Professional Documents
Culture Documents
ENGLISH
ORION warrants this product to be free from manufacturing defects in material and workmanship under normal use
OWNER’S
MANUAL
and conditions for a period of 12 month from date of original purchase in the United States.
Should service be necessary under this warranty for any reason due to a manufacturing defect or malfunction R
during the first 12 month from date of original purchase, ORION will provide carry-in repair service by an ORION
DTV1900
replace the defective part provided the defect or malfunction is verified along with dated proof of purchase.
There are ORION authorized Independent Service Centers located throughout the country. For the one nearest
you, DIAL TOLL FREE: 1-800-289-0980 or visit our website at www.orionsalesinc.com. This product is eligible for CARRY-
IN service only. ORION will not be liable for damages incurred in shipment of the unit. If there are no ORION authorized CAUTION
Independent Service Centers in your area please call – 1-888-296-7466 for assistance. Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void
the user's authority to operate this equipment.
Note: This warranty is void if the product is:
(a) Damaged through negligence, misuse, abuse, or accident.
(b) Used in a commercial application or rentals. ATTENTION
(c) Modified or repaired by anyone other than an Independent Service Center authorized by ORION to effect warranty If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the
repairs to the class of product or by the ORION Factory Service Center. required programming code.
(d) Damaged because it is improperly connected to the equipment of other manufacturers.
This warranty does not cover:
(a) Damage to equipment not properly connected to the product. TV/CATV MODE SELECTION
(b) Costs incurred in the shipping of the product to an ORION authorized Independent Service Center or ORION When shipped from the factory, the TV/CATV menu option is set to the “CATV” (Cable Television) mode. If not using
CATV, set this menu option to “TV” mode.
Factory Service Center.
(c) Damage or improper operation of unit caused by customer abuse, misuse, negligence, or failure to follow operating
instructions provided with the product.
(d) Ordinary adjustments to the product which can be performed by customer as outlined in the owner’s manual. If CONTACT WITH CUSTOMER SERVICE IS REQUIRED
(e) Signal reception problems caused by external antenna or cable systems. PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL
CUSTOMER SERVICE– 1-800-289-0980
THIS WARRANTY IS NON TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER AND DOES NOT
EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. ANY APPLICABLE IMPLIED WARRANTIES, INCLUDING ORION WEBSITE
THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD OF THE EXPRESS WARRANTY FOR INFORMATION ON OUR OTHER PRODUCTS,
AS PROVIDED HEREIN BEGINNING WITH THE DATE OF ORIGINAL PURCHASE AT RETAIL AND NO WARRANTIES, PLEASE VISIT OUR WEBSITE AT
WHETHER EXPRESS OR IMPLIED SHALL APPLY TO THIS PRODUCT THEREAFTER. ORION MAKES NO WARRANTY www.orionsalesinc.com
AS TO THE FITNESS OF THE PRODUCT FOR ANY PARTICULAR PURPOSE AND USE.
FEATURES
UNDER NO CIRCUMSTANCES SHALL ORION BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE USE OF THIS
PRODUCT. Integrated Digital Tuner - You can view digital broadcasting without using a Digital TV Set-Top Box.
THIS WARRANTY IS VALID ONLY IN THE UNITED STATES OF AMERICA. THIS WARRANTY GIVES YOU SPECIFIC On-Screen 3 Language Display - This TV can display the on screen language in English, Spanish or
LEGAL RIGHTS, HOWEVER, YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE. SOME
STATES DO NOT ALLOW LIMITATION ON IMPLIED WARRANTIES OR EXCLUSION OF CONSEQUENTIAL DAMAGE,
French.
THEREFORE THESE RESTRICTIONS MAY NOT APPLY TO YOU. Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote
control adjustment of BRIGHTNESS, COLOR, CONTRAST, SHARPNESS and TINT.
ORION SALES, INC. Sleep Timer - Operable from the remote control, this TV can be programmed up to 120 minutes to turn
3471 N. UNION DR. off automatically.
OLNEY, ILLINOIS 62450
Memory Back Up - This system prevents loss of memorized channel selections in case a power
interruption to the TV should occur.
Closed Captioned Decoder - Displays text captions or 1/2 of full screen text on the screen for hearing
impaired viewers.
