Professional Documents
Culture Documents
1F., Block A of Tongsheng Technology Building, Huahui Road, Dalang Street, Longhua District,
Shenzhen, China
Telephone: +86-755-26648640
Fax: +86-755-26648637 Report Template Version: V03
Website: www.cqa-cert.com Report Template Revision Date: Mar.1st, 2017
TEST REPORT
Application No.: CQASZ20200400247E
Applicant: Shenzhen HCY Electrics and Technology Co., Ltd
Address of Applicant: The 1st building , No 2 Gangbei Road, Bogang Village Shajing Town, Baoan,
Shenzhen, China
Manufacturer: Shenzhen HCY Electrics and Technology Co., Ltd
Address of The 1st building , No 2 Gangbei Road, Bogang Village Shajing Town, Baoan,
Manufacturer: Shenzhen, China
Factory: Shenzhen Fugui Precision Industry Co., Ltd.
Address of Factory: 3/F, D10 Building, F8d Area Foxconn Science and Technology Industrial Park,
East side of Min Qing Road, Longhua Street Community Longhua District,
Shenzhen City, Guangdong, 518109, China
Equipment Under Test (EUT):
Product: Air Mouse
Model No.: HCY-57B
Brand Name: N/A
Standards: Item 19 of Article 2 Paragraph 1
Date of Test: 2020-04-13 to 2020-04-16
Date of Issue: 2020-04-17
Test Result : PASS*
Tested By:
(Tom Chen)
Reviewed By:
(Aaron Ma)
Approved By:
( Jack Ai)
* In the configuration tested, the EUT complied with the standards specified above.
The test report is effective only with both signature and specialized stamp, The result(s) shown in this report refer only to the sample(s)
tested. Without written approval of CQA, this report can’t be reproduced except in full.
Shenzhen Huaxia Testing Technology Co., Ltd
1 Version
Revision Record
Version Chapter Date Modifier Remark
00 2020-04-17 Original
Page:2 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
2 Test Summary
Radio Spectrum Matter (RSM) Part
Limit / Severity
Test Test Requirement Result
Uncertainty
Item 19 of Article 2
Frequency Error ±50 PPM or less PASS
Paragraph 1
Item 19 of Article 2 Others: 26MHz or less
Occupied Bandwidth PASS
Paragraph 1 (DSSS: 26MHz or less)
(1) FH, FH+DS , FH+OFDM
3mW/MHz
(used in the range of 2427 -
2470.75 MHz)
(2) OFDM , DS other than (1)
Item 19 of Article 2
Antenna Power 10mW/MHz PASS
Paragraph 1
(3) Other than (1) & (2) 10mW
(4) OFDM OBW 26 - 38MHz:
5mW/MHz
Tolerance
+20%,-80%
(1) Below 2387 MHz : 2.5μW
Item 19 of Article 2 (2) 2387 to 2400 MHz : 25μW
Spurious Emission of Tx PASS
Paragraph 1 (3) 2483.5 through 2496.5 MHz : 25μW
(4) Over 2496.5 MHz : 2.5μW
Interference prevention Item 19 of Article 2
Notice 88 Appendix 43, 44, 45 PASS
capability Paragraph 1
Item 19 of Article 2 (1) Below 1 GHz : 4 nW
Spurious Emission of Rx PASS
Paragraph 1 (2) 1 GHz or higher : 20 nW
Tx: In this whole report Tx (or tx) means the product in transmitting status.
Rx: In this whole report Rx (or rx) means the product in receiving status.
RF: In this whole report RF means Radiated Frequency.
Page:3 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
3 Contents
Page
1 VERSION ....................................................................................................................................................................... 2
3 CONTENTS ................................................................................................................................................................... 4
4 GENERAL INFORMATION......................................................................................................................................... 5
4.1 GENERAL DESCRIPTION OF E.U.T........................................................................................................................ 5
4.2 DETAILS OF E.U.T. ................................................................................................................................................ 5
4.3 DESCRIPTION OF SUPPORT UNITS ........................................................................................................................ 5
4.4 DEVIATION FROM STANDARDS .............................................................................................................................. 5
4.5 ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................. 5
4.6 OTHER INFORMATION REQUESTED BY THE CUSTOMER ....................................................................................... 5
4.7 TEST LOCATION ..................................................................................................................................................... 6
4.8 TEST FACILITY ....................................................................................................................................................... 6
5 EQUIPMENT LIST ....................................................................................................................................................... 7
