Professional Documents
Culture Documents
1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
CCNA5.NET HOME CCNA 200-120 CCNA v5.0 CCNA Security IT-Essentials Courses Sign In
HELP TO UP
Encontranos no Facebook
CCNA v5 Final Exams
Gosto
13.618 pessoas gostam de CCNA v5 Final Exams
Refer to the exhibit. What is the maximum TIL value that is used to reach the destination
www.cisco.com?
11
12
13*
14 Plugin social do Facebook
2.
Which IPv4 address can be pinged to test the internal TCP/IP operation of a host?
192.168.1.1
CCNA v5.0 Exam Answers PDF
0.0.0.0
0.0.1
255.255.255.255 CCNA 1 v5.0 – PDF
127.0.0.1*
CCNA 2 v5.0 – PDF
3.
A host is accessing a Telnet server on a remote network. Which three functions are performed by CCNA 3 v5.0 – PDF
intermediary network devices during this conversation? (Choose three.)
CCNA 4 v5.0 – PDF
regenerating data signals*
acting as a client or a server
providing a channel over which messages travel
applying security settings to control the ftow of data*
notifying other devices when errors occur*
Search
serving as the source or destination of the messages
4.
Which statement is true about DHCP operation? Categories
When a device that is configured to use DHCP boots, the client broadcasts a DHCPDISCOVER message
to identify any available DHCP servers on the networK.* CCNA 1 v5.0 Routing and Switching
A client must wait for lease expiration before it sends another DHCPREOUEST message.
CCNA 2 v5.0 Routing and Switching
The DHCPDISCOVER message contains the IP address and sub net masK to be assigned, the IP address of
the DNS server, and the IP address of the default gateway.
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 1/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
If the client receives several DHCPOFFER messages from different servers, it sends a unicast CCNA 200-120 Questions
DHCPREOUEST message to the server from which it chooses to obtain the IP information.
CCNA 200-120 Simulation
5.
Which type of wireless security is easily compromised? CCNA 3 v5.0 Routing and Switching
EAP
CCNA 4 v5.0 Routing and Switching
PSK
WEP*
CCNA Security v1.2
WPA
7. Uncategorized
Which protocol supports rapid delivery of streaming media?
9.
Which group of IPv6 addresses cannot be allocated as a host source address?
FECO::/10
FEBF::/10
FF00::/8*
FDFF::/7
10.
A host PC is attempting to lease an address through DHCP. What message is sent by the server to the
client know it is able to use the provided IP information?
DHCPDISCOVER
DHCPOFFER*
DHCPPREQUEST
DHCPACK
DHCPNACK
CCNA 1 v5.0 R&S ITN Final Exam 2014
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 2/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
When the router prompts for an address or remote host name, what IP address
should the administrator enter at the prompt?
192.168.9.254
192.168.10.1
192.168.10.2
192.168.11.254
192.168.11.252
2 Which three statements characterize the transport layer protocols? (Choose three.)
TCP uses port numbers to provide reliable transportation of IP packets.
TCP and UDP port numbers are used by application layer protocols.
4 A technician uses the ping 127.0.0.1 command. What is the technician testing?
connectivity between a PC and the default gateway
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 3/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
5 What will a Layer 2 switch do when the destination MAC address of a received frame
is not in the MAC table?
It forwards the frame out of all ports except for the port at which the frame was received.
It provides delimitation of data according to the physical signaling requirements of the medium.
7
On which switch interface would an administrator configure an IP address so that the
switch can be managed remotely?
VLAN 1
console 0
vty 0
FastEthernet0/1
8
A network engineer is measuring the transfer of bits across the company backbone
for a mission critical database application. The engineer notices that the network
throughput appears lower than the bandwidth expected. Which three factors could
influence the differences in throughput? (Choose three.)
the latency that is created by the number of network devices that the data is crossing
9
When applied to a router, which command would help mitigate brute-force password
attacks against the router?
service password-encryption
exec-timeout 30
10
Which two statements correctly describe a router memory type and its contents?
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 4/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
(Choose two.)
11
Which two components are necessary for a wireless client to be installed on a WLAN?