V-Chip - The V-Chip function can read the rating of a TV program or movie content if the program is
encoded with this information. The V-Chip will allow you to set a restriction level.
POWER SOURCE
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on AC. Insert the AC cord plug into a standard 120V
60Hz polarized AC outlet.
AC outlet NOTES: 12 3 4 5 6
Wider Hole 1. Never connect the AC line cord plug to other than 23 4 5 6
and Blade the specified voltage (120V 60Hz). 1. EARPHONE Jack - Plug an earphone or monaural headphones with an 1/8" miniplug into this jack for
Use the attached power cord only. private listening.
2. If the polarized AC cord does not fit into a non- 2. Remote Sensor - Signals from the Remote Control unit are received here.
polarized AC outlet, do not attempt to file or cut the 3. Power Button - Press to turn the TV on or off.
blade. It is the user’s responsibility to have an 4. Volume ▲ / ▼ Buttons - Press to raise or lower the level of the sound.
electrician replace the obsolete outlet. (Menu Buttons) - Press both VOLUME ▲ / ▼ buttons at the same time to display the On-Screen menu
3. If you cause a static discharge when touching the functions.
unit, and the unit fails to function, simply unplug the (Set + / – Buttons) - Press to select the desired setting during On-Screen operations.
unit from the AC outlet, wait a few minutes, and 5. Channel ▲ / ▼ Buttons - Press to select a higher or lower numbered channel set into memory.
plug it back in. The unit should return to normal (Enter Button) - Press to enter or select information for On-Screen operations.
Polarized AC Cord Plug operation. (Reset Button) - Press, while in the On-Screen menu mode, to reset the On-Screen picture adjustments to
(One blade is wider than the other) their factory preset positions.
Downloaded from www.Manualslib.com manuals search engine 6. Audio/Video In Jacks - Audio and video signal cables from an external source can be connected here.
The lightning flash with arrowhead symbol, within an equilateral 4. SLEEP Button - To set the TV to turn off after a
triangle is intended to alert the user to the presence of preset amount of time, press the SLEEP button.
uninsulated dangerous voltage within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of The clock will count down 10 minutes each time
electric shock. the button is pressed in the order of 120, 110,
100, ...... 20, 10, 0. After the sleep time is
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER The exclamation point within an equilateral triangle is intended programmed, the display will disappear then
(OR BACK). NO USER-SERVICEABLE to alert the user to the presence of important operating and reappear momentarily every ten minutes to
PARTS INSIDE. REFER SERVICING maintenance (servicing) instructions in the literature remind you the sleep timer function is operating.
TO QUALIFIED SERVICE PERSONNEL. accompanying the appliance.
To confirm the sleep time setting, press the
SLEEP button once and the remaining time will
be momentarily displayed. To cancel sleep time,
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
press the SLEEP button repeatedly until the
MOISTURE.
display turns to 0.
5. VOL (VOLUME) + / - Buttons - Press the +
button to increase, or the - button to decrease the
TV OPERATION
walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs, EXAMPLE OF ANTENNA GROUNDING AS
convenience receptacles, and the point where they PER NATIONAL ELECTRICAL CODE
exit from the appliance.
13. LIGHTNING - To protect your unit during a lightning
1 To turn on the TV, press POWER button.
storm, or when it is left unattended and unused for
2
ANTENNA LEAD IN WIRE
The VOLUME can be adjusted to a desired level by pressing the VOL (VOLUME) − or + .
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will GROUND CLAMP ANTENNA
prevent damage to the unit due to lightning and power DISCHARGE UNIT The sound level will be indicated on the TV screen by GREEN BARS AND A NUMBER. As the sound
line surges.
(NEC SECTION 810-20)
level increases, so do the number of BARS AND THE NUMBER on the screen. The same is true for
ELECTRIC
14. POWER LINES - An outside antenna system shoul not SERVICE
GROUNDING CONDUCTORS
decreasing the level.
be located in the vicinity of overhead power lines, or EQUIPMENT
(NEC SECTION 810-21)
other electric light or power circuits, or where it can fall
into such power lines or circuits. When installing an
GROUND CLAMPS
3 Set the TV/CATV menu option to the appropriate position. When shipped from the factory, this menu
POWER SERVICE GROUNDING option is in the CATV setting. See “TO MEMORIZE CHANNELS”.
outside antenna system, extreme care should be taken ELECTRODE SYSTEM
(NEC ART 250, PART H)
to keep from touching such power lines or circuits as
contact with them might be fatal. NEC-NATIONAL ELECTRICAL CODE TV - VHF/UHF channels
S2898A CATV - CABLE TV channels
4 CH (CHANNEL) and
REMOTE CONTROL Press and release CH (CHANNEL) or . The channel automatically stops at the next channel set
into memory. Press and hold the button down to change channels more quickly.
