Fluke Corporation
Everett, Washington 98206
USA
Certificate of Calibration
The Fluke Corporation, NQA ISO 9001:2015 ISO Certification No 10100, certifies that the
instrument identified herein was calibrated in accordance with applicable Fluke calibration
procedures. Their calibrations processes are ISO-9001 controlled and are designed to verify
the instrument was within its published specifications at the time of calibration.
This calibration is traceable to the SI through recognized national measurement institutes,
ratiometric techniques, consensus standards, or natural physical constants. The calibration
has been completed in accordance with the Fluke Quality System document QSD 111.0. This
certificate applies to only the item identified and shall not be reproduced other than in full,
without the specific written approval by Fluke Corporation, The user is obliged to have the
object recalibrated at appropriate intervals.
In the attached measurement results, measurement error may be expressed with units,
(measurement error equals measured result subtracted from the reference value] or as a
Proportion of the measurement error to the reference value expressed as percent,
Quality Assurance Manager
Fluke Corporation
For customer uso only
Please fill in appropriate dates as indicated:
Date Instrument Received:
Date Calibration Due:
in 46000 Rev 7208
Fluke Corporation TBiephone Facsimile nal
PO BaxO090 Everett WA C8206 D0D0USA 425.347.8100 ‘284488116 i wr BakesProduction Verification Test Data
Model: 1663 SN: 5479153 Date: 08/10/2021
Function Applied Stimulus
Response Low Limit High Limit Units
VAC 0.4 V @ 60 Hz 0.4
VAC 230 V @ 50 Hz 229.5
VAC 495 V @ 50 Hz 493.8
RLO 20 Ohm range at 19.65 Ohm 19.67
RLO 200 Ohm range at 196.5 Ohm 196.4
RLO 2000 Ohm range at 1965 Ohm 1962
RLO Test current 250 mA at 2 Ohm 0.25
RISO Test voltage 500 V 520
RISO Insulation resistance 0.50 MOhm 0.50
RISO Insulation resistance 225 MOhm 225
RISO Test current 1 mA at 500 kOhm (nominal) 0.00102
RISO _Test voltage 1000 V 1037
RISO Insulation resistance 0.1 MOhm Ou
RISO. Insulation resistance 1.0 MOhm 10
RISO Insulation resistance 195.0 MOhm 194.9
RISO _Insulation resistance 900 MOhm 897
RISO. Test current 1 mA at 1 MOhm (nominal) 0.00102.
Zi Line-Neutral 0.50 Ohm at 230 V /50 Hz 0.50
Zi Line-Neutral 18.00 Ohm at 230 V /50 Hz 18.05
a Line-Neutral 180.0 Ohm at 110 V /60 Hz 179.4
Zz Line-PE 1800 Ohm at 240.V/50Hz 1840
RCD delta Tripping speed test at 30 mA 296.2
RCD deltaT Tripping speed current at 30 mA 0.032
RCD deltaT Tripping speed test at 1000 mA 297.2
RCD delta Tripping speed current at 1000 mA 1.077
RCD Idelta 10 mA RCD trip current at 750 ms PASS
RE Compliance voltage 25 V 2
RE Frequency 128
RE 200 Ohm range at 0.5 Ohm 08
RE 2000 Ohm range at 1800 Ohm 1801
Phase Seq. Correct sequence "1-2-3" PASS
Phase Seq. Incorrect sequence "3-2-1" PASS
Ol
227.9
490.8
19.33
193.3
1933
0.20
500
0.47
202.5
0.00100
1000
0.0
07
191.8
810
0.00100
0.45
17.60
176.4
1692
291.1
0.030
291.1
1.000
20
124
0.0
1727
0.7
232.1
499.2
19.97
199.7
1997
0.30
550
0.53
247.5
0.00110
1100
04
13
198.2
990
0.00110
0.55
18.40
183.6
1908
298.9
0.033
298.9
1.100
30
132
10
1873
(vy)
v)
(vy)
(Ohm)
(Ohm)
(Ohm)
(a)
wy)
(MOhm)
(MOhm)
(A)
(vy)
(MOhm)
(MOhm)
(MOhm)
(MOhm)
(a)
(Ohm)
(Ohm)
(Ohm)
(Ohm)
(ms)
(A)
(ms)
(A)
W)
(Hz)
(Ohm)
(Ohm)