Professional Documents
Culture Documents
Catáloo LCS3
Catáloo LCS3
3 dimensions of
excellence
INCREASED SPEED, HIGH DENSITY, MIXED
SOLUTIONS, MODULARITY, OPTIMISED ENERGY,
TIME SAVINGS, SIMPLIFIED MAINTENANCE:
USERS HAVE MUCH TO GAIN FROM LCS 3!
PERFORMANCE
When describing the performance of a structured
cabling system, irrespective of the technology Transmission speed from
used for the conductor (copper or fibre optic), the 25 Gb/s to 40 Gb/s with High performance levels Speed connection with
transmission speed (Bit rate) is the reference point. the new toolless RJ 45 with the LCS3 Cat. 8 copper 12 fibres or 24 fibres thanks
connectors solutions to the MTP connectors
› See p.727 › See p.728 › See p.745
SCALABILITY
Legrand has developed customised solutions
providing an infrastructure that is scalable at all
levels. These solutions make future upgrades Copper patch panels are Copper system new HD modular panels offer
possible and facilitate all maintenance operations. easy to mix with Legrand sliding cassettes make the possibility to add
fibre optic solutions maintenance easier splicing cassette with good
› See p.726 to 740 › See p.727 to 741 coiling space
› See p.749
EFFICIENCY
Legrand cabling solutions have been completely
renovated and redesigned to increase the number of
connectors and simplify installation. Modular panels: Easy to hand and easy
High density copper patch possibility to change to use, the smart splicer
panels contain 48 ports modular blocks, blank makes fibre optic cable
per unit panels, MTP(1) adaptors… connection easier than ever!
› See p.729 to 740 › See p.748 › See p.748
710 711
Connectivity and housing selection tables
configure your system
LCS3 LCS2
LCS3 with new generation Quick-Fix with Quick-Fix
AND LCS2 PANELS AND CONNECTOR BLOCKS
Cat. 8 Cat. 6A Cat. 6 Cat. 6A Cat. 6
STP 0 337 82(2) 0 337 72(2) 0 337 62(2) 0 335 73(1) 0 335 63(1)
1 U patch panels
UTP - 0 337 70(2) 0 337 60(2) - -
equipped with 24 connectors
FTP - - 0 337 61(2) - 0 335 62(1)
712
Connectivity and housing selection tables
configure your system (continued)
UTP 0 335 54
6 RJ 45
FTP 0 335 55
FTP 0 335 39
Ethernet/Ethernet
Splitter blocks UTP 0 335 38
FTP 0 335 37
Telephone/Ethernet
UTP 0 335 36
Telephone/telephone 0 335 35
7 RJ 45 ports 0 335 02
Switch blocks
6 RJ 45 ports + 1 LC type fibre optic port 0 335 05
713
Connectivity and housing selection tables
configure your system (continued)
Fibre optic blocks LC duplex block for 12 fibre optics 0 321 14 0 321 24
SC high density duplex block
0 321 15 0 321 25
for 24 fibre optics
LC APC duplex block for 12 fibre
0 321 16 -
optics
ST block for 6 fibre optics 0 321 17 0 321 27
714
Connectivity and housing selection tables
configure your system (continued)
715
Connectivity and housing selection tables
configure your system (continued)
716
Connectivity and housing selection tables
configure your system (continued)
1U 0 321 50
Fibre optic drawers with front and
2U 0 321 52
back facing cord management
4U 0 321 53
Multimode 0 321 56
MTP(1) (MPO compatible) adaptors
Singlemode 0 321 57
LCS3 HIGH DENSITY CASSETTES FOR VERY HIGH DENSITY MODULAR FIBRE OPTIC DRAWERS
LCS3 EQUIPMENT
Multimode 0 321 56
MTP(1) (MPO compatible) adaptor
Singlemode 0 321 57
24 LC 0 321 42
OM4 multimode MTP(1) cassettes (50/125 μm)
12 LC 0 321 43
24 LC 0 321 44
OS2 single-mode MTP(1) cassettes (9/125 μm)
12 LC 0 321 45
717
Connectivity and housing selection tables
configure your system (continued)
LCS3
RJ 45 PATCH AND USER CORDS
Cat. 8 Cat. 6A Cat. 6
0.5 m 0 337 01 - -
1m 0 337 02 - -
2m 0 337 03 - -
3m 0 337 04 - -
5m 0 337 05 - -
8m 0 337 06 - -
10 m 0 337 07 - -
0 337 21 - -
0.5 m
0 337 08 - -
0 337 22 - -
1m
LSZH S/FTP Impedance 100 Ω 0 337 09 - -
0 337 23 - -
2m
0 337 10 - -
0 337 24 - -
3m
0 337 11 - -
0 337 25 - -
5m
0 337 12 - -
0 337 26 - -
8m
0 337 13 - -
0 337 27 - -
10 m
0 337 17 - -
- 0 518 70 -
1m
- 0 518 66 -
- 0 518 71 -
2m
- 0 518 67 -
S/FTP Impedance 100 Ω
- 0 518 72 -
3m
- 0 518 68 -
- 0 518 73 -
5m
- 0 518 69 -
- - 0 518 54
1m
- - 0 518 50
- - 0 518 55
2m
- - 0 518 51
LSOH F/UTP Impedance 100 Ω
- - 0 518 56
3m
- - 0 518 52
- - 0 518 57
5m
- - 0 518 53
- - 0 518 62
1m
- - 0 518 58
- - 0 518 63
2m
- - 0 518 59
U/UTP Impedance 100 Ω
- - 0 518 64
3m
- - 0 518 60
- - 0 518 65
5m
- - 0 518 61
718
Connectivity and housing selection tables
configure your system (continued)
719
Connectivity and housing selection table
configure your system (continued)
Cat. 6A Cat. 6
STP 0 786 28 -
Copper feedthrough
FTP - 0 786 23
Ethernet/Ethernet FTP 0 765 39 0 765 39
Splitter
Telephone/Ethernet FTP 0 765 37 0 765 37
sockets
Telephone/telephone 0 765 35 0 765 35
720
Connectivity and housing selection table
configure your system (continued)
8m 0 517 86 - -
RJ 45/stripped 15 m 0 517 87 - -
20 m 0 517 88 - -
S/FTP unscreened cords Impedance 100 Ω
8m 0 515 23 - -
RJ 45/RJ 45 15 m 0 515 24 - -
20 m 0 515 25 - -
8m - 0 517 57 -
RJ 45/stripped AWG 24 15 m - 0 517 58 -
20 m - 0 517 59 -
8m - - 0 517 90
U/UTP unscreened cords Impedance 100 Ω RJ 45/stripped 15 m - - 0 517 91
20 m - - 0 517 92
8m - 0 515 10 0 515 00
RJ 45/RJ 45 15 m - 0 515 11 0 515 01
20 m - 0 515 12 0 515 02
8m - 0 517 96 -
RJ 45/stripped AWG 24 15 m - 0 517 97 -
20 m - 0 517 98 -
F/UTP unscreened cords Impedance 100 Ω
8m - 0 515 13 0 515 03
RJ 45/RJ 45 15 m - 0 515 14 0 515 04
20 m - 0 515 15 0 515 05
8m - - 0 517 93
F/UTP screened cords Impedance 100 Ω RJ 45/stripped 15 m - - 0 517 94
20 m - - 0 517 95
721
Connectivity and housing selection table
configure your system (continued)
10 m 0 517 20
15 m 0 517 36
5m 0 517 30
HD 15 male / male cords
10 m 0 517 23
15 m 0 517 31
722
Connectivity and housing selection table
configure your system (continued)
USB Data cords USB A male / Lightning male cord 1m 0 398 62(1)
2m 0 398 74
5m 0 398 75
10 m 0 398 76
Cat. 6 U/UTP
15 m 0 398 77
20 m 0 398 78
30 m 0 398 79
723
Connectivity and housing selection tables
configure your system (continued)
LCS3 19" SERVER ENCLOSURES (WITHOUT SIDE PANELS) - WITH AIRFLOW MANAGEMENT (p. 758)
42 U Width 600 mm 4 460 12 4 460 13 4 460 14
LCS3 19" SERVER ENCLOSURES - FLAT PACK (WITH SIDE PANELS) (p. 758)
42 U Width 600 mm 4 460 30 4 460 31 4 460 32
724
Connectivity and housing selection tables
configure your system (continued)
Connection on 6 mm2
LCS3 1 U 19" SINGLE PHASE PDU - POWER DISTRIBUTION UNITS (p. 771) terminal block
3 m cord on 16 A plug
6 outlets German Standard - 6 468 06
9 outlets German Standard - 6 468 12
8 outlets British Standard - 6 468 13
6 outlets French Standard - 6 468 05
9 outlets French Standard - 6 468 10
9 outlets-red French Standard - 6 468 11
10 outlets C13 - IEC 60320 6 468 14 -
12 outlets C13 - IEC 60320 - 6 468 15
8 outlets C13 (6) and C19 (2) - IEC 60320 6 468 09 -
6 outlets C13 - IEC 60320 6 468 07 -
Connection
on 6 mm2 1 m cord on With With Surge
LCS3 1 U 10" SINGLE PHASE PDU - POWER DISTRIBUTION UNITS (p. 771) terminal 16 A plug Ammeter protection
block
4 outlets German Standard - 6 468 01 - -
4 outlets French Standard - 6 468 00 - -
3
LCS 1 U 19" SINGLE PHASE PDU - WITH POWER/LUMINOUS INDICATORS (p. 771) Power Indicator Luminous Switch
725
Legrand cabling system LCS3 cat. 8 Legrand cabling system LCS3 cat. 8
flat equipped patch panel flat patch panels to be equipped
0 337 82 0 337 90
Pack Cat.Nos Cat. 8 patch panel equipped with Pack Cat.Nos Flat 24-connector patch panels -
24 RJ 45 connectors 1 U to be equipped
Complete with new generation Quick-Fix for Complete with new generation Quick-Fix for
automatic mounting (no screws required) on the automatic mounting (no screws required) on the
risers of cabinets or enclosures risers of cabinets or enclosures
Universal mounting on any cabinet or enclosure Universal mounting on any cabinet or enclosure.
