Professional Documents
Culture Documents
HuckBolt® C50L®
Lockbolt System > 10 mm
HuckBolt® C50L® Lockbolt System > 10 mm / Contents
2 Titgemeyer/10048EN1220/1
HuckBolt® C50L® Lockbolt System > 10 mm / Contents
Contents
Page
Titgemeyer/10048EN1220/1 3
HuckBolt® C50L® Lockbolt System > 10 mm / Overview
HuckBolt® C50L®
The lockbolt system for heavy-duty applications.
Lockbolts are ideal for permanently HUCKBolt C50L is a pin and collar The HUCKBolt C50L system is used
and securely fastening two parts system comprising grade 8.8 material for applications involving very high
together so that they will never with a diameter of 12.7 mm. The pin input forces and torque (heavy-duty
detach even when subjected to tail breakoff is designed to marry applications). Even when subjec-
preload or dynamic load. perfectly with the specially adapted ted to vibrations, the applied clamp
collars. Collars are available with or force remains constant. As a positive
without flange, as required. locking device that fastens perman-
ently with the bolt, the collar is
impossible to remove.
Subject to change
4 Titgemeyer/10048EN1220/1
HuckBolt® C50L® Lockbolt System > 10 mm / Overview
— Very high tensile and shear strength 1. Select lockbolts based on the
— Very high clamp force specified requirements as well as 1.
— Safe-build-up of clamp force the clamping thicknesses available
— Constant clamp force / preload on-site (sum total of all wall thick-
— Vibration resistant nesses to be installed)
— No heat exposure around the joint 2. Select the installation tool incl.
— No warping pulling head that matches the lock-
— No refinishing required around bolts to be installed (for details,
the joint see “Overview - High-strength
— No surface damage on components Lockbolts” in the „Tools for Lock-
— Visual inspection bolts“ catalogue)
— Installation can be checked using 3. Insert the bolt into both through- 2.
process monitoring holes on the components and, with
— Maintenance-free the chamfer aligned to the end of
— Quick and easy installation the bolt, slide the collar over the
lockbolt. (Fig. 1)
4. Fully press the installation tool
with attached pulling head against
the collar while securing the pin in
place from the opposite side to
prevent it from being poked out.
(Fig. 2)
3.
5. Press the trigger on the installa-
tion tool. The jaws then grip into
the grooves on the pin tail and tug
at the pin. The pulling head sleeve
presses up against the components
and the resulting clamp force
pushes them together. (Fig. 3)
6. As the tool continues to pull, the
pulling head sleeve slides over
the collar. (Fig. 4) This reduces the
4.
external diameter of the collar.
The compressed material slides
into the locking grooves of the bolt
1 2 3 5 6 to form the desired positive fit. As
the front side of the sleeve elonga-
tes, it is pushed up against the
component to create the desired
4
preload where the parts connect.
7. The tool will continue to pull until
Composition the lockbolt’s preload is achieved,
causing the tip of the bolt (pulling 5.
6 = Collar
Titgemeyer/10048EN1220/1 5
HuckBolt® C50L® Lockbolt System > 10 mm / Brazier
Brazier
k L1 max.
L min. grip len.
Material
d2
Steel (Type 8.8) EN 10263-3
bare, black Collars
d1
Standard Flanged
6 Titgemeyer/10048EN1220/1
HuckBolt® C50L® Lockbolt System > 10 mm / Brazier
Cont‘d
101.5–108.5 95.5 – 102.5 101.5 230.5 25.1 – 26.0 46.5 15.5 251300 323400 229100 377 715 000
For technical specifications, see table of collars. Please order collars separately!
Titgemeyer/10048EN1220/1 7
HuckBolt® C50L® Lockbolt System > 10 mm / Countersunk 90°
Countersunk 90°
L1 max.
90°-92°
Steel (Type 8.8) EN 10263-3
d2
bare, black Collars
k
d1
Standard Flanged
8 Titgemeyer/10048EN1220/1
HuckBolt® C50L® Lockbolt System > 10 mm / Countersunk 90°
Cont‘d
Titgemeyer/10048EN1220/1 9
HuckBolt® C50L® Lockbolt System > 10 mm / Collars for C50L® lockbolts
Standard collar
C 13°-17°
Material
A
B
EN 10263-2
Please note:
Standard collar =
see tables for grip range
Flanged collar =
smaller grip range
Subject to change
10 Titgemeyer/10048EN1220/1
HuckBolt® C50L® Lockbolt System > 10 mm / Collars for C50L® lockbolts
Flanged collar
C
Material F
13°-17°
G
B
A
EN 10263-2
Please note:
Standard collar =
see tables for grip range
Subject to change
Titgemeyer/10048EN1220/1 11
About us
Titgemeyer Group is a leading fastening technology and transport
technology group of companies with 15 sites across Europe. Steeped
in tradition, the company develops, manufactures and sells more than
30,000 fastening elements, tools and vehicle components – in series
and to customer specification.
Titgemeyer GmbH & Co. KG Gebr. Titgemeyer GmbH Titgemeyer Turkey Baglanti Baker & Finnemore Limited
Hannoversche Straße 97 Brunner Straße 77 – 79 Teknolojileri San. ve Tic. A.S. 199 Newhall Street
49084 Osnabrück / DE 1230 Wien / AT Barbaros Mah. Is Merkezi No.1 Birmingham, B3 1SN / UK
Kat: 8 D.58
POB 4320 T +43 (0) 1/6 67 90 40 – 0 34746 Atasehir, Istanbul / TR T +44 121 23 62 – 347
49033 Osnabrück / DE E sales@titgemeyer.com E info@bakfin.com
W titgemeyer.at T +90 (0) 21 66 88 20 – 27 W bakfin.com
T +49 541 5822–0 E sales@titgemeyer.com.tr
E info@titgemeyer.com W titgemeyer.com.tr
W titgemeyer.com Titgemeyer CZ spol. s r. o. Titgemeyer GmbH & Co. KG
U Vodárny 1506 Werk Lotte
397 01 Pisek / CZ Titgemeyer (UK) Limited Daimlerstraße 13 – 15
A2 Link One Industrial Park 49504 Lotte / DE
T +420 382 2067 – 25 George Henry Road
E sales@titgemeyer.com DY4 7BU Ti pton / UK T +49 5404 9666 – 0
W titgemeyercz.cz E info@titgemeyer.com
T +44 (0) 1 21 5 57 97 – 77 W titgemeyer.com
E sales@titgemeyer.co.uk
Titgemeyer Polska sp. z o.o. W titgemeyer.co.uk
Cypriana Bazylika 17 RIEKO GmbH
98-200 Sieradz / PL Robert-Bosch-Straße 9
72124 Pliezhausen / DE
T +48 (0) 43 828 20 – 15
E sales@titgemeyer.com T +49 7127 9744 – 0
W titgemeyer.pl E info@rieko-web.com
W rieko-web.com