Professional Documents
Culture Documents
group Wrench
HTL’s innovative Low Profile Hydraulic Torque Wrench is part of the 3-in-1 range. This Hydraulic Torque Wrench can be used for
a wide range of applications, but is especially suited for applications where clearance is limited.
Extremely durable, this premium tool is made from the highest quality materials and is amongst the most innovative torque tooling
designed to date. This ensures that with the use of the HTL Low Profile, the operator can not only utilise other attachments in
the 3-in-1 range, but also interchange these with many other well-known brands.
Due to its innovative design and the high quality materials used, this tool is extremely durable and easy to operate. Hex sizes
are available from 3/4” to 6 1/8” AF (24mm to 155mm AF) and the tool can output torque ranges from 149 to 29,267 lbf.ft (202
to 39,681 Nm).
The tool, which is designed and manufactured in the UK, comes with a 12 month warranty and full CE and ATEX approval.
Operator Safety
To improve operator safety HTL have also designed an ergonomic, adjustable torque wrench handle which can be easily fitted
to HTL’s Low Profile Hydraulic Torque Wrench. This lightweight, durable accessory can prevent injuries such as trapped fingers
by eliminating the need to hold the tool itself.
The HTL Low Profile Hydraulic Torque Wrench is also supplied with a link pin retainer as standard.
12
N THE
MADE I
MONTH
Complete tool shown is HTL-W Torque Wrench with HTL-L Low Profile Attachment
= +
HTL-L Kg 2.0 4.0 - 5.0 8.0 - 9.0 11.0 - 13.0 29.0 - 33.0
B Inch
3
/4” - 2 /4”
3 7
/8” - 3 /8”
1
1 /4” - 4 /8”
3 1
2” - 4 /8”
5
3 9/16” - 6 1/8”
mm 9 12 15 18.5 22
mm 31.5 42 52.6 64 85
mm 45 60 80 90 131
A E
1 24 3
/4”- 1 /16”
3
52.0 2.1 25.4 1.0 30.0 1.2
4 41 1 /2” - 1 /16”
1 11
52.0 2.1 33.0 1.3 14.0 0.6
5 - 1 /4” - 1 /16”
3 13
52.0 2.1 35.0 1.4 14.0 0.6
135.0 5.3 2.0 3.0
6 50 1 7/8” - 2” 61.0 2.4 38.6 1.5 14.0 0.6
8 60 2 /8” - 2 /16”
3 7
61.0 2.4 43.5 1.7 14.0 0.6
9 - 2 /2” - 2 /16”
1 9
65.0 2.6 47.3 1.9 14.0 0.6
1 36 7
/8” - 1 7/16” 77.0 3.0 33.0 1.3 48.0 1.9
2 41 1 /2” - 1 /1”6
1 11
77.0 3.0 36.0 1.4 46.0 1.8
3 46 1 /4” - 1 /16”
3 13
77.0 3.0 38.5 1.5 40.0 1.6
4 50 1 7/8” - 2 1/16” 77.0 3.0 41.4 1.6 36.0 1.4 4.0 5.8
7 65 2 /2” - 2 /16”
1 9
72.0 2.9 49.8 2.0 16.0 0.6
HTL-L4 10 80 3” - 3 /8”1
77.0 3.0 58.5 2.3 16.0 0.6
1 50 1 /4” - 2”
3
90.0 3.5 44.4 1.8 52.0 2.1
4 65 2 /16”
9
81.0 3.2 52.5 2.1 22.0 0.9 8.0 11.2
5 70 2 /8” - 2 /8”
5 7
81.0 3.2 55.5 2.2 20.0 0.8
8 85 2 /4” - 3 /8”
1 3
87.0 3.4 64.0 2.5 17.0 0.7
9 90 3 /2”1
90.0 3.5 67.0 2.6 17.0 0.7
10 - 3 9/16” - 3 3/4” 96.0 3.8 70.5 2.8 17.0 0.7 9.0 12.2
1 55 - 70 2” - 2 /8” 7
120.6 4.8 58.0 2.3 75.0 3.0
4 85 3 /4” - 3 /8”
1 3
125.5 4.9 65.5 2.6 70.0 2.8
5 90 3 /2”
1
125.5 4.9 70.0 2.8 60.0 2.4
276.0 10.9
6 - 3 9/16” - 3 3/4” 111.6 4.3 74.0 2.9 34.0 1.3
7 100 3 7/8” 120.6 4.8 75.0 3.0 44.0 1.7 12.0 17.1
8 105 4 /8”
1
125.5 4.9 79.0 3.1 44.0 1.7
9 110 4 /4”
1
111.6 4.4 81.5 3.2 24.0 1.0
13.0 18.1
HTL-L14 10 115 - 120 4 1/2” - 5 5/8” 120.6 4.8 87.5 3.5 24.0 1.0
4 115 - 120 4 5/8” 150.0 5.9 94.0 3.7 55.0 2.2 30.0 41.4
365.0 14.4
5 125 - 130 5” 146.0 6.4 99.0 3.9 36.0 1.4 31.0 42.4
6 135 5 /8”
3
146.0 6.4 104.0 4.1 36.0 1.4 32.0 43.4
7 140 -145 - 150.0 5.9 109.0 4.3 36.0 1.4 32.0 43.4
HTL-L30 8 150 -155 5 15/16” - 6 1/8” 156.0 6.1 115.0 4.5 36.0 1.4 33.0 44.4
A/F
D
Reaction Area C
B
A
PLEASE NOTE: Figures provided are for guidance only, please refer to individual tool charts. All data is given in good faith and without acceptance of responsibility on the part of HTL.
Cramlington, Northumberland,
NE23 1WD
1.2/SH/06.02.2020