Professional Documents
Culture Documents
Ultrasonic Inspection NDT Sample Test Report Format
Ultrasonic Inspection NDT Sample Test Report Format
®
TRINITY NDT
An ISO 9001:2008 Certified Company
Plot No.V-22(A), 6th Main, 2nd Stage, Peenya Industrial Estate, Bangalore-560058, INDIA
This Inspection Report format & other NDT report formats are available for free download at
www.trinityndt.com
Aerospace & General NDT ǀ Training & Certification ǀ Welding Inspection ǀ ASNT NDT Level III Consulting ǀ Sales
TRINITY NDT®
Format No. TNE-UTR-01 Rev ‘0’
This format & other NDT report formats are
available free at www.trinityndt.com
ULTRASONIC Report No :
Request No :
EXAMINATION REPORT Page No. :
Client : Project No. : Location :
Order / Drg. No : Mark / Item no: Material : Th:
Reference Procedure Specification : Surface Condition : Surface Temp
Acceptance Criteria : Heat Treatment : BSR ASR Weld Process :
Equipment & Technique
Model : SL No: Manufacturer :
Couplant type : Wall Paste Cable Type :
Basic Calibration Block : V1(IIW) V2 (IIW) Calibration block :
Search Unit : Manufacture : Technique :
Probe Angle 0 45 60 70 Weld Joint Sketch
SL No
Dimension
Frequency
Sensitivity
Ref gain
Range Scanning Employed From :
Calibration Sheet Attached : Yes No
Item / Order / Welder Tested Evaluation
Joint no Result Remarks
Mark No. Drg No. id length Type Length Depth
Note: CR- Crack IP-Incomplete Penetration IF – Incomplete Fusion SL- Slag P- Porosity EP-Excess Penetration
CP- Cluster Porosity CON – Concavity BSR – Before Stress Relief ASR – After Stress Relief
NDT Inspector Approved by Witnessed by
Name
Signature
Level
Date