Page:4 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
4 General Information
4.1 General Description of E.U.T.
Product Name: Air Mouse
Model No: HCY-57B
Trade Mark: N/A
4.2 Details of E.U.T.
Frequency: 2404MHz ~ 2480MHz
Channels: 65 Channels
Page:5 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
Page:6 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
5 Equipment List
MIC Test Equipment List
Humi/ Temp
VICTOR VC330 CQA-TH1 2018/9/26 CTI (c)
Indicator
Rohde &
Spectrum Analyzer FSU CQA-038 2018/10/28 CTI (c)
Schwarz
TBL
certificate
number:
FK1QJUU [T]
iPhone 6s Apple A1688 - -
SGRYD ADF1500
99003
[R]003-
150132
Remark:
(a) Calibration conducted by the National Institute of Information and Communications Technology (NICT) in
Japan (hereinafter referred to as "NICT") or a designated calibration agency under Article 102-18 paragraph
(1) in JRL.
(b) Correction conducted pursuant to the provisions of Article 135 or Article 144 of the Measurement Act (Act
No. 51 of 1992) .
(c) Calibration conducted in countries except Japan, which shall be equivalent to the calibration conducted by
the NICT or a designated calibration agency under Article 102-18 paragraph (1).
(d) Calibration, etc. conducted by using measuring instruments and other equipment listed in the right column
of appended table No. 3, which shall have been given any type of calibration, etc. listed above from (a) to (c).
From JRL Article 24-2,
paragraph 4, Item 2
Page:7 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
Note: The Technical Standards described here do not cover all of the regulated items.
Page:8 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
The antenna is integrated on the main PCB and no consideration of replacement. The best case
gain of the antenna is 3.1dBi.
Operating Environment:
23.2 °C
Temperature:
56 % RH
Humidity:
1009 mbar
Atmospheric Pressure:
Page:9 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
Page:10 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
Page:11 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
(1) Demodulator must be able to demodulate the transmitting signal emitted by test equipment and
(1) When test equipment has the function to transmit identification code automatically:
Page:12 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
EUT Spectrum
Analyzer
Page:13 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
Test results:
Test Result
Test
Frequency Normal High Low Technical
No. Test Items Test ch Voltage Voltage Voltage Unit
Regulations
(MHz)
3.7V DC 4.07V DC 3.33V DC
2404.005 N/A N/A MHz
Lowest 2404.0
2.080 N/A N/A PPM
Note: The nominal frequency shall be confirmed by the applicant and test lab.
The plot please refer below:
Lowest channel(2404MHz):
* RBW 10 kHz Marker 1 [T1 ]
* VBW 10 kHz -13.57 dBm
Ref 10 dBm * Att 20 dB SWT 40 ms 2.404005000 GHz
10
A
0
1 PK
VIEW
-10 1
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Page:14 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
Middle channel(2440MHz):
* RBW 10 kHz Marker 1 [T1 ]
* VBW 10 kHz -14.35 dBm
Ref 10 dBm * Att 20 dB SWT 40 ms 2.440005000 GHz
10
A
0
1 PK
VIEW
-10 1
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Highest channel(2480MHz):
* RBW 10 kHz Marker 1 [T1 ]
* VBW 10 kHz -15.40 dBm
Ref 10 dBm * Att 20 dB SWT 40 ms 2.480005000 GHz
10
A
0
1 PK
VIEW
-10
1
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Page:15 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
EUT Spectrum
Analyzer
EUT conditions: For equipment using diffusion code, set to the test diffusion code and
modulate with standard coding test signal.
