Professional Documents
Culture Documents
PART NO.
A001388
CODE NO.
DS,K150
DESCRIPTION
Puller, DS, K150,Black
APPLICATION
For removing C4 series step shank teeth with collars and DS teeth.
29937
2429952
C20HP
Puller, C20HP,Black
2429953
C30HP
Puller, C30HP,Blue
For C30 series (.99 shank) bullet teeth. For removal of most bullet series teeth. Hardened tip provides long life. Used in conjunction with a hammer. For removal of most bullet series teeth. Hardened tip provides long life. Fits all light-duty air-hammer guns with a .395 chuck. For removal of conical tools from blocks. Use with TC10 & TC20 teeth.
A000127
KHP2
A000355
KAHP1
65343293TU
Hammer punch,1/2
65343294TU
Hammer punch,3/4
For removal of conical tools from blocks. Use with TC4, TC30, & TC87 Teeth.
A000752
KRP1
A000137
KRP4
ph: 1.800.447.2781
email: augertools@terex.com
Effective Date: August 2011, Product specifications and prices are subject to change without notice or obligation. The photographs and / or drawings in this document are for illustrative purposes only. Refer to the appropriate Operators Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operators Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Terex makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Terex Corporation and / or its subsidiaries in the USA and other countries. Copyright 2011 Terex Corporation.
A000186
Replaceable tips