Ensures automatic earthing of each connector Ensure automatic earthing of each connector
Equipped with rear cable guide to hold the cables Equipped with rear cable guide to hold the cables
during maintenance during maintenance
Equipped with 4 cassettes of 6 cat. 8 RJ 45 LCS3 Flat panel with empty cassettes to be equipped
quick-connect connectors (no tools required), with with connectors
568 A/B marking
Supplied with coloured labels Equipped with 4 automatic extraction cassettes for
Compliant with ISO/IEC 11801 edition 3.0 (2017) cat. 5e to cat. 8 RJ 45 connectors
and EIA/TIA 568 C2-1 standards 1 0 337 90 19" patch panel - 1 U
19" patch panel - 1 U Empty flat panel to be equipped with cassette
Automatic cassette removal by simple pressure Accepts a maximum of 4 automatic extraction
Possibility of individual extraction of each connector cassettes:
Flat panel - copper
1 0 337 82 STP panel - Metal shielding - fibre optic
1 0 337 91 19" patch panel - 1 U
726
Legrand cabling system LCS3 cat. 8 Legrand cabling system LCS3 cat. 8
angled patch panel to be equipped with connectors equipment and accessories
0 337 92
0 337 56 0 337 59 0 337 55
Pack Cat.Nos Angled 24-connector patch panel - 1 U Pack Cat.Nos Common accessories for flat and angled
panels
Complete with new generation Quick-Fix for
automatic mounting (no screws required) on the Port blanking modules
risers of cabinets or enclosures 10 0 337 56 Divisible 6 port blanking plate
Universal mounting on any cabinet or enclosure for sealing from 1 to 6 ports
Ensures automatic earthing of each connector Cord management
Equipped with rear cable guide to hold the cables 1 0 337 59 2 cord management for use with new generation
during maintenance Quick-Fix
Angled panel to be equipped with connectors Provide side cord management
Accepts up to 24 cat. 5e to cat. 8 RJ 45 connectors
1 0 337 92 19" panel - 1 U Specific accessories for flat panels
Cassette for flat panels to be equipped
Cat. 8 RJ 45 connectors for flat and 1 0 337 55 Empty removable cassette to be equipped with
angled STP panel connectors. Accepts 6 cat. 5e to cat. 8 connectors
Quick-connect connection (no tools required), with Extraction by simple pressure of the cassette
568 A/B marking making installation and maintenance easier
Supplied with coloured labels Blanking cassette
Compliant with the following standards ISO/IEC 1 0 337 57 To be used for blanking the panel
11801 edition 3.0 (2017) and EIA/TIA 568 C2-1
1 0 337 85 Set of 6 RJ 45 connectors Specific accessories for angled panels
For installation in the cassettes of flat or angled Angled panel cover
panels 1 0 337 58 For optimised management of the air flow inside the
cabinet
727
Legrand cabling system LCS3 cat. 8 Legrand cabling system LCS3 cat. 6A
cables and cords flat equipped patch panels
Automatic cassette
extraction
0 337 88 0 337 03
0 518 90 0 337 72
Pack Cat.Nos Cat. 8 local network cables Pack Cat.Nos Cat. 6A patch panels equipped with
24 RJ 45 connectors
4 twisted pair cables, 100 Ω
LSOH sheath: without halogens Complete with new generation Quick-Fix for
EIA/TIA colour code automatic mounting (no screws required) on the
Compliant with ISO/IEC 11801 edition 3.0 risers of cabinets or enclosures
(2017) and EIA/TIA 568 C2-1 standards Universal mounting on any cabinet or enclosure
Ensure automatic earthing of each connector
F/UTP - 4 pairs Equipped with rear cable guide to hold the cables
Performance 2000 MHz during maintenance
5001 0 337 86 Length 500 m supplied on drum Equipped with 4 cassettes of 6 cat. 6 A RJ 45 LCS3
Weight 42 kg quick-connect connectors (no tools required), with
568 A/B marking
S/FTP - 4 pairs Supplied with coloured labels
Performance 2000 MHz Compliant with ISO/IEC 11801 edition 3.0 (2017) and
5001 0 337 88 Length 500 m supplied on drum EIA/TIA 568 C2-1 standards
Weight 45 kg 19" panel - 1 U
Automatic cassette removal by simple pressure
Cat. 8 RJ 45 patch cords
Flat panels
RJ 45/RJ 45 flat 24 RJ 45 connectors - 1 U
LSZH With special "easy grip" plug 1 0 337 70 UTP
Compliant with ISO/IEC 11801 edition 3.0 1 0 337 72 STP
(2017) and EIA/TIA 568 C2-1 standards
RAL 6027 S/FTP shielded, impedance 100 Ω
0 337 01 Length 0.5 m
0 337 02 Length 1 m
0 337 03 Length 2 m
0 337 04 Length 3 m
0 337 05 Length 5 m
0 337 06 Length 8 m
0 337 07 Length 10 m
LSZH
728
Legrand cabling system LCS3 cat. 6A Legrand cabling system LCS3 cat. 6A
flat patch panels to be equipped angled patch panels to be equipped with connectors
0 337 92
0 337 90
0 337 94
0 337 93 0 337 75
Pack Cat.Nos Flat 24-connector patch panels - Pack Cat.Nos Angled 24-connector patch panel - 1 U
1 U to be equipped
Complete with new generation Quick-Fix for
Complete with new generation Quick-Fix for automatic mounting (no screws required) on the
automatic mounting (no screws required) on the risers of cabinets or enclosures
risers of cabinets or enclosures Universal mounting on any cabinet or enclosure
Universal mounting on any cabinet or enclosure Ensures automatic earthing of each connector
Ensure automatic earthing of each connector Equipped with rear cable guide to hold the cables
Equipped with rear cable guide to hold the cables during maintenance
during maintenance
Angled panel to be equipped with connectors
Flat panel with empty cassettes to be equipped Accepts up to 24 cat. 5e to cat. 8 RJ 45 connectors
with connectors 1 0 337 92 19" panel - 1 U
Equipped with 4 automatic extraction cassettes for
cat. 5e to cat. 8 RJ 45 connectors Angled high density 48-connector patch
1 0 337 90 19" panel - 1 U panel - 1 U to be equipped
Empty flat panel to be equipped with cassettes Complete with new generation Quick-Fix for
Accepts a maximum of 4 automatic extraction automatic mounting (no screws required) on the
cassettes: risers of cabinets or enclosures
- copper Universal mounting on any cabinet or enclosure
- fibre optic Ensures automatic earthing of each connector
1 0 337 91 19" panel - 1 U Equipped with rear cable guide to hold the cables
during maintenance
Flat high density 48-connector patch panel -
Angled panel to be equipped with connectors
1 U to be equipped
Accepts up to 48 cat. 5e to cat. 6A RJ 45 connectors
Universal mounting on any cabinet or enclosure 1 0 337 94 19" panel - 1 U
Ensures automatic earthing of each connector
Equipped with rear cable guide to hold the cables High density cat. 6A RJ 45 connectors
during maintenance
Automatic cassette removal by simple pressure Cat. 6A RJ 45 connectors for flat and angled STP
Possibility of removing each connector individually panels
1
Quick-connect connection (no tools required), with
0 337 93 19" panel - 1 U 568 A/B marking
Supplied with coloured labels
Compliant with ISO/IEC 11801 edition 3.0 (2017) and
EIA/TIA 568 C2-1 standards
For equipment to be installed in the cassettes of flat
or angled panels
Set of 6 cat. 6A RJ 45 connectors
1 0 337 73 UTP
1 0 337 75 STP
729
Legrand cabling system LCS3 cat. 6A
equipment and accessories
Pack Cat.Nos Common accessories for flat and Pack Cat.Nos Specific accessories for angled panels
angled panels
Angled panel cover
Port blanking modules 1 0 337 58 For optimised management of the air flow inside the
10 0 337 56 Divisible 6 port blanking plate cabinet
For sealing from 1 to 6 ports
Cord management
1 0 337 59 For use with new generation Quick-Fix
Provides side cord management
Specific accessories for flat panels
Cassette for flat panels to be equipped
1 0 337 55 Empty removable cassette to be equipped with
connectors. Accepts 6 cat. 5e to cat. 8 connectors
Extraction by simple pressure of the cassette,
making installation and maintenance easier
Possibility of removing each connector individually
High density cassette for flat panels to be
equipped
1 0 337 95 Empty removable cassette to be equipped with
connectors
Accepts 12 cat. 5e to cat. 6 A connectors
Extraction by simple pressure of the cassette,
making installation and maintenance easier
Blanking cassette
1 0 337 57 To be used for blanking the panel
730
Legrand cabling system LCS3 category 6A and category 7
cables and cords
New plug
Convenient for gripping
0 327 77 0 517 82
Pack Cat.Nos Cables for local networks cat. 6A Pack Cat.Nos RJ 45 patch cords and user cords cat. 6A
Cables 4 pairs or 2 x 4 twisted pairs 100 ohms RJ 45 - RJ 45 right
LSZH sleeve: halogen-free Conform to standards ISO/IEC 11801
PVC
Yellow RAL 1018 Ed. 2.0, EN 50173-1 and TIA/EIA 568C
Colour code TIA/EIA
Conform to standards ISO/IEC 11801 U/UTP unscreened impedance 100 Ω
LSZH 1 0 518 82 Length 1 m
Ed. 2.0, EN 50173-1 and TIA/EIA 568C 1 0 518 83 Length 2 m
U/UTP - 4 pairs 1 0 518 84 Length 3 m
500 1 0 327 87 Performance 500 MHz 1 0 518 85 Length 5 m
Length 500 m LSZH
Supplied on reel. Weight 25 kg
F/UTP - 4 pairs
500 1 0 327 78 Performance 500 MHz 1 0 518 78 Length 1 m
Length 500 m 1 0 518 79 Length 2 m
Supplied on reel. Weight 25 kg 1 0 518 80 Length 3 m
1 0 518 81 Length 5 m
F/UTP - 2 x 4 pairs
500 1 0 328 78 Performance 500 MHz
Length 500 m 1 0 518 74 Length 1 m
Supplied on reel. Weight 65 kg 1 0 518 75 Length 2 m
1 0 518 76 Length 3 m
F/FTP - 4 pairs 1
500 1
0 518 77 Length 5 m
0 328 83 Performance 500 MHz PVC
Length 500 m S/FTP shielded impedance 100 Ω
Supplied on reel. Weight 25 kg
1 0 518 16 Length 0.5 m
U/FTP - 4 pairs 5
500 1 0 328 84 Performance 500 MHz 0 517 80 Length 1 m
5 0 517 81 Length 2 m
Length 500 m 5
Supplied on reel. Weight 25 kg 0 517 82 Length 3 m
5 0 517 83 Length 5 m
U/FTP - 2 x 4 pairs LSZH
500 1 0 328 85 Performance 500 MHz
Length 500 m
Supplied on reel. Weight 65 kg 1 0 518 70 Length 1 m
1 0 518 71 Length 2 m
Cables for local networks cat. 7 1 0 518 72 Length 3 m
Cables 4 pairs or 2 x 4 twisted pairs 100 ohms 1 0 518 73 Length 5 m
LSZH sleeve: halogen-free
Yellow RAL 1018
Colour code TIA/EIA 1 0 518 66 Length 1 m
Conform to standards ISO/IEC 11801 1 0 518 67 Length 2 m
Ed. 2.0, EN 50173-1 1 0 518 68 Length 3 m
1 0 518 69 Length 5 m
S/STP - 4 pairs
500 1 0 327 77 Performance 600 MHz Euroclass Dca
Length 500 m
Supplied on reel. Weight 30 kg
S/FTP - 2 x 4 pairs
500 1 0 327 79 Performance 600 MHz
Length 500 m
Supplied on reel. Weight 58 kg
S/FTP - 4 pairs
500 1 0 328 82 Performance 600 MHz Euroclass B2ca
Length 500 m
Supplied on reel. Weight 58 kg
1: in metre(s)
731
Legrand cabling system LCS3 category 6A
RJ 45 sockets - MosaicTM Programme
10 0 765 08 White
UTP - 1 module
10 0 765 71 White
10 0 794 71 Aluminium
10 0 765 26 White with green shutter
10 0 765 27 White with orange shutter
UTP - 2 modules
10 0 765 74 White
10 0 794 74 Aluminium
10 0 765 09 White
732
Legrand cabling system LCS3 category 6A TRAINING
RJ 45 sockets - Arteor
Level UP
5 723 06 5 723 50 5 728 49
UTP - 1 module
10 5 723 49 White
10 5 728 49 Magnesium
10 5 723 59 White with green shutter
10 5 728 59 Magnesium with green shutter
10 5 723 58 White with orange shutter
10 5 728 58 Magnesium with orange shutter
UTP with controlled access - 2 modules
Supplied with 2 keys for 5 sockets
5 5 723 57 White with red shutter
5 5 728 57 Magnesium with red shutter
A VARIED OFFER
Available in several different formats (exercises,
videos, quizzes, etc), Legrand distance training
courses are very varied in content: the basics of
electricity, standards and regulations, innovative new
products, protection, power compensation, home
automation, VDI, UPS, etc.
733
Legrand cabling system LCS3 cat. 6 Legrand cabling system LCS3 cat. 6
flat equipped patch panels flat patch panels to be equipped
Automatic cassette
extraction
0 337 90
0 337 61 0 337 93
Pack Cat.Nos Cat. 6 patch panels equipped with Pack Cat.Nos Flat 24-connector patch panels -
24 RJ 45 connectors 1 U to be equipped
Complete with new generation Quick-Fix for Complete with new generation Quick-Fix for
automatic mounting (no screws required) on the automatic mounting (no screws required) on the
risers of cabinets or enclosures risers of cabinets or enclosures
Universal mounting on any cabinet or enclosure Universal mounting on any cabinet or enclosure.