Spectrum Analyzer Frequency: Test Frequency
conditions: Span 10MHz(Others)
RBW 300KHz
VBW 300KHz
Sweep Time Auto
detector mode Positive peak
Indication mode Max hold
OBW 99%
Technical standard: FH : 83.5MHz
FH + DS : 83.5MHz
FH + OFDM : 83.5MHz
OFDM, DS : 26MHz
Others : 26MHz
Page:16 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
Test results:
Test Result
Normal Technical
No. Test Items High Voltage Low Voltage Unit
Voltage Regulations
3.7V DC 4.07V DC 3.33V DC
Occupied
26MHz or
1 Bandwidth Middle 1.567 N/A N/A MHz
less
(MHz)
-20
T1 T2
-30
-40
3DB
-50
-60
-70
-80
-90
Page:17 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
Middle channel(2440MHz):
* RBW 300 kHz Marker 1 [T1 ]
* VBW 300 kHz -15.27 dBm
Ref 10 dBm * Att 20 dB SWT 2.5 ms 2.439983333 GHz
-20
T1 T2
-30
-40
3DB
-50
-60
-70
-80
-90
Highest channel(2480MHz):
* RBW 300 kHz Marker 1 [T1 ]
* VBW 300 kHz -15.51 dBm
Ref 10 dBm * Att 20 dB SWT 2.5 ms 2.479983333 GHz
-20
-30 T1 T2
-40
3DB
-50
-60
-70
-80
-90
Page:18 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
EUT Spectrum
Analyzer
EUT conditions: For equipment using diffusion code, set to the test diffusion code and
modulate with standard coding test signal.
Spectrum Analyzer Frequency: Test Frequency
conditions(Others): Span 25MHz
RBW 3MHz (More than the Occupied Bandwidth)
VBW 3MHz (Equal to the RBW)
Sweep Time Auto
Detector mode Positive peak
Indication mode Max hold
Technical standard: Antenna Power
(1) FH, FH+DS , FH+OFDM 3mW/MHz or less (used in the range of 2427 -
2470.75 MHz)
(2) OFDM , DS other than (1) 10mW/MHz or less
(3) Other than (1) & (2) 10mW or less
Tolerance: +20%> Rated Power > -80%
Page:19 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
Test results:
Test Result
Normal Technical
No. Test Items High Voltage Low Voltage Unit
Voltage Regulations
3.7V DC 4.07V DC 3.33V DC
Antenna 0.029 N/A N/A mW
Power Lowest
(mW) 0.000 N/A N/A %
Antenna N/A N/A mW 10mW or less
0.028
1 Power Middle
(mW) -3.448 N/A N/A % Error+20% -80%
Antenna N/A N/A mW
0.027
Power Highest
(mW) -6.897 N/A N/A %
Remark:
Tolerance (%) :[( test value- rate power)/rater power]*100
Rated power: GFSK: 0.029mW/MHz
Page:20 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
10
A
0
1 PK
VIEW
-10
1
-20
-30
-40
3DB
-50
-60
-70
-80
-90
10
A
0
1 RM *
VIEW
-10
1
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Page:21 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
Middle channel(2440MHz):
* RBW 3 MHz Marker 1 [T1 ]
* VBW 3 MHz -15.17 dBm
Ref 10 dBm * Att 20 dB SWT 2.5 ms 2.439541667 GHz
10
A
0
1 PK
VIEW
-10
1
-20
-30
-40
3DB
-50
-60
-70
-80
-90
10
A
0
1 RM *
VIEW
-10
1
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Page:22 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
Highest channel(2480MHz):
* RBW 3 MHz Marker 1 [T1 ]
* VBW 3 MHz -15.50 dBm
Ref 10 dBm * Att 20 dB SWT 2.5 ms 2.479875000 GHz
10
A
0
1 PK
VIEW
-10
1
-20
-30
-40
3DB
-50
-60
-70
-80
-90
10
A
0
1 RM *
VIEW
-10
1
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Page:23 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
EUT Spectrum
Analyzer
EUT conditions: For equipment using diffusion code, set to the test diffusion code and
modulate with standard coding test signal.
Measurement Step1
Procedure: All spurious are measured from 30MHz to 13GHz by peak mode.
Step2
IF the value measured by Step1 is 2dB or less, measure in average mode.