Before using the remote control transmitter, batteries must first be installed.
For proper operation, before selecting channels, they should be set into the TV’s memory.
HOW TO INSTALL BATTERIES See “TO MEMORIZE CHANNELS”.
1. Open the battery compartment cover. Use two “AAA” size penlight batteries (supplied) or the
transmitter.The batteries may last approximately one year DIRECT CHANNEL SELECTION buttons (0-9)
depending on how much the remote control is used. For Press these buttons to select a channel. The channel number will appear on the upper right corner of
best performance, it is recommended that batteries should the TV screen. If an invalid channel number is selected, the display will revert to the previous channel.
be replaced on a yearly basis, or when the remote operation
becomes erratic. Do not mix old and new batteries or TV MODE DIRECT CHANNEL SELECTION
different types. When the TV/CATV menu option is in the TV position, all channels can be instantly selected by using two
buttons (For example, to select channel 2, press “0”, then “2”. If you press only “2”, channel selection will
BATTERY PRECAUTIONS be delayed for a few seconds). For channels 10 and above, press the 2 digits in order.
These precautions should be followed when using batteries
in this device: ANALOG CHANNEL SELECTION
When the TV/CATV menu option is in the CATV position, channels can be selected as follows:
2. Install two “AAA” (penlight size) batteries. 1. Use only the size and type of batteries specified.
1-9 Press “0” twice, then 1-9 as needed.
2. Be sure to follow the correct polarity when installing
Example, to select channel 2, press “002”.
the batteries as indicated in the battery compartment.
10-12 Press “0”, then remaining 2 digits.
Reversed batteries may cause damage to the device.
Example, to select channel 12, press “012”.
3. Do not mix different types of batteries together (e.g.
13-99 Press the 2 digits in order.
Alkaline and Carbon-zinc) or old batteries with fresh
Example, to select channel 36, press “36”.
ones.
100-125 Press the 3 digits in order.
4. If the device is not to be used for a long period of time,
Example, to select channel 120, press “120”.
remove the batteries to prevent damage or injury from
possible battery leakage. DIGITAL CHANNEL SELECTION
5. Do not try to recharge batteries not intended to be Press the first 3 digits, then press “–/DISPLAY”, followed by the remaining 3 digits.
recharged; they can overheat and rupture. Example, to select channel 015-001, press 015 – 001.
3. Replace the battery compartment cover. (Follow battery manufacturer’s directions.)
• If a channel is selected with only audio content, “AUDIO ONLY” will be displayed on the screen.
• If a channel is selected with a weak digital signal, “DIGITAL CHANNEL SIGNAL STRENGTH IS LOW”
will be displayed on the screen.
• If a channel is selected to which you have not subscribed, “DIGITAL CHANNEL IS SCRAMBLED” will
be displayed on the screen.
NOTE: It may take a few seconds for a digital channel picture to appear on screen after being selected.
Downloaded from www.Manualslib.com manuals search engine
CLOSED CAPTION AUDIO LANGUAGE (DIGITAL MODE)
WHAT IS CLOSED CAPTIONING? 1 Press MENU/ENTER in the digital mode.
This television has the capability to decode and display Closed Captioned television programs. Closed
Captioning will display text on the screen for hearing impaired viewers or it will translate and display text in
another language.
2 Press or to select DIGITAL SETUP, then press .
1 Press MENU/ENTER in the analog mode. 5 Press or to select V-CHIP SET, then press .
4 Press EXIT to return to the normal screen. TV-Y : all children TV-PG : parental guidance
TV-Y7 : 7 years old and above TV-14 : 14 years old and above
TV-G : children’s program TV-MA : 17 years old and above
TO VIEW CLOSED CAPTIONS (DIGITAL MODE)
When you select TV-Y7, TV-PG, TV-14 or TV-MA, press DISPLAY to explain the rating.
