FLOWSERVE
SS
Hot water pumps
for up to 150°C
(302 °F)
ZLN ~ The standard hot water pump
Up toa temperature of 140 °C (284 *F) and when properly
‘laced, the ZLN a standard water pump as pe EN 723
an be used with uncooled, balanoed mechanical sels.
Product ceuation ensure thatthe mechanical seals
permanently surrounded bythe medium, tus preventing
ry running,
ZDI~ The hot water inline pump
‘The economical nine design is bacoming increasingly
popular in hot water applications, because it can be installed
inline in ay pipaine system and thus compensates for
Pipoineforas in an ideal manner. The ZD! uses a stub shaft
‘onection, which permits use of a standard motor fr a
compact design
‘The maximum pumping temperature for the uncooled ZD1
hot wate design is limited to 150 °C (302 °F), The process
esign makes it possible to disassemble te complete
ump without having to separate the pump casing fom the
Pipaine system,
Technical data
Fou ta | 1800 rh 7026 US go) | 140 (616 US gpm)
Dae head 140 (59) famcern)
Temperate | 140°C 4") uncooled | 150%C (802) unenokd
Cason pressure PLIE Pas
Maer Doce eon Duele ron
aN
z01Howserve.com
Cg
for up to 230°C
(446 °F)
Handling hot water requves very special pump designs
a the operating pressure increases exponentially with
the tomperatureincreese. Special developments ofthe
seal housing are integrated to achieve exceptional long
[MTBF times by quaranteeing the optimal seal faces
lubrication under al circumstances.
‘Many pump and mechanical seal manutactures offering
standard pumps with uncooled mechanical seals up to
180°C (856°), Praxis however has proven thatthe
‘poor lubrication characteristics of water under these
extreme pressure and temperature conditions lead to
short MTBF times of the equipment.
The combination of uncooted sealing device and the
special pump construction make this pump design
unique in its kind. I isnot only offering the saving of
the use of cooling water, but also incrsase the MTBF
time to a normal expscted ie time of a mechanical
ZHN, ZON, ZEN The hot water pumps
Inthe volte casing pumps ZHNL, ZDN, and ZEN, the
‘mectanicl sea has been rove to the drive sie or
“ald end” of the pump. In tis way, a double heat
bare resutsn a more favourable temperature
decrease on the drive ste, Even at a temperature
of up to 290°C (446 °F, the use of an uncooled
‘mechanical seals no prota because the temperature
In this area does nat exceed 100°C (212°),
This eliminates te ned fr eaolng water andthe
instalation costs for external cooing of the shat sel.
In hat water applications, however, tis not enough
Just to placa the seal onthe “cold end”, because this
‘madium ends to vapors during heating.
Due to centitugal forces, gas bubbles are deposited
‘on te smallest rotating pats. in goneal, his means
the siding surfaces ofthe mechanical sel. The
‘bumps counter these physical conditions by using @
425 Separator in tho ara of he mecnarical seal. AL
the highest pont, theresa colectng chamber forthe
sea, resulting gases. Ths space can be vented by means
ofa vabe both wien the system fat a standstill and
‘whan starting up of he plant.
Technical data
Fomata [60D meh 2642 US gpm) 600 mh (2642 US gpr)_| 600 mh (2642 US opm)
Deer ead 0 m 295), 30m 295) 90m 5A)
Tomperae | 160°C (356°) wooed | 20770 (404 Fp uncooked | 290°C (46 Furnes
Ging presure P68 ies Pao
wate Duet kon Ducteiron Doce von, cast tee