Professional Documents
Culture Documents
Locked state
This panel cannot be selected
unless certain conditions are met.
2 3
Start the game Basic ways to play
1 If you are new to the game, click This game software aims to "make aircraft passage safe and smooth as
[Tutorial]. If you want to start the game, an air traffic controller would." Give quick and accurate directions so as
click the [Game Stage] panel. not to interfere with scheduled operations and so avoid the possibility
of collisions between aircraft.
Select an aircraft and click the Direction buttons, and the aircraft will
be operated as directed. At the end of the assigned time, the Stage is
cleared if the clearing conditions of each Stage are achieved.
2 The Stage screen is displayed. click the
[Stage] panel. A locked Stage cannot be General flow of air traffic control
selected without playing and clearing
its preceding Stage.
Basic rules
If you give appropriate directions to the aircraft in your charged section,
the score will be incremented. At the end of the assigned time of each
Stage, if the clearing conditions such as the Efficiency Index and the
Risk Index have been achieved, the Stage is cleared. However, the game
will be over in the following situations.
4 5
Screen configuration Introduction of each function(1)
Rating gauge
Time, Efficiency, Risk, and Score are displayed.
Strip
Strip
Radar window The strip (operation ticket) of the
Airport information such as aircraft selected aircraft is displayed. You can If the selected aircraft is in the "Charge Section", you can give directions.
position, speed, and wind direction is give directions to the aircraft. Arriving aircraft are colored orange, departing aircraft are green, and inter-
displayed. spot aircraft are blue. Semi-transparent applies to "Auto Section" and the
directions are given automatically.
*The Auto section is a section that is not handled by the player and so the player
cannot give directions to the aircraft.
*Click the flight number to cancel the selection and switch from the strip to the Mini Strip.
Mini strip
6 7
Introduction of each function(2) Introduction of each function(3)
Time Stage assigned time and progress rate to the end. Green letters
indicate the Stage end time.
Efficiency Indicates the status of the cumulative scheduled operation of the
Radar window
Index aircraft. The Efficiency Index decreases when a delay occurs for
the assigned aircraft, and the Efficiency Index increases when
the delay is eliminated. The Efficiency Index is expressed with Aircraft in the airspace are displayed on the radar. On the ground radar
gauges, with white circles indicating the current efficiency, with screen, high-speed taxiways and unusable runways are color-coded.
the a rea near yellow, an approximate guide to what is required *You can also select an aircraft by clicking its flight number on the radar screen.
to clear the Stage.
*Yellow position depends on the Stage Move position Hide
Risk Index Rises when a dangerous condition (as in the following
situations) occurs due to air traffic control. The game is over Wind direction / Sky / Ground
when the Risk Index reaches the upper limit. Wind speed toggle button
- Abnormal approach between aircraft
- When handoff is performed automatically Your runway may be Zoom bar
- Go around using pilot judgment unusable
- Takeoff in a tailwind *In the insert cut,
- Simultaneous use of crossing runways details such as
Score Points will be added for specific instructions to the aircraft. In changes in runway
Scheduled runway
addition, bonus points will be added under certain conditions. operation are shown.
Scheduled spot
*If the display is in a
- Charge Section and Auto Section red circle, the aircraft
is parked at the spot.
Each Stage has "Charge Section" where directions can be issued to the aircraft
and "Auto Section" where directions are automatically given and the player is not
responsible for them. Direct the aircraft in your section to get more flights on time within Aircraft speed in flight
the guidance time specified for each aircraft on the Strip. *The number of arrows Unusable runway
*In the Stage where multiple sections are assigned, the guide time to the section that changes depending
received the most recent direction is displayed on the strip. on the flight speed.
Change size
8 9
Introduction of each function(4) Introduction of each function(5)
Moderate breeze
Displays notifications, cautions, and warnings according to the progress
* The wind is blowing in the direction of the triangle. of the game.
Notification
ATC Window
Caution
The communication contents of the auto section are color-coded in gray.
*In the initial state of the game, the ATC window is not displayed. The display is Warning
selected by the icon on the app bar.
Move position Hide
App Bar
Scroll bar
Game end button Fixed camera point toggle
The game is over. button
Moves to the fixed camera
Screen mode switch button point set in advance.
Toggles between "Window" and *The fixed camera point
Change size "Pop-up" of the game screen can be confirmed in the
display. airport guide.
10 11
Introduction of each function(6) / Result Replay
Result
When the assigned time for each Stage ends, the "Result" screen is Replay allows you to restart the game from anywhere within its timeline.
displayed.The Stage is evaluated in five Stages of "S> A> B> C> D",
and if a clear condition has been achieved, the Stage is cleared.
[Resume] button
12 13
Original Stage (1) Original Stage (2)
From "Schedule / Autumn 2017", you can play by selecting the time zone
you want to play, the runway operation, and the section in charge. Deleting Original Stage
*To play on the original schedule of “Schedule / Autumn 2017”, Stage 1 must
be cleared. Select the Original Stage you want to delete from the Delete screen and
*[Delete] is not displayed if the original Stage has not been created. click [OK].
[Delete]
14 15
Configuration
In the Configuration, you can make settings for titles and game menus,
and settings for each airport (sound, 3D model, etc.).
*To set the settings for each airport, you need to open Configuration after
selecting the airport in the game menu.
Revert to Default
Set the settings for each airport to
Switches to each setting screen. the state at the time of purchase.
Custom Settings
You can change the settings of
each item of the 3D model in
more detail.
Custom Settings screen
16 17