Pi Bet hy) Ty)
Turbidity and Suspended Solids Monitor
The Turbsense range of Tursiciy/Suspended Solis analyzers i made up of an ISO 7027 compliant Tubidty/Suspended Sols
Meter covering the range of 0.01-1000 NTU (0.01-2000me/I depencing on the sample).
+ Extremely low total cost of ownership
+ Single point calibration (patented) - no ‘zero’ required
+ Autoclean solid state optical sensor - no moving parts q
+ Suitable for all potable, waste and most process waters
+ Upto 1 year between call
ration
"In a constant sample, the drift is
+ From 0.01-1000 NTU (0.01-2000 mg/I, application dependent)
+ Stable and reliable - excellent process control “co.0! NTU per month, Amazing!”
+ Automatic debubbling Dr. Jeff Prest, UK.
The TurbSense sensors are avallable with diferent controllers giving you the same great performance with diferent
communication, splay, and contol options, With the TurdSense range of turbidity meters, you get great stability, reiabity
and ease of use coupled with great resolution and limits of detection
CRONOS® TurbSense CRIUS® TurbSense Flow Cell Mounting
rs TurbSense range of
Hurbity/Suspended Soles anelyzers
Jan be mounted in aw cel, also
avaliable from P
5
|
high Quainy Lonase cast + Highest Quality ~ Low Cost
+ Mutitingua
+ Muttingual
+ High resolution grayscale display “High resolution color dspay
+ 9 buttons for easy navigation "Intuitive user interace
+ Graphing and datalogging + Downloadable oats logs
+ Enclosure; wal, panel pipe oF pole + Customizable home pages
mounting. 1P65/Nema 4, + AIL CRONOS® options plus
9. 16S 4 Pl Jacvantages include:
* opt ons 7 Upto 4 sensors J+ Made from black polypropylene
= Modbus RS485/LAN 7 Remote acenss via LAN astle~ eliminating stray light
lproftbus ov 2 Remote access via 36/ac_ | | eer ig
prema ra TExpandable to 16 sensors | [+ Covered - eliminates ambient int
{PtD/tow propetonal consis | [== are information please | |" Batetrevove bubs
= Remote sone see the individual brochures _ | |* Automatic nucleating bubbles
Downloadable data logs for CRONOS® and CRIUS®
STA ern a acai rdPrinciple of Operation
TurbSense determines true tur
andjor suspended solids
In water, using & nephe'ometric measurement of scattered
ligat in accorcance with ISO 7027. The TurbSense sensor
Uses ifeime-based optical technology to provide an
extremely stale, accurate, low maintenance sensor, with no
‘moving parts and no consumables.
Each probe is equipped with a light source, a side
for the measurement of scattered light fram the somple one
2 reference detector for menitoring the light output. The light
source fs 2 long-life IR LED emitter. This configuration allows
suspended solids to be made. Reliable callbration can be
carried out using a single ealibration with no need for 8 ‘ero
The method of determining the correct reading and the
calibration is subject to a patent application. See the related
“The probes are constructed of stiniess steel end sapphire so
can withstand demanding operating envronments. An
Autoclean system can De inclded to keep the optical
surfaces clean, thereby reducing maintenance to 2 potenti
Mounting
‘The TurbSense can be mounted on the end of 2 pole for aip|
‘mounting in @ channel or tank, oF a debuboing Now cel.
Bubbles
‘As with ol turbiaty instruments, bubbles can interfere. Phas
developed several methods of removing bubbles including
Using the autociean function and a cebubsting fow cll
Specification"
Range: Selectobe within 0.01
Typical Ranges: 0.01-20 NTU, 0.01-100 NTU, 0.01
Linearity: Poss
Response Times:
Repeatability
15839)
Resolution:
Limit Of Detection:
Temperatur om s0°c
Pressure: 0-10 bar
Averaging: 3205 - 10min
Lamp Source:
Cleaning Cycles:
Cleaning:
Enclosure ratin
‘Sensor Environmental Protection:
FRLED, 8600
68
Display:
Calibration:
Diamete 38mm (1.5 inch)
Length: 278mm (11 inch)
STA ern at acai
Whatever the source of bubbles, the TurbSense can come
‘equipped to handle them
Calibration
Calibration of the TuroSense really couldnt be easier! Ett
take 2 reacing of the water with anather method and enter
jour black polyethylene calibration pot filed with 0.51 of
standaré (typically 20 NTU). The enalyser calibrates the
sensor by @ pracecure that reduces the light output through
four stages, taking measurements at each. This process
provides 2 very accurate and reliable zero and span without
the requirement to use a0! NTU sample.
Note: If your water le <1 NTU, it i= not suitable tor
calloraton, use a standard instead
Cleaning
‘To keep the sensor clean, the Turbsense is fited with
CGeaning nozzles. These can be used to clean the optical
Windows with 2 jet of water This cleaning procedure can be
automated to cary out the ceaning at predefined intervals
‘Sensor Overview
0.82
on900
nine
nu
a
1000 NTU, 0.01-2000 may (application dependent)
000 NTU
TP 10s (adjustable based on averaging)
<< 196 of measured valve or 0.01 NTU (whichever is greater)
<< 0.3% of measured value or 0.005 NTU (whichever isthe greater) (Ref: ISO
8.003 NTU (0-2), 0.01 NTU (2-10), 0.1 NTU (10-100), 1 NTU (>100)
0.01 NTU (0-10 NTU, Ref: 150 15835)
User settable cleaning cycle time and cleaning time
‘utociean waterjet
Value and Alarms and Graphs at the same ime
One point (zero not required)
‘All subject to change without notice
Li
nT)