Ensure automatic earthing of each connector Ensure automatic earthing of each connector
Equipped with rear cable guide to hold the cables Equipped with rear cable guide to hold the cables
during maintenance during maintenance
Equipped with 4 cassettes of 6 cat. 6 RJ 45 LCS3 Flat panel with empty cassettes to be equipped
quick-connect connectors (no tools required), with with connectors
568 A/B marking
Supplied with numbered coloured labels Equipped with 4 automatic extraction cassettes for
Compliant with ISO/IEC 11801 edition 3.0 (2017) and cat. 5e to cat. 8 RJ 45 connectors
EIA/TIA 568 C2-1 standards 1 0 337 90 19” panel - 1 U
19" panel - 1 U Empty flat panel to be equipped with cassettes
Automatic cassette removal by simple pressure Accepts a maximum of 4 automatic extraction
Flat panels cassettes
24 RJ 45 connectors - 1 U - copper
1 - fibre optic
0 337 60 UTP 1 0 337 91 19" patch panel - 1 U
1 0 337 61 FTP
1 0 337 62 STP Flat high density 48-connector patch panel
- 1 U to be equipped
Universal mounting on any cabinet or enclosure
Ensures automatic earthing of each connector
Equipped with rear cable guide to hold the cables
during maintenance
Automatic cassette removal by simple pressure
Possibility of removing each connector individually
1 0 337 93 19" panel - 1 U
734
Legrand cabling system LCS3 cat. 6 Legrand cabling system LCS3 cat. 6
angled patch panels to be equipped with connectors equipment and accessories
0 337 92
0 337 56 0 337 59 0 337 55
Pack Cat.Nos Angled 24-connector patch panels - 1 U Pack Cat.Nos Common accessories for flat and
angled panels
Complete with new generation Quick-Fix for
automatic mounting (no screws required) on the Port blanking modules
risers of cabinets or enclosures 10 0 337 56 Divisible 6 port blanking plate
Universal mounting on any cabinet or enclosure For sealing from 1 to 6 ports
Ensures automatic earthing of each connector Cord management
Equipped with rear cable guide to hold the cables 1 0 337 59 For use with new generation Quick-Fix
during maintenance Provides side cord management
Angled panel to be equipped with connectors
Accepts up to 24 cat. 5e to cat. 8 RJ 45 connectors Specific accessories for flat panels
1 0 337 92 19" panel - 1 U Cassette for flat panels to be equipped
1 0 337 55 Empty removable cassette to be equipped with
Angled high density 48-connector connectors. Accepts 6 cat. 5e to cat. 8 connectors
patch panel - 1 U to be equipped Extraction by simple pressure of the cassette,
Complete with new generation Quick-Fix for making installation and maintenance easier
automatic mounting (no screws required) on the High density cassette for flat panels to be
risers of cabinets or enclosures equipped
Universal mounting on any cabinet or enclosure 1 0 337 95 Empty removable cassette to be equipped with
Ensures automatic earthing of each connector connectors
Equipped with rear cable guide to hold the cables Accepts 12 cat. 5e to cat. 6 A connectors
during maintenance Extraction by simple pressure of the cassette,
Angled panel to be equipped with connectors making installation and maintenance easier
Accepts up to 48 cat. 5e to cat. 6 A RJ 45 connectors Possibility of removing each connector individually
1 0 337 94 19" panel - 1 U Blanking cassette
1 0 337 57 To be used for blanking the panel
Cat. 6 high density RJ 45 connectors
Specific accessories for angled panels
Cat. 6 RJ 45 connectors for flat and angled panels
Quick-connect connection (no tools required), with Angled panel cover
568 A/B marking 1 0 337 58 For optimised management of the air flow inside the
Supplied with coloured labels cabinet
Compliant with ISO/IEC 11801 edition 3.0 (2017) and
EIA/TIA 568 C2-1 standards
For equipment to be installed in the cassettes of flat
or angled panels
Set of 6 cat. 6 RJ 45 connectors
1 0 337 63 UTP
1 0 337 64 FTP
1 0 337 65 STP
735
Legrand cabling system LCS3 category 6
cables and cords
New plug
Convenient for gripping
0 327 54 0 517 62
Pack Cat.Nos Cables for local networks cat. 6 Pack Cat.Nos RJ 45 patch cords and user cords
cat. 6
Cables 4 pairs or 2 x 4 twisted pairs PVC
100 ohms RJ 45 - RJ 45 right
Blue RAL 5015
Colour code TIA/EIA U/UTP unscreened impedance 100 Ω
Plastic bag
Conform to standards ISO/IEC 11801 1 0 518 18 Length 0.5 m
Ed. 2.0, EN 50173-1 and TIA/EIA 568C 1 0 517 72 Length 1 m
1 0 517 73 Length 2 m
LSZH PVC U/UTP - 4 pairs
305 1 1 0 517 74 Length 3 m
0 327 54 Length 305 m
Supplied in cardboard box. Weight 16 kg 1 0 517 75 Length 5 m
500 1 0 328 61 Length 500 m 1 0 515 11 Length 15 m
Supplied on reel. Weight 18 kg 1 0 515 12 Length 20 m
305 1
0 327 55 Length 305m LSZH
Supplied in cardboard box. Weight 13 kg
F/UTP - 4 pairs 1 0 518 62 0 518 58 Length 1 m
305 1 0 328 56 Length 305 m 1 0 518 63 0 518 59 Length 2 m
Supplied on reel. Weight 17 kg 1 0 518 64 0 518 60 Length 3 m
500 1 0 327 56 Length 500 m 1 0 518 65 0 518 61 Length 5 m
Supplied on reel. Weight 25 kg PVC
F/UTP screened impedance 100 Ω
F/UTP - 4 pairs
305 1 0 328 57 Length 305 m
Supplied in cardboard box. Weight 17 kg 1 0 518 15 Length 0.5 m
500 1 0 327 58 Length 500 m 1 0 517 62 Length 1 m
Supplied on reel. Weight 25 kg 1 0 517 63 Length 2 m
1 0 517 64 Length 3 m
F/UTP - 2 x 4 pairs 1 0 517 65 Length 5 m
500 1 0 327 76 Length 500 m
LSZH
Supplied on reel. Weight 48 kg
SF/UTP - 4 pairs
500 1 0 327 57 Length 500 m 1 0 518 54 0 518 50 Length 1 m
Supplied on reel. Weight 29 kg 1 0 518 55 0 518 51 Length 2 m
500 1 0 327 59 Length 500 m 1 0 518 56 0 518 52 Length 3 m
Supplied on reel. Weight 30 kg 1 0 518 57 0 518 53 Length 5 m
1: in meter(s) PVC
SF/UTP shielded impedance 100 Ω
5 0 517 52 Length 1 m
5 0 517 53 Length 2 m
5 0 517 54 Length 3 m
5 0 517 55 Length 5 m
736
Legrand cabling system LCS3 category 6
RJ 45 sockets - MosaicTM Programme
737
Legrand cabling system LCS3 category 6
RJ 45 sockets - Arteor, Soliroc and Plexo
738
Legrand cabling system LCS3 Legrand cabling system LCS3 cat. 5e
feedthrough sockets - MosaicTM Programme and Arteor flat equipped patch panels
Certified as conforming to standards ISO 11801 ed. 3.0, EN 50173-1 and Pack Cat.Nos Cat. 5e patch panels equipped with
EIA/TIA 568 24 RJ 45 connectors
Contacts marked with 568 A and B dual colour code and numbers
Connectors with self-stripping terminals Complete with new generation Quick-Fix for
Possibility of re-wiring in the event of error automatic mounting (no screws required) on the
Multidirectionnal cable entry risers of cabinets or enclosures
For use with area distribution boxes (see opposite), connection to boxes Universal mounting on any cabinet or enclosure
via RJ 45-RJ 45 dedicated cords Ensure automatic earthing of each connector
Used to create cat. 6A, cat. 6 and cat. 5e links in accordance with Equipped with rear cable guide to hold the cables
standards during maintenance
2 modules Equipped with 4 cassettes of 6 cat. 5e RJ 45 LCS3
quick-connect connectors (no tools required), with
Pack Cat.Nos Sockets with copper feedthrough cat. 6A 568 A/B marking
Supplied with coloured labels
Cat. 6A STP - Mosaic Programme Compliant with ISO/IEC 11801 edition 3.0 (2017) and
10 0 786 28 White EIA/TIA 568 C2-1 standards
10 0 786 29 Aluminium 19" panel - 1 U
Automatic cassette removal by simple pressure
Possibility of removing each connector individually
Sockets with copper feedthrough cat. 6
Flat panel with empty cassettes to be equipped
Cat. 6 UTP - Mosaic Programme with connectors
10 0 786 22 White
24 RJ 45 connectors - 1 U
10 0 786 26 Aluminium 1 0 337 50 UTP
1 0 337 51 FTP
Cat. 6 FTP - Mosaic Programme
10 0 786 23 White
10 0 786 27 Aluminium
739
Legrand cabling system LCS3 cat. 5e Legrand cabling system LCS3 cat. 5e
flat patch panels to be equipped angled patch panels to be equipped with connectors
0 337 92
0 337 90
0 337 94 0 337 53
740
Legrand cabling system LCS3 cat. 5e Legrand cabling system LCS3 category 5e
equipment and accessories cables and cords
0 337 57 0 337 58
0 328 50 0 516 40
Pack Cat.Nos Common accessories for flat and angled Pack Cat.Nos Cables for local networks cat. 5e
panels
Port blanking modules 4 twisted pair cables 100 ohms
10 0 337 56 Divisible 6 port blanking plate LSZH sleeve: non-halogen
for sealing from 1 to 6 ports Grey RAL 7035
Colour code TIA/EIA
Cord management
1 LSZH PVC U/UTP - 4 pairs
0 337 59 For use with new generation Quick-Fix
They provide side cord management 305 1 0 327 50 Length 305m
Supplied in cardboard box. Weight 10 kg
Specific accessories for flat panels 500 1 0 328 53 Length 500 m
Supplied on reel. Weight 15 kg
Cassette for flat panels to be equipped 305 1
0 327 51 Length 305m
1 0 337 55 Empty removable cassette to be equipped with Supplied in cardboard box. Weight 9 kg
connectors. Accepts 6 cat. 5e to cat. 8 connectors.