(Choose two.)
custom adapter
wireless bridge
media
wireless NIC
crossover cable
Open the PT activity. Perform the tasks in the activity instructions and then fill in the
blank.
13
A host is accessing a Web server on a remote network. Which three functions are
performed by intermediary network devices during this conversation? (Choose
three.)
applying security settings to control the flow of data
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 5/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
serving as the source or destination of the messages
14
15
16
Which address on a PC does not change, even if the PC is moved to a different
network?
IP address
logical address
MAC address
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 6/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
17
What will happen if the default gateway address is incorrectly configured on a host?
The host will have to use ARP to determine the correct address of the default gateway.
The host cannot communicate with other hosts in the local network.
18
A host PC has just booted and is attempting to lease an address through DHCP. Which
two messages will the client typically broadcast on the network? (Choose two.)
DHCPREQUEST
DHCPOFFER
DHCPDISCOVER
DHCPNACK
DHCPACK
19
Refer to the exhibit. An administrator wants to change the name of a brand new
switch, using the hostname command as shown. What prompt will display after the
command is issued?
Switch#
My(config)#
My Switch(config)#
Switch(config)#
MySwitch(config)#
20
After making configuration changes, a network administrator issues a copy running-
config startup-config command in a Cisco switch. What is the result of issuing this
command?
The configuration changes will be removed and the original configuration will be restored.
The current IOS file will be replaced with the newly configured file.
21
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 7/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
Refer to the exhibit.A TCP segment from a server has been captured by Wireshark,
which is running on a host. What acknowledgement number will the host return for
the TCP segment that has been received?
2921
250
306
21
22
Which technology provides a solution to IPv4 address depletion by allowing multiple
devices to share one public IP address?
ARP
DNS
SMB
DHCP
HTTP
NAT
to select the paths that are used to direct traffic to destination networks
24 Three bank employees are using the corporate network. The first employee uses a
web browser to view a company web page in order to read some announcements. The
second employee accesses the corporate database to perform some financial
transactions. The third employee participates in an important live audio conference
with other corporate managers in branch offices. If QoS is implemented on this
network, what will be the priorities from highest to lowest of the different data types?
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 8/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
financial transactions, web page, audio conference
25
A home user is looking for an ISP connection that provides high speed digital
transmission over regular phone lines. What ISP connection type should be used?
cell modem
dial-up
cable modem
satellite
DSL
26
Which connection provides a secure CLI session with encryption to a Cisco switch?
a Telnet connection
an SSH connection
a console connection
an AUX connection
28
linevtyin
letmein
secretin
29
Which publicly available resources describe protocols, processes, and technologies
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 9/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
IEEE standards
protocol models
31 Which subnet would include the address 192.168.1.96 as a usable host address?
192.168.1.64/26
192.168.1.32/28
192.168.1.32/27
192.168.1.64/29
32
A particular website does not appear to be responding on a Windows 7 computer.
What command could the technician use to show any cached DNS entries for this web
page?
ipconfig /all
ipconfig /displaydns
arp -a
nslookup
33 Which type of wireless security generates dynamic encryption keys each time a
client associates with an AP?
WPA
PSK
WEP
EAP
34
A frame is transmitted from one networking device to another. Why does the
receiving device check the FCS field in the frame?
to compare the interface media type between the sending and receiving ends
to verify that the frame destination matches the MAC address of the receiving device
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 10/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
to verify the network layer protocol information
35
Site 3
Site 4
Site 2
36
What is the effect of configuring the ipv6 unicast-routing command on a router?
to assign the router to the all-nodes multicast group
37
Which three IP addresses are private ? (Choose three.)
10.1.1.1
172.16.4.4
224.6.6.6
192.168.5.5
172.32.5.2
192.167.10.10
38
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 11/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
Refer to the exhibit. Consider the IP address configuration shown from PC1. What is a
description of the default gateway address?
It is the IP address of the Router1 interface that connects the company to the Internet.
It is the IP address of Switch1 that connects PC1 to other devices on the same LAN.
