Professional Documents
Culture Documents
Our Products
Metric Thread Gauge
UN Thread Gauge
ACME Thread Gauge
NPT Thread Gauge
1″-20 UNEF tap supplier-bottom and taper BSPP(G) Thread Gauge
BSPT(R) Thread Gauge
Trapezoidal Thread Gauge
1-20 UNEF 2B / 3B bottom lead thread tap in HSS
NPSM Thread Gauge
▪ Type: UN Tap API Thread Gauge
▪ Size: 25.4 mm UNJ Thread Gauge
▪ Pitch: 1.270 Whitworth Thread Gauge
▪ Material: HSS (High speed steel) Thread Tap Die
▪ Ground thread Sitemap
Add to Cart
1-20 UNEF left hand thread tap also available (RH=right hand LH= left hand), if need right hand thread
tap, no need specially specified, if need left hand tap, it should be specified specially.
1 of 3 14-Dec-22, 1:08 PM
1"-20 UNEF tap-1-20 UNEF thread tap-HSS bottom lead tap | gaugestools https://www.gaugestools.com/1-20-unef-tap-1-20-unef-thread-tap-hss-b...
▪ Usually the 1″-20 UNEF thread taps are bright without special coating, if clients need, we also can
add special coatings, for example: TiN, TiCN, CrN or TiAlN. After coating, the taps’s working life can
be improved greatly.
▪ Usually these taps supplied by individual ( single bottoming tap), we also can send by sets ( Taper
and bottom)
▪ After Quenching treatment, the taps have a good wear – resistance.
▪ Our tap’ cutting effect is good with sharp cutting performance
▪ Good surface finish
Home About Us Testimonials Products Taps Dies Blog Contact Us
▪ outstanding quality, high precision and excellent production reliability.
▪ Our taps can be used in through holes and blind holes.
We can supply straight-flute taps, spiral-flute taps, spiral-point taps and thread forming taps etc.
Straight-flute taps
Straight-flute taps are the most commonly used tools for cutting
internal thread. it is suited to be used in short holes for rough
material and brittle material’s thread holes.
Spiral-flute taps
Spiral-flute taps can effectively control discharge of chip, which
have great advantage in cutting stainless steel etc material which
is hard to machined. often used in blind holes.
Spiral-point taps
Spiral-point taps are interior thread cutting tools which push chips
through holes ahead of the tool. it is suited to tapping high
accuracy thread. often used in through holes.
About us
gaugestools is a professional supplier of thread taps, we can supply rich ranges of thread taps,
including Metric taps, UN taps, ACME taps, BSPP taps, BSPT taps, NPT taps, and Trapezoidal taps
etc.
Worldwide shipment , usually taking 3-4 days clients can receive goods. Our Unified
thread taps are popular in America and Europe etc.
Payment
We accept payment of T/T(bank transfer), Paypal, Credit Cards, and West Union etc.
2 of 3 14-Dec-22, 1:08 PM
1"-20 UNEF tap-1-20 UNEF thread tap-HSS bottom lead tap | gaugestools https://www.gaugestools.com/1-20-unef-tap-1-20-unef-thread-tap-hss-b...
51La
3 of 3 14-Dec-22, 1:08 PM