Extraction by simple pressure of the cassette, F/UTP - 4 pairs
making installation and maintenance easier 305 1 0 327 52 Length 305 m
Possibility of removing each connector individually Supplied in cardboard box. Weight 12 kg
500 1
0 328 50 Length 500 m
High density cassette for flat panels to be Supplied on reel. Weight 21 kg
equipped 305 1
0 327 53 Length 305 m
1 0 337 95 Empty removable cassette to be equipped with Supplied by box. Weight 11 kg
connectors
Accepts 12 cat. 5e to cat. 6 A connectors RJ 45 patch cords and user cords
Extraction by simple pressure of the cassette, cat. 5e
making installation and maintenance easier
Possibility of removing each connector individually RJ 45 - RJ 45 right
PVC
Blanking cassette U/UTP unscreened impedance 100 Ω
1 0 337 57 To be used for blanking the panel Grey
1 0 518 17 Length 0.5 m
Specific accessories for angled panels 1 0 516 36 Length 1 m
Angled panel cover 1 0 516 37 Length 2 m
1 0 337 58 For optimised management of the air flow inside the 1 0 516 38 Length 3 m
cabinet 1 0 516 39 Length 5 m
F/UTP screened impedance 100 Ω
Grey
1 0 518 14 Length 0.5 m
1 0 516 40 Length 1 m
1 0 516 41 Length 2 m
1 0 516 42 Length 3 m
1 0 516 43 Length 5 m
1: in metre(s)
741
Legrand cabling system LCS3 category 5e
RJ 45 sockets - MosaicTM Programme, Arteor and Plexo
742
Legrand cabling system LCS3 category 6A, 6 and 5e
additional products and doublers
Vue arrière
743
Legrand cabling system LCS3 category 6A, Legrand cabling system LCS3 category 6A,
6 and 5e - telephone sockets, panels, units and cables 6 and 5e - accessories
0 517 09 0 327 60
0 787 31 0 335 79
Pack Cat.Nos Telephone sockets Pack Cat.Nos Crimping tool for RJ 45 plugs
RJ 11 and RJ 12 sockets Used for crimping plugs
Equipped with a modular Jack connector RJ 4/6/8/9 contacts
with 1/4 turn terminal for fast connection Ratchet control of crimping
Mosaic Arteor Tap-off possible mechanism
10 Able to cut and strip cables
0 787 30 5 723 00 White - RJ 11, 4 contacts 1 module 1
10 0 517 09 Tool with 3 crimping points
0 792 31 Aluminium - RJ 11, 4 contacts - High resistance steel material
1 module
10 5 728 00 Magnesium - RJ 11, 4 contacts - RJ plugs for round cables
1 module
10 0 787 31 5 723 13 White - RJ 11, 4 contacts - Gold-coated contacts 1.2 μm
2 modules RJ 11
10 5 728 13 Magnesium - RJ 11, 4 contacts - 50 0 517 01 4 contacts, width 9.65 mm
2 modules
10 0 787 32 5 723 12 White - RJ 12, 6 contacts - RJ 12
50 0 517 02 6 contacts, width 9.65 mm
2 modules
10 5 728 12 Magnesium - RJ 12, 6 contacts - RJ 45 cat. 5e
2 modules 50 0 517 03 8 contacts, width 11.70 mm
ISDN socket 50 0 517 04 9 contacts, width 11.70 mm
Self-stripping 1/4 turn terminals for fast RJ 45 sleeves
connection. Tap-off possible 50 0 517 06 Black
10 0 787 34 White - 8 contacts, 2.5 mm2 earth 50 0 517 07 White
terminal
Cable protection accessories
Single master - 2 modules
Plastic material
With IDC connection IP 66/67 guaranteed connection with the pair 0 533 02
Conform to British Telecom IP 55 with no connection for base with shutter
10 5 723 10 White Protection for RJ 45 shielded or unshielded cables
10 5 728 10 Magnesium ensuring a link of category 5
Conform to standards of the IEC 60603-7 series and
Single secondary - 1 module to standard IEC 61076-3-106 (version 5)
With IDC connection Compatible with products on the market
Conform to British Telecom Compatible with products on the market conforming
5 5 723 01 White to the standards listed
5 5 728 01 Magnesium Plug
3 0 533 00 Integrated PE with sealing ring and clamping blades
Patch panel telephone 50 ports 110 Tool-free assembly
Ability to protect cables of category 5e
connect
Flush-mounting base
1 0 335 79 19" panel - 1 U 3 0 533 01 Locking base
Supplied with RJ 45 female / female coupler cat. 5e
Cables for telephone networks
Kit
PVC sleeve - cat. 3. Colour white 3 0 533 02 Flush-mounting base + plug
Colour code TIA/EIA
Protective flap
U/UTP - 50 pairs 3 0 533 03 Fits on base Cat.No 0 533 01
1 0 328 91 Length 500m. Supplied on reel
U/UTP - 100 pairs Stripping tool
1 0 328 88 Length 500m. Supplied on reel Slits the sheath and releases the conductors by
rotation
Panels and units for incoming For twisted pair cables
telephone Does not damage the conductors
Assembled panels - 1 U Stripper
Fitted with 4 LCS2 RJ 45 units of 12 ports 1 0 332 62 For twisted pair and fibre optic cable
with fast tool-free connection
1
Cutting pliers
0 335 31 3-6/4-5 contacts for digital telephone 1 0 327 60 Cut wires cleanly without damaging the copper
1 0 335 30 4-5/7-8 contacts for analogue telephone
Incoming telephone units for self-
assembly panels
Fitted with 12 LCS3 RJ 45 ports with quick
tool-free connection
2 0 335 33 3-6/4-5 contacts for digital telephone
2 0 335 32 4-5/7-8 contacts for analogue telephone
110 tool
1 0 332 60 110 tool
5 0 332 61 Replacement blade
744
Legrand cabling system LCS³ Legrand cabling system LCS³ fibre optic
fibre optic preterminated solution cables
0 324 41 0 326 66
Pack Cat.Nos High density preterminated fibre optic links Technical characteristics see e-catalogue
Delivered on cardboard drums
Connection of high density drawer cassette LSOH sheath (except Cat.Nos 0 325 46 /47)
Low density micro-cable Euroclass Dca (except Cat.Nos 0 325 46/47/48)
Sheaths in LSZH, colour aqua (OM3) and yellow Colour code FOTAG
(OS2) Compliance with the EN 50173-2, ISO IEC 11801 standards
Supplied with test reports and unwinder Packing on drum
Fan-out - Fan-out: spark gap for optimum resistance Tight structure: "easy strip"
Low connector insertion loss LC < 0,15 dB/connector
MTP1 -MTP1 : low connector insertion loss Pack Cat.Nos OM 4 multimode fibre optic cables
MTP1 < 0.35 dB/connector (50/125 μm)
Other configurations on request
"Bend insensitive"
Micro cables OM3 Fan-out - Fan-out For multimode installations 50/125 μm,
Micro cables with spark gap, output 2 mm type OM 4
Tight
Designation Length (m) Loose structure Aqua sheaths
1 0 324 01 6 LC Duplex - 6 LC Duplex 10 tube 900 μm Suitable for 10 Giga Ethernet networks
1 0 324 02 6 LC Duplex - 6 LC Duplex 20 2000 0 325 43 Indoor/outdoor (glass strands)
1 0 324 03 6 LC Duplex - 6 LC Duplex 30 4 fibres - 2000 m
1 0 324 04 6 LC Duplex - 6 LC Duplex 40 2000 0 325 44 Indoor/outdoor (glass strands)
1 0 324 05 6 LC Duplex - 6 LC Duplex 50 8 fibres - 2000 m
1 0 324 11 12 LC Duplex - 12 LC Duplex 10 2000 0 325 45 Indoor/outdoor (glass strands)
1 0 324 12 12 LC Duplex - 12 LC Duplex 20 12 fibres - 2000 m
1 0 324 13 12 LC Duplex - 12 LC Duplex 30 2000 0 325 46 Outdoor, corrugated steel tape
1 0 324 14 12 LC Duplex - 12 LC Duplex 40 4 fibres - 2000 m
1 0 324 15 12 LC Duplex - 12 LC Duplex 50 2000 0 325 47 Outdoor, corrugated steel tape
8 fibres - 2000 m
Micro cables OS2 Fan-out - Fan-out 2000 0 325 48 Outdoor, corrugated steel tape
Micro cables with spark gap, output 2 mm 12 fibres - 2000 m
Designation Length (m) 2000 0 326 65 Indoor/outdoor (glass strands)
1 0 324 21 6 LC Duplex - 6 LC Duplex 10 6 fibres - 500 m
1 0 324 22 6 LC Duplex - 6 LC Duplex 20 2000 0 326 66 Indoor/outdoor (glass strands)
1 0 324 23 6 LC Duplex - 6 LC Duplex 30 6 fibres - 1000 m
1 0 324 24 6 LC Duplex - 6 LC Duplex 40 2000 0 326 67 Indoor/outdoor (glass strands)
1 0 324 25 6 LC Duplex - 6 LC Duplex 50 12 fibres - 1000 m
1 0 324 31 12 LC Duplex - 12 LC Duplex 10 2000 0 326 68 Indoor/outdoor (glass strands)
1 0 324 32 12 LC Duplex - 12 LC Duplex 20 24 fibres - 1000 m
1 0 324 33 12 LC Duplex - 12 LC Duplex 30
1 0 324 34 12 LC Duplex - 12 LC Duplex 40
1 0 324 35 12 LC Duplex - 12 LC Duplex 50
Micro cables OM3 MTP1
Designation Length (m)
1 0 324 41 12 fibre optics - MTP1 -MTP1 10
1 0 324 42 12 fibre optics - MTP1 -MTP1 20
1 0 324 43 12 fibre optics - MTP1 -MTP1 30
1 0 324 44 12 fibre optics - MTP1 -MTP1 40
1 0 324 45 12 fibre optics - MTP1 -MTP1 50
Micro cables OS2 MTP1
Designation Length (m)
1 0 324 51 12 fibre optics - MTP1 -MTP1 10
1 0 324 52 12 fibre optics - MTP1 -MTP1 20
1 0 324 53 12 fibre optics - MTP1 -MTP1 30
1 0 324 54 12 fibre optics - MTP1 -MTP1 40
1 0 324 55 12 fibre optics - MTP1 -MTP1 50
1: MTP is a registered trademark of US Conec Ltd
745
Legrand cabling system LCS³ fibre optic
cables (continued)
0 325 13 0 325 10
0 325 08
LSOH sheath (except Cat.Nos 0 325 13, 0 325 15, 0 325 23, 0 325 24, 0 325 25, 0 325 40, 0 325 41 and 0 325 42)
Euroclass Dca (except Cat.Nos 0 325 05/07/13/15/23/24/25/40/41/42)
Colour code: FOTAG
Compliance with the EN 50173-2, ISO IEC 11801 standards
Packing on drum (2000 m)
Tight structure: "easy strip"
Pack Cat.Nos OS 2 single-mode fibre optic cables Pack Cat.Nos OM 3 multimode fibre optic cables
(9/125 μm) - (OS1 compatible) (50/125 μm)
For single-mode installations 9/125 μm, "Bend insensitive"
type OS 2 For multimode installations 50/125 μm,
Tight
Loose structure Yellow or black sheaths for outdoor, Tight
type OM 3
tube 900 μm rodent guard... Loose structure Aqua sheaths
2000 0 325 02 Indoor/outdoor (glass strands) tube 900 μm Suitable for 10 Giga Ethernet networks
4 fibres 2000 0 325 10 Indoor/outdoor (glass strands)
2000 0 325 03 Indoor/outdoor (glass strands) 6 fibres
8 fibres 2000 0 325 11 Indoor/outdoor (glass strands)
2000 0 325 23 Outdoor, corrugated steel tape 12 fibres
4 fibres 2000 0 325 53 0 325 52 Indoor/outdoor (glass strands)
2000 0 325 24 Outdoor, corrugated steel tape 24 fibres
8 fibres 2000 0 325 37 Indoor/outdoor (glass strands)
2000 0 325 25 Outdoor, corrugated steel tape 4 fibres
24 fibres 2000 0 325 38 Indoor/outdoor (glass strands)
2000 8 fibres
0 325 12 Indoor/outdoor (glass strands) 2000
6 fibres 0 325 39 Indoor/outdoor (glass strands)
2000 12 fibres
0 325 13 Outdoor, corrugated steel tape 2000 0 325 40 Outdoor, corrugated steel tape
6 fibres 8 fibres
2000 0 325 14 0 325 50 Indoor/outdoor (glass strands) 2000 0 325 41 Outdoor, corrugated steel tape
12 fibres 12 fibres
2000 0 325 15 Outdoor, corrugated steel tape 2000 0 325 42 Outdoor, corrugated steel tape
12 fibres 24 fibres
2000 0 325 51 Indoor/outdoor (glass strands)
24 fibres
OM 2 multimode fibre optic cables
(50/125 μm)
For 50/125 μm multimode installations (OM 2)
Loose 900 μm Orange jacket or black for outdoor,
tube corrugated
Tight buffer
2000 0 325 55 Indoor/outdoor (universal)
4 fibres
2000 0 325 04 0 325 08 Indoor/outdoor (universal)
6 fibres
2000 0 325 05 Outdoor, corrugated steel tape
6 fibres
2000 0 325 06 0 325 09 Indoor/outdoor (universal)
12 fibres
2000 0 325 07 Outdoor, corrugated steel tape
12 fibres
746
Legrand cabling system LCS³ fibre optic
19” optic drawers
New LCS3
system
0 321 62 0 321 72
Pack Cat.Nos Equipped 19" optic drawers Pack Cat.Nos Fibre optic blocks
Metal equipped 19" optic drawers with 4 cable Clipped directly to the optic drawer to be equipped
inputs, supplied with fastening kit, 1 PE Ø 13.5 mm, (Cat.No 0 321 00) or to the fibre optic splice cassette
coiling system and pigtail cassette (Cat.No 0 321 41)
Panel and optic port marking on dedicated marking Single-mode fibre optic blocks (9/125 μm)
areas 1 0 321 17 ST block for 6 single-mode fibre optics
Sliding 1 0 321 10 SC duplex block for 6 single-mode fibre optics
End of travel stop with 30° tilting 1 0 321 11 SC duplex high density block for 12 single-mode
Maximum capacity either: fibre optics
- 24 ST and SC connectors 1 0 321 12 SC APC duplex block for 6 single-mode fibre optics
- 48 LC connectors 1 0 321 13 LC duplex block for 6 single-mode fibre optics
Depth 220 mm, height 1 U 1 0 321 14 LC duplex block for 12 single-mode fibre optics
1 0 321 61 12 SC duplex multimode connectors for 24 fibres 1 0 321 15 LC duplex high density block for 24 single-mode