Spectrum Analyzer Frequency: 30MHz – 2400MHz , 2483.5MHz –13GHz
conditions(Step 1): RBW 100kHz (30 – 1GHz) , 1000KHz (over 1GHz)
VBW 100kHz (30 – 1GHz) , 1000KHz (over 1GHz)
Sweep Time Auto
detector mode Positive peak
Indication mode Max hold
Spectrum Analyzer Frequency: Spurious Frequency
conditions(Step 2): Span 0Hz
RBW 1MHz
VBW 1MHz
Sweep Time Auto
Detector mode Sample
Indication mode Max hold
Technical standard: (1) Below 2387 MHz : 2.5μW/MHz
(2) 2387 to 2400 MHz : 25μW/MHz
(3) 2483.5 through 2496.5 MHz : 25μW/MHz
(4) Over 2496.5 MHz : 2.5μW/MHz
Page:24 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
Test Result:
Result plot as follows:
Lowest channel:
Ref 20 dBm
0 A
-10
1
MAXH -20
_SPULIN_
-30
-40
-50
-60
SPUEM 3DB
-70
Middle channel:
Ref 20 dBm
0 A
-10
1
MAXH -20
_SPULIN_
-30
Date: 15.APR.2020
-40
12:33:45
-50
-60
SPUEM 3DB
-70
Page:25 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
Hightest channel:
Ref 20 dBm
0 A
-10
1
MAXH -20
_SPULIN_
-30
-40
-50
-60
SPUEM 3DB
-70
Page:26 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
6.1.10 RF accessibility
Standard requirement
Article 49-20, paragraph 1 (a)
The EUT shall be constructed in such a way that sensitive RF parts, (like modulation and oscillator
parts) cannot be reached easily by the user. These parts shall be covered by soldered metal caps or
glue or by other mechanical covers. If the covers are fixed with screws, these shall be not the
common type(s) like a Phillips, but special versions like Torx, so that the user cannot open the device
with common tools.
Tamper proof Declaration:
1. Sealed with special screws.
2. Plastic chassis is being welded using ultrasonic waves.
3. Chassis is glued using a special adhesive.
4. Metal covers are spot-fused.
5. Cover is specially interlocked.
6. RF and Modulation components are covered with shielding case and this shielding case is
soldered.
7. Shield case is welded at RF and modulation parts, and ID-ROM is welded using the BGA
Method.
8. Shield case is welded at RF and modulation parts, and ID-ROM is glued at its lead with a
special adhesive.
9. Shield case is welded at RF and modulation parts, and ID-ROM is glued with a non-transparent
laminating agent.
10. RF and Modulation parts are mounted on PCB with surface mount technology, and there is no
any adjustable parts on PCB or adjustable parts are not exposed.
Result: Method used to meet "can not open easily requirement" is soldering, the RF IC has 56 pins
and the terminal pitch is below 0.5mm. Any attempt to modify the RF chip will void the normal
operation of this device.
Page:27 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
EUT Spectrum
Analyzer
Test Procedure:
1. Test Conditions:
Spectrum Analyzer is used for measurement.
2. EUT conditions:
Modulation/Spread/Hopping ON
For equipment using diffusion code, set to the test diffusion code and modulate with standard
coding test signal.
3. Spectrum Analyzer conditions:
Step 1
All spurious are measured from 30 MHz to 13 GHz by peak mode.
Step 2
IF the value measured by Step1 is 2 dB or less, measure in average mode.
Test setup for Step 1:
Frequency: 30 MHz – 2400 MHz , 2483.5 MHz –13 GHz
RBW 100 kHz (30 – 1GHz) , 1 MHz (over 1GHz)
VBW 100 kHz (30 – 1GHz) , 1 MHz (over 1GHz)
Sweep Time Auto
detector mode Positive peak
Indication mode Max hold
Test setup for Step 2:
Frequency: Spurious Frequency
Span 0 Hz
RBW 100 kHz (30 – 1GHz) , 1 MHz (over 1GHz)
VBW 100 kHz (30 – 1GHz) , 1 MHz (over 1GHz)
Sweep Time Auto
detector mode Sample
Indication mode Max hold
Page:28 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
Test results:
Result plot as follows:
Lowest channel:
Ref 0 dBm
-20 A
-30
1
MAXH -40
_SPULIN_
-50
-60
-70
-80
SPUEM 3DB
-90
Middle channel:
Ref 0 dBm
-20 A
-30
1
MAXH -40
_SPULIN_
-50
Date: 15.APR.2020 12:34:28
-60
-70
-80
SPUEM 3DB
-90
Page:29 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
Highest channel:
Ref 0 dBm
-20 A
-30
1
MAXH -40
_SPULIN_
-50
-60
-70
-80
SPUEM 3DB
-90
Page:30 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
7 Photographs
7.1 EUT Test Setup
Page:31 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
Page:32 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
Page:33 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
Page:34 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
Page:35 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
Page:36 of 37
Shenzhen Huaxia Testing Technology Co., Ltd
--End of Report--
Page:37 of 37