It is the IP address of the Router1 interface that connects the PC1 LAN to Router1.
39 During normal operation, from which location do most Cisco switches and routers
run the IOS?
flash
RAM
NVRAM
disk drive
40
What is an important function of the physical layer of the OSI model?
41
Which procedure is used to reduce the effect of crosstalk in copper cables?
wrapping the bundle of wires with metallic shielding
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 12/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
42
What are the three primary functions provided by Layer 2 data encapsulation?
(Choose three.)
placement and removal of frames from the media
43
What method is used to manage contention-based access on a wireless network?
token passing
CSMA/CD
CSMA/CA
priority ordering
44
What happens when part of an Internet radio transmission is not delivered to the
destination?
45
What is the auto-MDIX feature on a switch?
the automatic configuration of full-duplex operation over a single Ethernet copper or optical cable
the ability to turn a switch interface on or off accordingly if an active connection is detected
46
Which function is provided by TCP?
detection of missing packets
data encapsulation
47
How does a Layer 3 switch differ from a Layer 2 switch?
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 13/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
A Layer 3 switch learns the MAC addresses that are associated with each of its ports. However, a Layer 2
switch does not.
An IP address can be assigned to a physical port of a Layer 3 switch. However, this is not supported in
Layer 2 switches.
48
Which two notations are useable nibble boundaries when subnetting in IPv6? (Choose
two.)
/68
/62
/66
/64
/70
49
What is the purpose of having a converged network?
to reduce the cost of deploying and maintaining the communication infrastructure
to make sure that all types of data packets will be treated equally
to achieve fault tolerance and high availability of data network infrastructure devices
50
Refer to the exhibit. A ping to PC3 is issued from PC0, PC1, and PC2 in this exact order.
Which MAC addresses will be contained in the S1 MAC address table that is associated
with the Fa0/1 port?
51
Which field in an IPv4 packet header will typically stay the same during its
transmission?
Packet Length
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 14/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
Destination Address
Flag
Time-to-Live
52
What two preconfigured settings that affect security are found on most new wireless
routers? (Choose two.)
MAC filtering enabled
broadcast SSID
53
Which parameter does the router use to choose the path to the destination when
there are multiple routes available?
the higher metric value that is associated with the destination network
the lower metric value that is associated with the destination network
54
Refer to the exhibit. What is the significance of the asterisk (*) in the exhibited
output?
An asterisk designates that the file system has at least one file that uses that file system.
The asterisk designates which file system is the default file system.
The asterisk shows which file system was used to boot the system.
55
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 15/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
56
57
An administrator uses the Ctrl-Shift-6 key combination on a switch after issuing the
ping command. What is the purpose of using these keystrokes?
to interrupt the ping process
58
Refer to the exhibit. Which area would most likely be an extranet for the company
network that is shown?
area A
area D
area C
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 16/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
area B
59
60
61
In which default order will a router search for startup configuration information?
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 17/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
flash, ROM, setup mode
62
Open the PT Activity. Perform the tasks in the activity instructions and then answer
the question.
Which IPv6 address is assigned to the Serial0/0/0 interface on RT2?
2001:db8:abc:1::1
2001:db8:abc:5::1
2001:db8:abc:5::2
2001:db8:abc:10::15
63
What is contained in the trailer of a data-link frame?
physical address
data
error detection*
logical address
64
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 18/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
New Questions
1 What is the protocol that is used to discover a physical address from a known logical address and
what message type does it use?
-ARP, broadcast*
-FF00::/8 (multicast)*
3 A network administrator is configuring access control to switch SW1. If the administrator uses
console line to connect to the switch, which password is needed to access user EXEC mode?
-lineconin*
2 Which two statements describe the characteristics of fiber-optic cabling? (Choose two.)
Fiber-optic cabling uses LEDs for single-mode cables and laser technology for multimode cables.
Fiber-optic cabling does not conduct electricity.*
Fiber-optic cabling has high signal loss.
Fiber-optic cabling is primarily used as backbone cabling.*
Multimode fiber-optic cabling carries signals from multiple sending devices.