1 0 321 62 24 LC duplex multimode connectors for 48 fibres fibre optics
1 0 321 63 24 ST multimode connectors for 48 fibres 1 0 321 16 LC APC duplex block for 12 single-mode fibre optics
1 0 321 64 12 SC duplex single-mode connectors for 24 fibres 1 0 321 33 Single-mode 4 MTP1 feedthrough adaptor
1 0 321 65 24 LC duplex single-mode connectors for 48 fibres Multimode fibre optic blocks (62.5 and 50/125 μm)
1 0 321 66 12 SC APC duplex single-mode connectors for 24 1 0 321 27 ST block for 6 multimode fibre optics
fibres 1 0 321 20 SC duplex block for 6 multimode fibre optics
1 0 321 67 24 LC APC duplex single-mode connectors for 48 1 0 321 21 SC duplex high density block for 12 multimode fibre
fibres optics
Rotating 1 0 321 23 LC duplex block for 6 multimode fibre optics
Delivered with reversible left or right opening 1 0 321 24 LC duplex block for 12 multimode fibre optics
Maximum capacity, either: 1 0 321 25 LC duplex high density block for 24 multimode fibre
- 72 LC connectors optics
- 36 SC connectors 1 0 321 34 Multimode 4 MTP1 feedthrough adaptor
Depth 260 mm, height 1 U
1 0 321 71 36 LC duplex multimode connectors for 72 fibres Copper block for fibre optic drawer
1 0 321 72 18 SC duplex multimode connectors for 36 fibres 1 0 321 32 To be clipped directly to the optic drawer to be
1 0 321 73 36 LC duplex single-mode connectors for 72 fibres equipped Cat.No 0 321 00
1 0 321 74 18 SC duplex single-mode connectors for 36 fibres Allows the mixing of fibre optic and copper
19" modular optic drawers Accessories for optic drawer to be
Metal modular 19" optic drawers with 8 cable inputs, equipped
supplied with fastening kit, 2 PE Ø 13.5 mm and Accessory for receipt of a fan-out
coiling system 0 321 28 To be clipped at the back of the drawer
Complete with new generation Quick-Fix for 1
Enables the entry of preterminated products
automatic mounting (no screws required) on the
risers of cabinets or enclosures Blank
Supplied with numbered labels 1 0 321 29 Blank block
End of travel stop with 30° tilting Pigtail cassette
Maximum capacity either 96 LC connectors, 48 SC 1 0 321 30 Capacity: 24 fibre optics
connectors or 24 ST connectors
Depth 215 mm, height 1 U Coiling kit
1 0 321 31 1 accessory
Sliding, equipped
Supplied with splice cassette 1: MTP is a registered trademark of US Conec Ltd
1 0 321 02 12 SC duplex multimode connectors for 24 fibres
1 0 321 04 24 LC duplex multimode connectors for 48 fibres
1 0 321 06 12 SC duplex single-mode connectors for 24 fibres
Sliding, to be equipped with fibre optic blocks
Accepts all fibre optic blocks; 4 blocks maximum
1 0 321 00 Empty drawer
747
Legrand cabling system LCS³ fibre optic
19" fibre optic drawers and mini-splicer
New LCS3
system
Pack Cat.Nos Modular 19" panel to be equipped with Pack Cat.Nos Accessories for 19" panel to be equipped
cassettes with cassettes
To be equipped with maximum 4 automatic Rear cable management accessory
extraction cassettes 1 0 321 46 For installation on panel Cat.No 0 321 40
Complete with new generation Quick-Fix for Cord management kit (guide/support/door)
automatic mounting (no screws required) on the 1 0 321 47 For installation on panel Cat.No 0 321 40; 2 side
risers of cabinets or enclosures cord management and front door with integrated
Maximum capacity either 96 LC connectors, 48 SC marking to ensure correct front and side cord
connectors or 24 ST connectors management
1 0 321 40 Depth 190 mm, height 1 U Cord support to be installed on the cassette to make
Optic drawer cassettes side passages easier
748
Legrand cabling system LCS³ fibre optic
19" high density and very high density fibre optic drawers
Pack Cat.Nos Ultra high density modular fibre optic Pack Cat.Nos Modular 19" panel to be equipped with
drawers to be equipped with cassettes cassettes
Fixed and modular chassis for the reception of the To be equipped with a maximum of 4 automatic
drawers extraction cassettes
Fibre optic drawers with front facing cord Complete with new generation Quick-Fix for
management automatic mounting (no screws required) on the
risers of cabinets or enclosures
Maximum capacity 4 U (up to 48 cassette) Maximum capacity either 96 LC connectors, 48 SC
- 576 LC connectors connectors or 24 ST connectors
Maximum capacity 2 U (up to 24 cassette) 1 0 321 40 Depth 190 mm, height 1 U
- 288 LC connectors
Maximum capacity 1 U (up to 12 cassette) High density MTP1 cassette (MPO compatible)
- 144 LC connectors
1 0 321 50 1U To be installed in the modular panel Cat.No 0 321 40
1 0 321 52 2U Sliding cassette that can be extracted by simple
1 0 321 53 4U pressure, making installation and maintenance easier
1 0 321 51 UHD panel to be equipped with cassettes without rear Front and rear extraction
management 1 U High performance MTP1 cassette, low insertion loss
<0.35 dB,
Very high density cassettes A/C polarity
They are clipped directly to the fibre optic drawers Fibre optic splice cassette
1 0 321 41 Accepts all modular fibre optic blocks
Cat.Nos 0 321 50/51/52/53
Sliding cassette for the above chassis Copper cassette to be equipped
Front or rear cassette extraction 1 0 337 55 Accepts 6 cat. 5e, cat. 6 and cat. 6 A connectors
MTP1 high performance cassette
Low insertion loss < 0,35 dB Multimode OM4 cassettes (50/125 μm)
1 0 321 42 MTP1 cassette (MPO compatible)
A/C polarity
24 LC OM4 Type A/C
Multimode OM4 cassette (50/125 μm) 1 0 321 43 MTP1 cassette (MPO compatible)
For OM4 type 50/125 μm multimode installations 12 SC OM4 Type A/C
1 0 321 54 MPO cassette Single-mode OS2 cassettes (9/125 μm)
12 LC OM4 Type A/C OS2 type
OS2 cassette (9/125 μm) 1 0 321 44 MTP1 cassette (MPO compatible)
For OS2 type 9/125 μm multimode installations 24 LC OS2 Type A/C
1 0 321 55 MPO cassette 1 0 321 45 MTP1 cassette (MPO compatible)
12 LC OS2 Type A/C 12 SC OS2 Type A/C
Blanking cassette
MTP1 adaptors (MPO compatible) 1 0 337 57 To be used for blanking the panel
To be clipped directly to the fibre optic drawers
Cat.Nos 0 321 50/51/52/53 MTP1 adaptors
1 0 321 56 Multimode 4 MTP1 adaptor To be installed in splice cassette Cat.No 0 321 41
1 0 321 57 Single-mode 4 MTP1 adaptor Enables MTP1 /MTP1 feedthrough
1 0 321 33 Single-mode 4 MTP1 adaptor
LC adaptor 1 0 321 34 Multimode 4 MTP1 adaptor
To be clipped directly to the fibre optic drawers
Cat.Nos 0 321 50/51/52/53 Accessories for 19" panel to be equipped
1 0 321 58 Adaptor 12 LC multimode with cassette
Rear cable management accessory
1 0 321 46 For installation on panel Cat.No 0 321 40
Cord management kit (guide/support/door)
1 0 321 47 For installation on panel Cat.No 0 321 40; 2 side cord
management and front door with integrated marking
to ensure correct front and side cord management
Cord support to be installed on the cassette to make
side passages easier
1: MTP is a registered trademark of US Conec Ltd
749
Legrand cabling system LCS³ fibre optic Legrand cabling system LCS³
pigtails, glue-on connectors and fan-out units fibre optic - case and quick-connect connectors
0 322 20 0 322 31
0 322 70
750
Legrand cabling system LCS³ fibre optic
patch cords
0 326 07 0 326 13
Fitted with ceramic ferrule connectors on each end. Individually packed and tested (report supplied). Zipcord LSZH sheath
Pack Cat.Nos OS 1/OS 2 (UPC) single-mode optical cords Pack Cat.Nos OM 2 multimode fibre optic cords (50/125 μm)
Optic losses max/Master: 0.25 dB Optic losses max/Master: 0.25 dB
For single-mode installations 9/125 μ m, type OS 1/ For multimode installations 50/125 μ m, type OM2
OS 2. Yellow sheaths Orange sheaths
SC/SC duplex cords ST/ST duplex cords
3 0 326 00 Length: 1 m 3 0 330 80 Length: 1 m
3 0 326 01 Length: 2 m 3 0 330 81 Length: 2 m
3 0 326 02 Length: 3 m 3 0 330 82 Length: 3 m
SC/LC duplex cords SC/SC duplex cords
3 0 326 03 Length: 1 m 3 0 330 69 Length: 1 m
3 0 326 04 Length: 2 m 3 0 330 70 Length: 2 m
3 0 326 05 Length: 3 m 3 0 330 71 Length: 3 m
LC/LC duplex cords ST/SC duplex cords
3 0 326 28 Length: 0.5 m 3 0 330 72 Length: 2 m
3 0 326 06 Length: 1 m 3 0 330 73 Length: 3 m
3 0 326 07 Length: 2 m
3
LC/LC duplex cords
0 326 08 Length: 3 m 3 0 330 61 Length: 2 m
3 0 326 29 Length: 5 m
SC/LC duplex cords
LC/LC Uniboot duplex cords 3 0 330 75 Length: 1 m
Reversible polarity 3 0 330 63 Length: 2 m
3 0 326 86 Length: 1 m 3 0 330 76 Length: 3 m
3 0 326 87 Length: 2 m
3 0 326 88 Length: 3 m LC/ST duplex cords
3 0 326 89 Length: 5 m 3 0 330 65 Length: 2 m
3 0 326 92 Length: 10 m
Fibre optic feedthrough sockets
OM 4 multimode fibre optic cords (50/125 μm) Equipped with 2 inputs / 2 outputs duplex
Suitable for 10 Giga Ethernet networks feedthrough
Optic losses max/Master: 0.15 dB Enable the connection of two fibre optics
For multimode installations 50/125 μm, type OM 4 (fitted with their connectors)
Aqua sheaths Supplied with protection caps
Equipped with a clear nameplate holder
SC/SC duplex cords 2 modules
3 0 326 30 Length: 1 m
3 0 326 31 Length: 2 m 2 x ST fibre optic feedthrough socket
3 0 326 32 Length: 3 m Bayonet mount (STII compatible)
1 0 786 16 White
LC/LC duplex cords
3 0 326 33 Length: 0.5 m
3 0 326 34 Length: 1 m
3 0 326 35 Length: 2 m 2 x SC fibre optic feedthrough socket
3 0 326 36 Length: 3 m "Push-pull" connection
3 0 326 37 Length: 5 m 1 0 786 17 White
LC/LC Uniboot duplex cords
Reversible polarity
3 0 326 95 Length: 1 m 2 x LC fibre optic feedthrough socket
3 0 326 96 Length: 2 m "Push-pull" connection
3 0 326 97 Length: 3 m 1 0 786 18 White
3 0 326 98 Length: 5 m
3 0 326 99 Length: 10 m
Socket with fibre optic feedthrough 2 x SC/APC
OM 3 multimode fibre optic cords (50/125 μm) Push-pull connection
Suitable for 10 Giga Ethernet networks With shutters
Optic losses max/Master: 0.25 dB 1 0 786 14 White
For multimode installations 50/125 μ m, type OM 3
Aqua sheaths
SC/SC duplex cords
3 0 326 09 Length: 1 m
3 0 326 10 Length: 2 m
3 0 326 11 Length: 3 m
SC/LC duplex cords
3 0 326 12 Length: 1 m
3 0 326 13 Length: 2 m
3 0 326 14 Length: 3 m
LC/LC duplex cords
3 0 326 15 Length: 1 m
3 0 326 16 Length: 2 m
3 0 326 17 Length: 3 m
751
Legrand cabling system LCS3 switches and PoE injectors
Pack Cat.Nos Flush-mounting Ethernet 10/100 base T Pack Cat.Nos Power over Ethernet (PoE) injectors
switches Midspan
For networking computer peripherals without a patch 1 0 335 01 4 inputs/outputs
panel: computers, printers, servers, etc. Supply 4 Wi-Fi access points
Possibility of extending an existing network by Attach directly to the patch panel conform with
simply replacing an RJ 45 socket standard IEEE 802.3 af
Tool-free connection 1 0 327 37 1 input/1 output
Conform with standards IEEE 802.3 (Ethernet) and
EN 500 81/82-2 (EMC requirements) Mosaic VDI distribution block without
Installation in all supports with minimum 40 mm depth connectors
6 ports at the front + 1 side RJ 45 connector for
cabling and carrying out link tests 1 0 332 80 16 modules
Port status display integrated into the RJ 45 connectors Dimensions: 135 x 223 x 57 mm
Labelling of each port from 1 to 6 and marker holder For small patch panel
for switch identification For mounting a Mosaic switch
6 modules Cat.Nos 0 779 00/01/20
Non manageable 230 V supply -
Mosaic Programme
1 0 779 00 White
Non manageable PoE supply (802-3 af) supply -
Mosaic Programme
1 0 779 01 White
Non manageable 230 V supply - Arteor
1 5 720 83 White
PoE switches
Ethernet switches with EndSpan PoE and PoE+
injector (IEEE 802.3 af and 802.3 at compliant)
Enable power supply over 4 Ethernet ports to
equipment (e.g. Wi-Fi access point, IP camera, etc.)
