective plate are used
to cover the hoses connecting
the boom gylinders to the main
valve, (L60E-L2208)
Grease tube guards
Protective guarding is used to cover
exposed grease tubes and zerks
(L70E-12208)
daring operation and damaging the
Belly guard, oil pan
Covers the area located between,
the rear axle and fuel tank,
protecting the engine oil pan and
drain hoses (L150E-L.220F)
Window guards, side and rear
Provide protection for both the
side and rear windows The two
side window guards are hinged for
easy cleaning and maintenance,
while the rear window guard can
easly be removed by means of two
quickdisconnect latches
(L60E-12208)
Windshield guard
Protects both the cab glass and
operator from debris. Iis custom
designed to minimize glacs break
age while maximiz-ing visibility
20)Additional equipment
The following additional options are also recom-
mended in waste handling applications to increase
productivity, efficiency, comfort, versatility, service-
ability, and safety,
Long Boom
Long boom gives the extra dump height and reach necessary
for loading high container trucks or feeders The additional
reach algo gives added protection when loading the bucket
by keeping the machine further away from the material
(1120-12208)
External Axle Oil Cooling
Provides effective cooling of the axle oil and brakes in appli-
cations where heavy loads and constant braking are common.
(L1S0E-1.220F)
Turbine Air Pre-cleaners
Sy-Klone and Tuo Il branded pre-clesnets are avalable for
increased purification of the engine induction ait In addi-
‘on to increased cleaning capacity these air pre-cleaners are
highly recommended in fie sensitive applications as they are
rot connected to the exhaust system.
(L60B-1.2208)
‘Alternator Breather Filter
(Cleans incoming sir forthe altemator In dirty and dusty
conditions it greatly increases both the effectiveness and the
lifetime of the alternator
(608-1208)
Cab Air Filter for Asbestos Environment
Protects the operator in conditions where the airis contami
nated with asbestos or other small, hanmful particles
(Leok-12208)
Easily Accessible Main Battery Disconnect Switch
Additional main battery disconnect switch located inside the
‘ab for quick and easy access in case of a necessary power
shutdown It is possible te lock-out the switch to prevent
the machine from being started or moved,
(L60E-12208)
Rear View Camera with Monitor
Engine hood mounted camera eliminates blind spots when
reversing, Color monitor located inside the cab lets the ope-
ator know what's happening behind him, Especially effective
when working inside in ght quarters
(L60-12208)
Hydraulle Attachment Bracket
With the Iydraulic Attachment Bracket, you can utilize the
whee! loader in different applications where special ma-
chines are otherwise requited, eg forks crane ama, broom,
high-tip bucket
(L60E-12208)
Other Optional Equipment(L.60E-.2208)
Application Specific Tires
‘Air Conditioning with Automatic Temperature Control (ATC)
Boot Suspension System (BSS)
Comfort Drive Control (CDC)
Single Hydraulic Control Lever
Linnited Slip Differentials
Refuse bucket chart
Bucket volme Bucketwisth | Loader compatisity | Loader compatbity
Hookeon Pinson
ye mm
aa 40 2550 84" Looe L60E
41 54 275090 LT0E-L90E LOE-L90E
55 72 2000, 910" | L70E=L120E LIDE-L120
68 39 3200 10%" | — L150E-L2208 L150E-L180E
78 102 sao0 112" | L1508-L220 LISOE-L180E
ag 115 2700 122" | 1506-12206 L206
95 124 3700 172" L206
107 140 3700127 L206
bn es sods,Specifications