4 Which firewall technique blocks incoming packets unless they are responses to internal requests?
URL filtering
port filtering
application filtering
stateful packet inspection*
6 What three application layer protocols are part of the TCP/IP protocol suite? (Choose three.)
FTP*
ARP
NAT
DHCP*
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 19/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
PPP
DNS*
9 __________ is a best-effort, connectionless application layer protocol that is used to transfer files.
(TFTP*)
**************************************************************************
I can not give you the exact wording here, but I will give you the idea of what they were asking.
10
Can not connect to webpages, dns is ok. Issue is: Default Gateway.*
11
It will give 4 options about ping, the correct one is: The PC2 will be able to ping 192.168.1.1*
12
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 20/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
The question is from where is the system image being loaded. Answer: flash.*
13
It will ask what is the issue. Answer is: The user has to be in privileged EXEC mode to use that
command.*
global unicast
link-local*
site local
unique local
3 Which frame forwarding method receives the entire frame and performs a CRC check to detect errors
before forwarding the frame?
fragment-free switching
fast-forward switching
store-and-forward switching*
cut-through switching
112 November 13, 2013 by CCNA5.NET answers ccna ccna exam answers
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 21/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
Networks Final Exam
TFTP TFTP
Comments
please upload the rest of the exam chapters 9, 10 , 11 and final practise exam and thanks for
uploading these exam chapters, thanks to you, i have learned a lot …. i really appreciated for
the help. do you know what you are ? you are a star… send it to me on my email all ccna 1 v5
all of the exam chapters including final exams plus final praactise test and skills review test..
etc ( e-mai) ahmedomar_2007@yahoo.com
This page is great this is SO much help for people like me than don’t have much time for
study i really want to work in cisco and be a pro but I’m on an intensive course and I don’t
have much time to learn all the chapters and the practice too thank you so much, keep
working, you’re GREAT!!!
Thank you! I had my exam last week and I passed thanks to my studies. Used this to check
the questions that I failed on. Keep up the good work
It’ll be perfect if you also upload the Skill based asessment answer though
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 22/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
I can’t believe that and i don’t know how to thank you its really genius to make things easier
for the student like that. i get an encouragement to love CISCO YOU ABSOLUTELY BIGGER
THAN… thank YOU VERY MUCH.
Hi, i want to ask. Are these 64 questions all in final exam or will it be more?
Hi everybody!! I wanted to ask, if this is the latest final exams paper. Did someone take the
final exams recently? Were they the same questions? Please somebody answer me because
on Monday I will have my final exams.
Thank u!!
Hello thank you for the great work.. I was wondering if you can upload the commands for
the packet tracer lab for cisco1 routers and switches
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 23/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
S1
switch> enable
switch# configure terminal
switch(config)# hostname S1
S1(config)# banner motd “No unauthorized access allowed!”
S1(config)# service password-encryption
S1(config)# enable secret class12345
S1(config)# username admin secret danscourses
S1(config)# ip ssh version 2
S1(config)# ip domain-name danscourses.com
S1(config)# crypto key generate rsa modulus[512] 1024
S1(config)# interface vlan 1
S1(config-if)# ip address 192.168.4.126 255.255.255.192
S1(config-if)# no shut
S1(config-if)# exit
S1(config)# ip default-gateway 192.168.4.65
S1(config)# line con 0
S1(config-line)# exec-timeout 5 0
S1(config-line)# login local
S1(config-line)# line vty 0 4
S1(config-line)# exec-timeout 5 0
S1(config-line)# login local
S1(config-line)# transport input ssh>
S1(config-line)# line vty 5 15
S1(config-line)# exec-timeout 5 0
S1(config-line)# login local
S1(config-line)# transport input ssh
S1(config-line)# exit
S1(config-line)# copy run start
S2
switch> enable
switch# configure terminal
switch(config)# hostname S2
S2(config)# banner motd “No unauthorized access allowed!”