CCTV management
Supplied with power supply and DIN rail fixing
accessory
Dim.: 135 x 27 x 86 mm
1 0 335 08 1 Gigabit PoE Ethernet switch
1 0 335 03 10/100 Mbps PoE Ethernet switch
752
Audio/video system
audio/video sockets
Pack Cat.Nos HDMI type A sockets Pack Cat.Nos HD15 sockets (continued)
Used to transmit high-definition digital Screw-type female HD15 sockets
audio/video streams between a source Mosaic 2 modules + 3.5 mm Jack
Arteor
(computer, Blu-Ray player,...) and a 1 0 787 74 5 722 88 White
compatible receiver (TV, videoprojector,...) 1 5 727 88 Magnesium
Preterminated sockets HDMI 1.4 - 1 module
Mosaic Arteor Equipped with cord, length 15 cm Solder-type female HD15 sockets
1 0 787 78 5 720 96 White 1 module
1 0 793 78 Alu 15 pin
1 5 725 96 Magnesium 1 0 787 72 5 722 79 White
1 5 727 79 Magnesium
Screw-type sockets HDMI 1.3 - 2 modules
1 0 787 681 5 722 81 White
1 0 792 751 Alu
Videoprojector switch
1 5 727 81 Magnesium Universal remote switch allowing to turn
ON or place in STANDBY mode a video
HDMI extender projector
1 0 517 38 Extends HDMI audio/video Works with all videoprojectors or TV
signals up to 60m and up through IR learning process
to a 4K resolution using Installed close to the room's lighting
HDBaseT Lite technology switches, it replaces the constructors
Support of IR control allows remote and fosters the ignition and
a device to be remotely extinction of the video projector therefore
controlled reducing energy consumption and
Used to connect remote HDMI terminals up Mosaic Arteor extending the bulb's lifetime
1 0 787 99 5 720 89 White
to 57 m
The kit comprises transmitter and receiver
units as well as power supplies
The transmitter and receiver are linked by
an RJ 45/RJ 45 cable (not supplied) (see
p. 736)
Compatible with 4K, 3D, EDID and HDCP
Including infrared control
Certified HDBaseT
Display port sockets
Used to transmit high-definition digital
audio/video streams between a source
(laptop, computer, etc) and a compatible
receiver (videoprojector, TV,...)
Preterminated socket - 1 module
Mosaic Arteor Equipped with cord, length 15 cm
1 0 787 91 5 720 90 White
1 5 725 90 Magnesium
HD15 sockets
Used to transmit analog video streams
(VGA, XGA, UXGA depending on graphic
card) between a source (computer) and a
compatible receiver (video projector, TV,...)
Preterminated sockets - 1 module
Mosaic Arteor Equipped with cord, length 15 cm
1 0 787 77 5 720 97 White
1 0 793 77 Alu
1 5 725 97 Magnesium
Screw-type female HD15 sockets
2 modules
1 0 787 571 5 722 82 White Audio/video patch panels,
1 0 792 571 Alu
1 5 727 82 Magnesium
cables and cords,
p. 756
1: Can be installed in receptacles for floor sockets p. 479
753
Audio/video system
audio/video sockets (continued)
Pack Cat.Nos Jack sockets 3.5 mm Pack Cat.Nos 3-pole XLR sockets
3.5 mm Jack connectors can be used to Provide the stereo link for microphone,
create audio links amplifier, mixing console, etc.
Preterminated sockets - 1 module Recommended cable: 1 audio pair 0.14 mm²
to 0.5 mm2 shielded
Mosaic Arteor Equipped with cord, length 15 cm Max. cable length: 50 m (without amplifier)
1 0 787 79 5 720 91 White 2 modules
Mosaic Arteor
1 0 793 79 Alu 1 0 787 55 5 722 83 White - Fast screw connection
PUSH
4 screw-type female 3.5 mm Jack socket 1 0 792 55 Alu - Fast screw connection female
- 1 module 1 5 727 83 Magnesium - Fast screw
1 0 787 64 5 722 74 White connection female
1 0 792 64 Alu 1 0 787 56 5 722 77 White - Fast screw connection male
XLR
1 5 727 74 Magnesium 1 5 727 77 Magnesium - Fast screw
connection male
Solder-type female 3.5 mm Jack socket
- 1 module 4-pole Speakon
1 0 787 73 5 722 78 White
1 5 727 78 Used to connect power enclosures
Magnesium Recommended cable: 2 audio pairs 4 mm2
Max. cable length: 50 m (without amplifier)
Female 2 RCA sockets Mosaic 2 modules
Provide the stereo audio link for any 1 0 787 60 White
peripheral device such as a DVD drive,
camera, video recorder
1 module Loudspeaker sockets
Preterminated Mosaic Arteor Terminal 4 mm²
Mosaic Arteor Equipped with a 15 cm cord 10 0 787 51 5 722 80 White - 2 modules
1 0 787 47 5 720 92 White 10 5 727 80 Magnesium - 2 modules
1 5 725 92 Magnesium
10 0 787 50 5 722 70 White - 1 module
Connection via screw terminals 10 0 792 50 Alu - 1 module
1 0 787 53 5 722 72 White 10 5 727 70 Magnesium - 1 module
1 5 727 72 Magnesium
Attenuators
Female 3 RCA sockets 1 00 V-25 W
Provide the composite video and stereo Allow to adjust power to 25 W from a
audio links for any peripheral device such balanced 100 V loudspeaker line
as a DVD drive, camera, video recorder, Mosaic Arteor 2 modules
videoconferencing, etc 1 0 787 76 5 722 84 White
1 module 1 5 727 84 Magnesium Min
754
Audio/video system
HDMI cords and adaptors, HD15 cords and audio cords
Pack Cat.Nos HDMI cords, booster and adaptors Pack Cat.Nos HD15 cords
®
HDMI High Speed with Ethernet cords - HD15 male/male cords
for 4K resolution and 3D video For connecting an HD15 socket to a video
For connecting an HDMI socket to an terminal (PC, video projector, etc.)
audio/video terminal (computer, video Plastic bag
Supports up to QXGA (2048x1536)
projector, TV, Blu-Ray player, home Plastic bag with hook resolution
cinema, games console, etc.) 1 0 517 29 0 398 50 Length 2 m
Plastic bag
1.4 HDMI cords 1 0 517 30 Length 5 m
Plastic bag with hook Gold plated connectors
1 1 0 517 23 Length 10 m
0 517 32 0 398 51 Length 1 m 1
1 0 517 33 0 398 52 Length 2 m 0 517 31 Length 15 m
1 0 517 34 0 398 53 Length 3 m HD15 cord + 3.5 mm Jack
1 0 517 27 0 398 54 Length 5 m 1 0 517 22 Length 2 m
1 0 517 35 0 398 55 Length 7 m For connecting an HD15 video socket and
HDMI® standard with Ethernet cords - for a 3.5 mm audio Jack to a terminal (PC,
1080i resolution and 3D video video projector)
For connecting an HDMI socket to an Audio cords
audio/video terminal (computer, video Plastic bag
projector, TV, Blu-Ray player, home RCA male/male audio stereo cords
Plastic bag with hook
cinema, games console, etc.) 1 0 514 03 0 398 67 Length 2 m
1.4 HDMI cords 1 0 514 04 0 398 68 Length 5 m
Gold plated connectors Jack 3.5 mm male to 2 RCA male Y cords
1 0 517 20 Length 10 m 1 0 514 05 0 398 69 Length 2 m
1 0 517 36 Length 15 m 1 0 514 06 0 398 70 Length 5 m
HDMI to HDMI micro cord Jack 3.5 mm male/male audio stereo
1 0 398 56 Length 2 m cords
1 0 514 07 0 398 71 Length 2 m
HDMI Booster
1 1 0 514 08 0 398 72 Length 5 m
0 779 30 For extending an HDMI connection
Consists of 2 female connectors and used TOSLINK optical digital cord
as an addition to the HDMI cord 1 0 398 73 Length 2 m
Does not need external power supply
XLR cord
HDMI 90° adaptor 1 0 517 24 Length 2 m
1 0 517 37 0 398 57 HDMI male to HDMI female 90° adaptor
For connection in tight areas
Display Port cord
1 0 514 00 0 398 58 Length 2 m
For connecting a Display Port socket to an
audio/video terminal (PC, video projector,
etc.)
HDMI extender
p. 753
755
Audio/video system
type-C USB adaptors and cords, data cords, cables and patch panels
HDMI extender
p. 753
756
Audio/video system Audio/video system
kits kits
Q MediaHub
Charger, Bluetooth, HDMI and USB Data in 1 product:
plug these devices to watch their contents on TV
Power supply
(AC line
110/220V
50-60 Hz)
757
Legrand cabling system LCS³ Enclosures
server cabinets and cable entries
758
Legrand cabling system LCS³ Enclosures
cable clips
759
Legrand cabling system LCS³ Enclosures
cable ducts and accessories
Material: steel
Finishing: powder coating
Colour: RAL 9011 (black)
Pack Cat.Nos Cable ducts Pack Cat.Nos Covers and end plates for cable ducts
Cable ducts height 120 mm for optimising the Depth of narrow cable duct: 200 mm
cabling of a cabinet Depth of wide cable duct: 600 mm
For large cabinets, possibility to combine a wide Covers
cable duct and a narrow one to achieve a triple
compartmentalisation: allows, for example, the For keeping content safely separated and
fibre optic, copper data and power cables to be providing protection against dust
sufficiently separated Narrow Wide Can be assembled directly onto the cable
cable duct cable duct ducts
Wide cable ducts 1 4 460 62 4 460 66 Width of the rack: 600 mm
Cable ducts depth 600 mm to be placed by the 1
central roof entry point 4 460 63 4 460 67 Width of the rack: 800 mm
Narrow Wide
Suitable for guiding large amounts of cabling into end plate End plates
end plate
the cabinet on the left and/or right 1
Equipped with a movable partition allowing, for 4 460 70 4 460 71 For closing off cable ducts at the end of
example, the separation of fibre optic and copper the row
cables Width of the rack: 600, 800 and 1000 mm
Equipped with waterfalls to create the correct Supplied with assembly materials
radius of curvature for the cables, facilitate the
cabling and support the cable structure at the side
of the cabinet so that the equipment can still be
accessed easily
1 4 460 64 Wide cable duct. Width of the rack: 600 mm
1 4 460 65 Wide cable duct. Width of the rack: 800 mm
Narrow cable ducts and partitions
Cable ducts depth 200 mm to be placed by the
cabinet’s rear roof cable entry points
Suitable for small amounts of cabling (for example to
connect servers)
1 4 460 60 Narrow cable duct. Width of the rack: 600 mm
1 4 460 61 Narrow cable duct. Width of the rack: 800 mm
1 4 460 68 Partition. Width of the rack: 600 mm
1 4 460 69 Partition. Width of the rack: 800 mm
760
Legrand cabling system LCS³ Enclosures
cable bridges and connecting sets
Material: steel
Finishing: powder coating
Colour: RAL 9011 (black)
Pack Cat.Nos Cable bridges Pack Cat.Nos Connecting sets
1 4 460 72 For crossing a hot or cold aisle containment system 1 4 460 48 Set of internal and external rack connectors (6
Suitable for wide or narrow cable ducts pieces) for connecting cabinets together
Sliding system: the distance between the cable Various combinations are available of both internal
ducts can be bridged at any spot without any sawing connector tubes and external connector plates
being necessary. Cable ducts can be installed at External connector plates can be screwed onto
various distances along the depth of the aisle (for the outsides of the structural uprights and are
example to save on the number of branches in the invisible when the door is closed
main supply or for intra-connectivity within the aisle Recommended installation: at least 2 connections
containment) in the front and back planes
Several bridges can be used depending on the Use 2 sets for 25 U or more
capacity required, or to keep various cables Capacity: 150 mm
separated Supplied with fastening materials
Height: 120 mm
Width: 150 mm
Usable length: 990 to 1750 mm
Supplied with assembly materials
Cover for cable bridges
1 4 460 73 For keeping content safely separated and
providing protection against dust
Can be assembled directly onto the cable bridges
Possibility to have the covers overlap so that
multiple covers can be used to ensure proper
coverage of the cable bridge
Capacity: 150 mm
Usable length: 1030 mm
Supplied with assembly materials
761
Legrand cabling system LCS³ Enclosures
aisle containment
762
Legrand cabling system LCS³ MINICUBE
Enclosures - MiniCube
LEGRAND’S
Quick fixing
EFFICIENT & TURNKEY
MICRO
DATA CENTER
Reduces the size of your server rooms and your
energy consumption costs with our high-performant,
innovative micro-data center solution: MiniCube!