1 Press MENU/ENTER in the digital mode. Press or to select the desired rating you want. Press or to select the setting ON or OFF.
5 Press or to select the desired Closed Caption mode, 9 Press MENU/ENTER twice to return to the V-CHIP menu, then press or to select V-CHIP.
then press MENU/ENTER.
You can select the display method of Closed Caption with AUTO designated by broadcasting studios or CUSTOM.
TO MEMORIZE CHANNELS
1 Press MENU/ENTER in the digital mode.
This TV is equipped with a channel memory feature which allows channels to skip up or down to the next
2 Press or to select DIGITAL SETUP, then press . channel set into memory, skipping over unwanted channels.
Before selecting channels, they must be programmed into the TV’s memory. To use this TV with an antenna,
3 When DIGITAL SETUP menu appears, press or to select CC SETTING and press . set the TV/CATV menu option to the TV setting. When shipped from the factory, this menu option is in the
CATV setting.
4 You can choose from AUTO, SMALL, LARGE, CUSTOM, and press MENU/ENTER.
TV/CATV SELECTION
5 Press MENU/ENTER to return to the normal screen.
1 Press MENU/ENTER.
1 Press MENU/ENTER in the digital mode. 4 Press or to select the TV or CABLE mode. The arrow indicates the
selected mode.
2 Press or to select DIGITAL SETUP, then press .
5 Press EXIT to return to the normal screen.
3 When DIGITAL SETUP menu appears, press or to select CC ADVANCED and press .
4 Press or to select the item you want to adjust, then press . The chart below is typical of many cable system channel allocations.
You can select from among the following items and parameters.
NOTE:
Do not set the Closed Caption “TEXT COLOR” and “BACKGROUND COLOR” as the same color or you will not NOTE:
be able to see the text. Contact your cable company to determine the type of cable system used in your area.
Press or to select “ADD” or “DELETE”, whichever function you want to perform. (not supplied)
5 Repeat steps 4 for other channels you wish to add or delete, then press MENU/ENTER.
TROUBLESHOOTING GUIDE
6 Press EXIT to return to the normal screen.
Before requesting service, please refer to the following chart for the symptom and possible solution.
TO ADD/DELETE CHANNELS (DIGITAL MODE)
SYMPTOMS POSSIBLE SOLUTIONS
1 Press MENU/ENTER in the digital mode. • Make sure the power cord is plugged in.
• Try another AC outlet.
TV does not operate. • Power is off, check fuse or circuit breaker.
2 Press or to select DIGITAL SETUP, then press . • Unplug unit for an hour, then plug it back in.
• Station or CATV experiencing problems, tune to another station.
3 When DIGITAL SETUP menu appears, press or to select ADD/DELETE Poor sound or no sound. • Check sound adjustments (Volume and Mute).
• Check for sources of possible interference.
and press .
• Station or CATV experiencing problems, tune to another station.
• Make sure channels are set into memory.
4 Press or to select ADD/DELETE, then press . Poor picture or no picture. • Check antenna or CATV connections, adjust antenna.
• Check for sources of possible interference.
5 Select the desired channel to be memorized or deleted using or . • Check picture control adjustments.
• Station or CATV experiencing problems, tune to another station.
Press or select “ADD” or “DELETE”, whichever function you want to perform. Poor reception on some • Make sure channels are set into memory.
channels. • Station is weak, adjust antenna to receive desired station.
6 Repeat step 4 for other channels you wish to add or delete, then press MENU/ENTER. • Check for sources of possible interference.
• Station or CATV experiencing problems, tune to another station.
7 Press MENU/ENTER until the menu screen is cleared. Poor color or no color.
• Make sure channels are set into memory.
• Check picture control adjustments.
• Check antenna or CATV connections, adjust antenna.
• Check for sources of possible interference.
TO ADD A DIGITAL CHANNEL • Station or CATV experiencing problems, tune to another station.
Select the channel you want to add. Press or to select “ADDING CHANNEL” as in step 4 above, then Picture wobbles or drifts. • Make sure channels are set into memory.
• CATV company is scrambling signal.
press . • Adjust antenna.
Digital broadcasting screen
problem. • Check antenna, adjust antenna.