S2(config)# service password-encryption
S2(config)# enable secret class12345
S2(config)# username admin secret danscourses
S2(config)# ip ssh version 2
S2(config)# ip domain-name danscourses.com
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 24/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
hello. I will give exam for ccna 1. will be the same questions? thanks
I will give exam for ccna 1 tommorow.please answer me. the final exam is the same for all
the world? thanks
I will give exam for ccna 1 tommorow.please answer me. the final exam is the same for all
the world? thanks
Hello any one can help me is the Practical assessment is the same one in comment , because
i will take the exam tomorrow ??
can you please update all the 3 sets of ccna 1 version 5 exam and answers? As this is only
one set.
thanx
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 25/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
I’m taking exam next week are these the questions that will be in it? anyone taken the exam
recently??
Please reply
Can someone post the answers for the PT practice skills exam?! I really need your help. This
is my 2nd take already. I need to pass this subject ASAP! Thanks
i love you!!!
great work!!!
is it possible that you upload all 3 sets of ccna 1 version 5 exam and answers? As this time
there is only one set.
thanks
I had the test some days ago: The questions were mostly those that are posted here. Only 4-
6 questions were new.
had the test 2 days ago, same exact test except maybe 3-4 questions; The ip addresses
changed on the two questions that ask for sub netting.
90% of questions were the same, the IPs were not changed, there were only some extra
questions.
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 26/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
Just took this test today. There were a couple numbers different for a couple IP addresses for
the subnetting, and a couple questions not listed here. Still did very well. Thanks so much for
this!
Do you think it will change this week? I will have my exam on 3/20!!! Please help…
Hey Alex28183 how was the test? I will take the exam on 5/4, so I’m wondering if something
chaged.
Hello guys. I just had the exam today and it was a great success, only one question was
different from the ones posted here. This question was about the /8 class of IPv4 adresses,
you had to tell if they are public, private or reserved for experimental use.
Apart from that only the IPs for the subnetting questions were changed so you need to know
how to subnet if you want to do those too.
Many thanks to the creators of this website, may god bless you and all your wishes come
true.
Very kind thanks to who took time time to create this site, I am very fortunate for you taking
the time to help so many students like myself. Thank you very humbly and like some others
have said, god bless you friend!
I just want you guys to know that I took the exam yesterday and it was 100% the same as the
one posted here, no changes at all, not even on IP numbers, the Practice Skill exam was the
same as well, the only thing that changed was the name of the different areas, for example
the Town Hall was named CS department, but the structure was the same.
God bless the creators and you guys for letting us know about changes.
The practice exam I took today was NOT the same as the test here. All of them have been
100% exact but the pretest final was NOT still got a 89.6% but only one of the ?’s were on
there
did the exam today…about 3 questions were slightly altered and about 6 questions that
were not documented here.with some logical thinking and reasoning it’s still possible to
reach well over 90%
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 27/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
did the exam today…about 3 questions were slightly altered and about 6
questions that were not documented here.with some logical thinking and
reasoning it’s still possible to reach well over 90%
and the practice final exam ccna1 v5 2014 where i can find that?
Thanks
hi, am going to do the final exam tomorrow, will it be the same as this or it has changed?
I took this exam 2 days ago and got a 96.7%. About 4 questions weren’t on this website. A
few others were worded different, but I paid enough attention to the material to be able
answer them easily enough. Much appreciation for the authors of this website!
At the opposite of what many others said, there were no new questions or any changes from
what you can see on this web page.
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 28/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
I just took the exam and all questions were there, as expected. Thanks for your help!
I am taking my exam today! I will report back and let you all know if the questions are the
same.
passed final exam with 96%; from 62 final questions, 12 were different from the above
questions.
did the exam 2 days ago, only about 4 of the questions were different, some were slightly
modified but most were identical, i got 93%
brilliant thanks
MySwitch(config)#
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 29/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
Correction, its
My Switch(config)#
passed final exam with 89%; from 62 final questions, 10+were different from the above
questions.Thanks for sharing such a good PDF.
I can confirm to all of you that this answers are the same in the final test, I have taken my
exam last friday 26/09/2014 and the questions are a little bit different but the answers are
the same. I would like to send you some help (money) as a thanks for helped me to pass the
exam but I haven’t found any link to do it. Thanks again
I am taking the test as of today, in cisco acadamny aka netacad.com…. ill let everyone know
how it goes..