6 468 26
Standardisation: high
Cooling: in-rack
Racks: 1
Power distribution: 1
UPS: 1
Redundancy: N
Plug & Play: Yes
Completeness: total solution
Monitoring: onsite/remote
Cost-efficiency: high
Target use cases: hybrid IT, SME
Pack Cat.Nos MiniCube configuration
Rack solution suitable for installing IT
equipment
Conform to CE/ IEC60950 standard
For indoor use only. Ambient conditions:
10 °C - 55 °C
Equipped with:
- a cooling unit (built on top)
- a UPS system (to ensure continuity of
service)
- a PDU, connected to the UPS (IT
equipment can be powered with this PDU)
Dimensions: 800 x 1200 x 2280 mm
1 4 461 70 Basic PDU
Available space: 33 U
1 4 461 71 Intelligent PDU + monitoring
Available space: 31 U
1 4 461 72 Intelligent PDU + monitoring + automatic
door opening system
Available space: 30 U
Accessories for MiniCube
Communication card
1 3 109 30 SNMP and Modbus communication card
for UPS
Zero-U PDU IEC 60320 standard
1 6 468 62 20 C13 outlets + 4 C19 outlets with cord
locking system. 3m power supply cord with
IEC 60309 16 A 2P+E plug
Metered PDU PXE
1 RRPXE-1493T-A6K1 20 C13 outlets + 4 C19 outlets. 3m power
supply cord with IEC 60309 32 A 2P+E SIMPLY PERFORMANT YOUR ALL-IN-ONE
plug, including energy metering Reliable and efficient SOLUTION
19'' PDUs solution for server The MiniCube is a pre-
PDUs with 1 m C20 input rooms
1 6 468 26 With 9 German standard outputs
configured and truly
1 6 468 27 With 9 UTE outputs No dependency on the plug-and-play compact
1 6 468 28 With 7 BS1363 outputs solution comprising all
1
building, easy to deploy
6 468 29 With 10 T23 outputs
Use of proven needed systems:
technologies Housing
Turn-key solution, Power supply
including installation Monitoring
and start-up Cooling
763
Legrand cabling system LCS³ Enclosures
cabling cabinets and accessories
Pack Cat.Nos 19" cabling cabinets – 800 mm wide Pack Cat.Nos Cable trunking
Suitable for use with patching, network and server Trunking suitable for vertical cable management
equipment Can easily be fitted from the inside (left or right) to the
Stand-alone racks come with (removable) side panels upper and lower frame. Available in 2 heights
Specifications: Material: sheet steel. Finishing: galvanised
- frame: aluminium, demountable Cables can be attached to the trunking using tie-
- supplied with a 25 mm or 100 mm plinth wraps and/or Velcro
- load capacity: 1500 kg (static) Supplied with 1 cable trunking element including
- base size: 800 mm wide fasteners
Doors (800 and 1000 mm racks): Height Width
- (clear) glass front door, metal back door 1 4 460 95 41 U 200 mm
- right-hinged and fitted with a Fix-easy swivel handle 1 4 460 96 46 U 200 mm
with an EK-333 cylinder lock
Roof: 3 or 4 cut-outs with 2 or 3 blind plates and 1 Triple fan unit with IEC connectors
cable entry brush, depending on the frame size 1 4 460 97 For cooling a rack
Interior: rack equipped with 4 x 19" profiles including Connection via IEC-320 C13 connectors
height (U) indication. Distance to the rack front: set to Flow under normal load: 310 m³/h
175 mm (pitch set to 740 mm). In case of racks depth Flow with no load: 480 m³/h
800 mm, distance to the back set to 87.5 mm (pitch Can be automatically switched on using thermostat
set to 537.5 mm) Cat.No 4 460 98
Racks supplied with 20 cage nuts and screws Several fan units can be combined together using a
Capacity Width Depth Height cable with IEC-320 C13 / C14 connectors
(mm) (mm) (mm) Supplied with 1 power cable and 1 extender cable
1 4 460 80 25 U 800 800 1300 including fastenings
1 4 460 81 25 U 800 1000 1300
1 4 460 82 37 U 800 800 1800 Thermostat for triple fan unit
1 4 460 83 37 U 800 1000 1800
1 1 4 460 98 230 VAC / 50 Hz - 110 mA - 23 dB - 12 W
4 460 84 41 U 800 800 2000
1 4 460 85 41 U 800 1000 2000 Can be associated with a triple fan unit and a roof
1 4 460 86 46 U 800 800 2200 plate
1 4 460 87 46 U 800 1000 2200 Ensures that the fan unit is switched on at a
temperature previously selected
Extended plinths for 19" cabling cabinets Supplied with 1 fan unit including assembly materials
Perforated front and rear plinths to be used for:
- heightening a cabinet by 75 mm: makes room for
airflow and/or cabling
- creating a natural airflow in the cabinet
Capacity Width Depth Height
(mm) (mm) (mm)
1 4 460 88 41 U 800 800 2075
1 4 460 89 41 U 800 1000 2075
1 4 460 90 46 U 800 800 2275
1 4 460 91 46 U 800 1000 2275
764
Legrand cabling system LCS³ Enclosures
assembly profiles and cable clip
Pack Cat.Nos Assembly profiles with cable guides Pack Cat.Nos Plastic cable clip
For achieving clearly ordered and arranged cabling Set of 10 plastic cable clips for cable management
Can be fitted and removed without machine tools Can be attached without tools to the standard cable
Cannot be used in a rack that is 600 mm wide trunking
Capacity: 24 cables per 1 U. The radius is particularly Material: polyamide
suitable for fibre optic cables Fire class: UL94-V0
Length: 87 mm Width Depth
Halogen-free (mm) (mm)
Material: polyamide 1 4 460 57 40 78
Fire class: UL94-V0
Colour: RAL 5015
10 cable guides front
Supplied with cable guides including fasteners
Height Capacity Height
(mm)
1 4 460 50 41 U 38 U 2000
1 4 460 51 46 U 43 U 2200
1 4 460 54 20 cable guides (without profile)
Assembly profiles with high-volume cable
guide on 19" profiles
For a rapid and effective ordering of a high volume of
cables
Material: polyamide
Colour: black
Supplied with assembly materials
1 4 460 99 6 U assembly profile
1 4 460 52 41 U assembly profile
1 4 460 53 46 U assembly profile
765
Legrand cabling system LCS³ Legrand cabling system LCS³
Enclosures - cabling openrack and accessories Enclosures - wall mounting enclosures
4 461 54 4 461 57
4 461 55 4 461 58
4 461 92
Pack Cat.Nos Cabling openrack and accessories Pack Cat.Nos Wall-mounting enclosures with glass door
1 4 461 50 Punched hole channel rack, 7ft x 24", black, 3/8" square Consist of:
hole - a wall element with an integrated strain relief profile
1 4 461 52 Cable duct with door - 4 bars running front to back
1 4 461 54 Hexagonal cable throughs (set of 6) - 2 cable entry plates (top and bottom)
1 4 461 55 Bend limiting clips (set of 12) - a set of two 19" profiles with adjustable depth (in steps
1 4 461 56 Cable management spools (set of 4) of 50 mm) and a pattern of holes on the side allowing
1 4 461 57 Cable management rings accessories to be fitted. The casing consists of two
1 4 461 58 Cable duct mounting brackets (top of rack Cablofil) identical upper and lower panels with ventilation slots
1 4 461 60 Overhead Cable Pathway, 5 U, 19" at the rear, two identical side panels and a Securit
1 4 461 59 Horizontal cable manager glass door with an EK-333 cylinder lock with a handle.
1 0 465 70 19'' cable manager with cover - 1 U Possibility to adjust the cable holes' size on the spot
1 0 465 71 19'' cable manager with cover - 2 U thanks to the handy bend-away fingers
1 0 464 23 Screws Width: 600 mm
Colour: RAL 9011
Finishing: powder coating
Max. load: 100 kg
Supplied with 1 rear plate, 4 depthwise bars, 2 cable
entry plates, 2 19" profiles, 2 roof and floor plates, 2
side panels, 1 glass door, 1 assembly set, including
assembly guide
Capacity Width Depth Height
(mm) (mm) (mm)
1 4 461 80 6U 600 525 342
1 4 461 81 9U 600 525 476
1 4 461 82 9U 600 625 476
1 4 461 83 12 U 600 525 609
1 4 461 84 12 U 600 625 609
1 4 461 85 15 U 600 525 742
1 4 461 86 15 U 600 625 742
1 4 461 87 21 U 600 625 1009
Accessories
Cable entry strip for wall enclosure
1 4 461 90 For dust-free cable entry. To be used in replacement of
a top and/or bottom cable entry plate
Supplied with 1 (360 mm) cable entry brush, including
fastenings
Corner guide set
1 4 461 91 Comprises 2 corner guide supports (left and right)
and fastening materials
To be fitted specifically to the sides of the 19" profiles
Supports heavy 19" equipment
Suitable for wall enclosure
Material: sheet steel
Colour: Sendzimir
Roof plate with integrated fan unit
Can be added as an option to generate a forced flow
of cooling air through the wall enclosure
Comes in replacement of an existing roof panel
Can be associated with thermostat Cat.No 4 460 98
Supplied with assembly materials
1 4 461 92 Depth: 525 mm
1 4 461 93 Depth: 625 mm
766
Legrand cabling system LCS³ Legrand cabling system LCS³ Enclosures
Enclosures - accessories for wall mounting enclosures 19” accessories
0 465 22 0 465 23
1 0 465 23 2 U
767
Legrand cabling system LCS³ Enclosures
19” accessories (continued)
0 465 01 0 465 22
768
Legrand cabling system LCS³ Energy Distribution
single phase Zero-U Power Distribution Units
6 468 53 6 468 61
769
Legrand cabling system LCS³ Energy CORD LOCKING SYSTEM
Distribution - three phase Zero-U Power Distribution Units
Innovation
at the heart
of PDUs to prevent
accidental
disconnection
A major addition to the range
and exclusive to Legrand, C13 and
6 468 75
C19 outlets have a power supply
cord locking system which prevents
accidental disconnection
To provide ~ electric power for IT equipment in 19" enclosures
Three phase Zero-U PDUs for vertical mounting in the cabinet and guarantees absolute safety!
380 V - 50/60 Hz power supply
Each circuit is protected by 16 A single pole MCB in a support with
projecting edges to avoid accidental breakdown. 1 circuit per phase,
each with 6 IEC 60320 C13 outlets and 2 IEC 60320 C19 outlets
330° rotating cable input for a perfect orientation of the cable and no
interference in the cabinet
C13 and C19 standard outlets are equipped with cord locking system to
avoid any accidental disconnection. Universal solution compatible with
all the cords (C14 plugs for C13 and C20 plugs for C19)
Delivered with 2 sets of metallic mounting brackets: button brackets (for
quick fixing and variable pitch) and standard brackets (for screw fixing)
Black modules (outlets and functions)
Aluminium profile
An innovative technical solution: very easy
Pack Cat.Nos Standard to identify thanks to the orange buttons next
to each outlet
AUTO LOCKING
1
UNLOCKING
770
Legrand cabling system LCS³ Energy Distribution
1U Power Distribution Units
Quick fixing
To provide A electric power for IT equipment in enclosure. 230 V - 50/60 Hz power supply. 1U aluminium profile. End cap with metallic brackets and
cable holder shape. Quick fixing (no screws) on 19" fixing centers. Can also be installed vertically by reverting the brackets (no screws)
2P+E outlets:
- C13 and C19 standard outlets are equipped with cord locking system to avoid any accidental disconnection. Universal solution compatible with all
the cords (C14 plugs for C13 and C20 plugs for C19).
- French, German and British standard outlets are equipped with blanks
- French and German standard outlets are inclined at 55°
Black modules (outlets and functions)
Pack Cat.Nos 19” - PDU standard Pack Cat.Nos 19” - PDU with power indicator or luminous
switch
German standard
3 m power supply cord with 16 A 2P+E French/ LED indicator: signals whether the PDU is supplied
German plug with power or not
1 6 468 06 6 outlets LED indicator switch: powers on/off the PDU
1 6 468 12 9 outlets German standard
British standard 3 m power supply cord with 16 A 2P+E French/
3 m power supply cord with 13 A 2P+E British plug German plug
1 1 6 468 21 9 outlets and 1 power indicator
6 468 13 8 outlets
1 6 468 23 8 outlets and 1 luminous switch
French standard
3 m power supply cord with 16 A 2P+E French/ British standard
German plug 3 m power supply cord with 13 A 2P+E British plug
1 6 468 05 6 outlets 1 6 468 24 6 outlets and 1 luminous switch
1 6 468 10 9 outlets French standard
1 6 468 11 9 tamperproof red outlets 3 m power supply cord with 16 A 2P+E French/
IEC 60320 standard German plug
Connection on terminal block (except Cat.No 6 468 15) 1 6 468 20 9 outlets and 1 power indicator
1 6 468 14 10 C13 outlets with cord locking system 1 6 468 22 8 outlets and 1 luminous switch
1 6 468 15 12 C13 outlets with cord locking system
3 m power supply cord with 16 A IEC 60309 2P+E
1 6 468 09 6 C13 outlets + 2 C19 outlets with cord locking
system
1 6 468 07 6 C19 outlets with cord locking system
10" - PDU standard
1 m power supply cord 2P+E French/German plug
4 x 2P+E outlets
1 6 468 01 German standard
1 6 468 00 French standard
771
Legrand cabling system LCS³ Energy Distribution
1U Power Distribution Units (continued)
6 468 36
To provide A electric power for IT equipment in enclosures. 230 V - 50/60 Hz power supply. 1U aluminium profile. End cap with metallic brackets and
cable holder shape. Quick fixing (no screws) on 19" fixing centers. Can also be installed vertically by reverting the brackets (no screws)
2P+E outlets:
- C13 and C19 standard outlets are equipped with cord locking system to avoid any accidental disconnection. Universal solution compatible with all
the cords (C14 plugs for C13 and C20 plugs for C19).
- French, German and British standard outlets are equipped with blanks
- French and German standard outlets are inclined at 55°
Black modules (outlets and functions)
Pack Cat.Nos 19” - PDU with protection devices Pack Cat.Nos 19” - PDU with ammeter
MCB and RCBO support with projecting edges to Measure consumption to provide better installation
avoid accidental breakdown management: balancing circuits, displaying
3 m power supply cord with 16 A 2P+E French/ available capacity, preventing overloads and power
German plug failures
German standard Measure total PDU current
1
Rotating display to ensure a perfect reading
6 468 31 6 outlets and a 16 A single pole Micro Circuit Breaker whatever the PDU mounting direction is (horizontal,
1 6 468 32 9 outlets and a 16 A single pole Micro Circuit Breaker, vertical with top or bottom power supply input)
2U height
German standard
French standard 3 m power supply cord with 16 A 2P+E French/
1 6 468 30 6 outlets and a 16 A single pole Micro Circuit Breaker German plug
1 6 468 33 6 outlets and a 16 A 30 mA Residual-current Circuit 1 6 468 41 6 outlets
19” - PDU with surge protection French standard
3 m power supply cord with 2P+E French/German plug
Protect against mains overvoltages while keeping 1 6 468 40 6 outlets
outlets energised
With light indicators: Italian standard
- one LED (white) gives information whether the PDU 1 6 468 42 6 outlets
is supplied with power or not IEC 60320 standard
- one LED (green) indicates when surge protection
module is efficient or must be replaced With integrated universal plug locking system
Equipped with hotswappable surge protection Connection on terminal block
module Cat.No 6 468 97: even when the module 1 6 468 43 6 C13 outlets with cord locking system
is being replaced, the PDU and its outlets are still 1 6 468 45 6 C13 outlets + 1 C19 outlet with cord locking system
powered on 1 6 468 44 6 C19 outlets with cord locking system
With switch
3 m power supply cord with 16 A 2P+E French/
German plug
1 6 468 36 6 outlets - German standard
1 6 468 35 6 outlets - French standard
772
Legrand cabling system LCS³ Energy TRAINING
Distribution - metered Power Distribution Units
Level UP
with legrand
Discover a new distance training service
in 2018, and boost your teams’ knowledge.
6 460 12
Power distribution units with metering at inlet level and circuit breaker level
Possibility of environmental monitoring through one of the optional external
sensors (temperature, humidity...)
A VARIED OFFER
Available in several different formats (exercises,
videos, quizzes, etc), Legrand distance training
courses are very varied in content: the basics of
electricity, standards and regulations, innovative new
products, protection, power compensation, home
automation, VDI, UPS, etc.
773
Legrand cabling system LCS³ Energy Distribution
PDUs
774
Legrand cabling system LCS³
Q Performance table
SIZES OF COMPONENTS LINK SIZES (CHANNEL)
Cat. 8 STP Cat. 6A STP Cat. 6 UTP Cat. 6 FTP Class I Class EA Class E
Supported network
protocol 2000 MHz 500 MHz 250 MHz 250 MHz 2000 MHz 500 MHz 250 MHz 250 MHz
40 Giga 10 Giga 1 Giga 1 Giga 40 Giga 10 Giga 1 Giga 1 Giga
Return loss (dB) LCS3 17.05 26.59 29.8 16.4 22.1 38.8
Resistance 1.2 8
to echo ISO 11801 edition 3 14 min 20 min 16 min 8 min 10 min 10 min
Q Compliance with LCS³ system standards and approvals Max. cable length 30 m 100 m variable 100 m variable 100 m
137,1
352 166
775
Legrand cabling system LCS³ (continued)
Q Euroclass classification
Cat.Nos Description Euroclass (Aca; B1ca; B2ca; Cca; Dca; Eca; Fca) Additional criteria (smoke production, flaming droplets, acidity)
0 327 50 CABLE C5e U/UTP 4P LSZH Dca s2 d2 a1
0 327 51 CABLE C5e U/UTP 4P PVC Eca - - -
0 327 52 CABLE C5e F/UTP 4P LSZH Dca s2 d2 a1
0 327 53 CABLE C5e F/UTP 4P PVC Eca - - -
0 327 54 CABLE C6 U/UTP 4P LSZH Dca s2 d2 a1
0 327 55 CABLEC6 U/UTP 4P PVC Eca - - -
0 327 56 CABLE C6 F/UTP 4P LSZH Dca s2 d2 a1
0 327 58 CABLE C6 F/UTP 4P PVC Eca - - -
0 327 59 CABLE C6 SF/UTP 4P PVC Eca - - -
0 327 76 CABLE C6 F/UTP 2x4P LSZH Dca s2 d2 a1
0 327 77 CABLE C7 S/FTP 4P LSZH Dca s2 d1 a1
0 327 78 CABLE C6A F/UTP 4P LSZH Dca s2 d2 a1
0 327 88 CABLE Grade2 F/UTP 4P LSZH Dca s2 d2 a2
0 327 89 CABLE Grade3 F/FTP 4P LSZH Dca s2 d2 a2
0 327 98 CABLE C6A F/FTP 2X4P LSZH Dca s2 d2 a1
0 327 99 CABLE C6A F/FTP 4P LSZH Dca s2 d2 a1
0 328 50 CABLE C5e F/UTP 4P LSZH Dca s2 d2 a1
0 328 53 CABLE C5e U/UTP 4P LSZH Dca s2 d2 a1
0 328 56 CABLE C6 F/UTP 4P LSZH Dca s2 d2 a1
0 328 61 CABLE C6 U/UTP 4P LSZH Dca s2 d2 a1
0 328 78 CABLE C6A F/UTP 2X4P LSZH Dca s2 d2 a2
0 337 88 CABLE C8 S/FTP 4P LSZH Dca s2 d2 a1
0 328 57 CABLE C6 F/UTP 4P PVC Eca - - -
0 328 88 CABLE C3 U/UTP 100P LSZH Eca - - -
0 328 91 CABLE C3 U/UTP 50P LSZH Eca - - -
0 328 82 CABLE C7 S/FTP 4P LSZH B2ca s1 d1 a1
0 328 83 CABLE C6A F/FTP 4P LSZH Cca s1 d1 a1
0 327 79 CABLE C7 S/FTP 2X4P LSZH Dca s2 d1 a1
0 328 84 CABLE C6A U/FTP 4P LSZH Cca s1 d1 a1
0 328 85 CABLE C6A U/FTP 2X4P LSZH Cca s1 d1 a1
776
Legrand cabling system LCS³ fibre optic
Q Maximum length of a channel with the use of fibre optic 0 325 47 Not applicable - - -
850/1300 nm 0 325 48 Not applicable - - -
(MHz/km)
0 326 65 Dca s2 d2 a1
bandwidth
0 326 66 Dca s2 d2 a1
0 326 67 Dca s2 d2 a1
0 326 68 Dca s2 d2 a1
3500 / 5000
OS1/OS2
2
Euroclass Classification Additional criteria AV CP system
1500 / 500 criterai
OM4 Non combustible EN ISO 1716 "1+" including:
500 / 500 (e.g. mineral Aca Gross heat of - - initial type-testing
550 insulated) combustion and continuous
OM3 surveillance
B1ca Smoke production - audit and testing
(s1a, s1b, s2, s3) of samples by 3rd
OM2 B2ca EN50399/EN61034- party certification
EN 50399 2 body
Low-Fire-Hazard Heat release Factory production
cables (various Cca Flame spread Acidity control by
levels) (a1, a2, a3) manufacturer
EN 60332-1-2 EN 50267-2-3
Flame propagation "3" including:
Flaming droplets - initial type-testing
Dca (d0, d1, d2) by 3rd party
EN 50399 laboratory
Protocols Multimodes Singlemode Factory production
(max. length) Standard cables Eca EN 60332-1-2 - control by
OM2 OM3 OM4 OS1/OS2 Flame propagation manufacturer
10 Gigabit Ethernet 82 m 300 m 550 m(1) NA "4":
(base S/R) initial type-testing
No performance "EN 60332-1-2
determined Fca Flame propagation - and factory
Giga Ethernet production control
(base LX) 550 m 550 m 550 m 2 km
by manufacturer
Giga Ethernet 550 m 550 m 1100 m NA
(base SX)
TIA 568
IEEE 802.3 applications
1: Technical solution using a fibre optic cable with maximum attenuation 3 dB/km and a wave
length of 850 nm
777
Legrand cabling system LCS³
■ PoE architecture
Building systems are moving to a single IP Network
PoE switch
A Power over Ethernet switch is a device which
Power supply supplies power and data on Ethernet cabling. It will
draw power from its own conventional power source
and provide power to the rest of the PoE system
Data
Ethernet cabling
The Ethernet cable is the power and data
transmission medium of a PoE system. It is used to
provide the link between two devices enabling
bi-directional communication and uni-directional
supply of power
Data + Power (Up to 100 m)
RJ 45 sockets
Universal RJ 45 socket to
connect devices
Powered devices
A powered device is a
device which receives
power from the power
sourcing equipment. It
does not require its own
Wireless access Security camera IP phone Intelligent Sensors (light, IoT Gateway Building automation HVAC conventional power
point LED lighting climate, CO2, ...) source
778
Energy distribution
19" 1U PDU mounting
■ Horizontal mounting in Legrand 19" cabinets ■ Vertical mounting in freestanding cabinets with support
Can be mounted in all Legrand 19" cabinets except for 19" HD racks
which require the use of equipment screws Cat.No 0 464 23
Quick fixing
779
Energy distribution
Zero-U PDU
AMP
AMP
AMP
AMP
3m
3m
AMP
3m 3m 3m
3m
3m
780
Energy distribution
Zero-U PDU mounting in LCS3 cabinets
781
Linkeo 19" freestanding cabinets
cabinets and equipment
782
Linkeo 19" freestanding cabinets Linkeo 19” freestanding cabinets
cabinets and equipment (continued)
QFlatpack solution
Easy to carry
Easy to store
Easy to handle
6 465 01 Easy to mount:
- 16 minutes / 1 person
- dedicated installation sheet
Doors
- screen-printed glass
- microperforated
metal
- solid metal
in single or double
version
783