I’m taking the final exam in a couple of hours and hoping the questions are the same as
above!! as I haven’t studied much!! I will let you all know how it goes and to what extent the
questions are the same and if so how they differ.
Took the exam the other day and five of the questions were new and one was with the exact
same concept but with different numbers (#37) and another (#24) with a different scenario
but with the same type of importance.
Had my exam today and it was like 95% the same. some questions about ipv6 and trace
route (TTL) were “new”
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 30/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
it wasnt exactly the same…but it was still really great help. i passed with 88%…wishing u
guys good luck with ur exams
Guys, the exam is still valid but there were 10-15 different questions, some of the questions
were the same as in chapter exams. My Score on this final exam was 90 %, luckily I
remembered some stuff. P.S. the numbers for IP subnetting were different so you need to
know that really well.
Hi there. I wanted to ask, does the cisco networking academy monitor your web traffic when
you are taking these online exams? I heard that they will know which chapters of their own
you have open in your browser.. is this true? Also, for example, if i have ccna5.net open in
my browser, will they know this too? thanx in advance.
Hello there everyone.. I just took the final exam a couple of days ago.. So wanted to let
everyone know how it compared to this. I would say there was about 10-15 completely new
questions, and about 10 questions with different wording, but same answer. And some
other questions were changed so that the answer changed, like from console to telnet. (they
will give the same set of answers, but since the question have changed, so will the answer)
And it seems different students get a different set of questions, so the mate sitting next to
you will probably have another set. That’s all, tc now.
I had my exam today ,it was like 70% the same ,there were new questions like :
What are three characteristics of multicast transmission? (Choose three.)
global unicast
link-local
site local
unique local
Which frame forwarding method receives the entire frame and performs a CRC check to
detect errors before forwarding the frame?
fragment-free switching
fast-forward switching
store-and-forward switching
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 31/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
cut-through switching
and others ..
Hi there. I had my exam today, I managed to get some of the questions that did not
appeared here:
-A _________ topology influences the type of network framing and media access control that
will be used. (logical*)
-Which two statements describe the characteristics of fiber-optic cabling? (Choose two.)
Fiber-optic cabling uses LEDs for single-mode cables and laser technology for multimode
cables.
Fiber-optic cabling does not conduct electricity.
Fiber-optic cabling has high signal loss.
Fiber-optic cabling is primarily used as backbone cabling.
Multimode fiber-optic cabling carries signals from multiple sending devices.
-Which two protocols function at the internet layer? (Choose two.)
ARP
ICMP*
BOOTP
PPP
IP*
-Which firewall technique blocks incoming packets unless they are responses to internal
requests?
URL filtering
port filtering
application filtering
stateful packet inspection*
-Consider the following range of addresses:
2001:0DB8:BC15:00A0:0000::
2001:0DB8:BC15:00A1:0000::
2001:0DB8:BC15:00A2:0000::
…
2001:0DB8:BC15:00AF:0000::
The prefix-length for the range of addresses is ___. (/60*)
-What three application layer protocols are part of the TCP/IP protocol suite? (Choose three.)
FTP*
ARP
NAT
DHCP*
PPP
DNS*
-Which communication tool allows real-time collaboration?
weblog
wiki*
e-mail
instant messaging
-Which of the following are primary functions of a router? (Choose two.)
packet switching
microsegmentation
flow control*
path selection*
domain name resolution
-__________ is a best-effort, connectionless application layer protocol that is used to transfer
files. (UDP*)
The asterisks are were I believe the solutions are correct, if I am mistaken you are more than
welcome to correct me. Also, there are 4 questions more that did not appeared here but I
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 32/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
got the image of them, I will be sending them to the guy running this, I hope. Anyway, hope it
helps.
11
12
13*
14
Many Thank,
Almost the same as actual exam.
Took my exam today. This was absolutely sufficient. I got only about 7 questions that are not
listed here.
As far as I remember, there was a question about FTP (which ports are used on server and
client sides) and one about what happens when you press tab in the CLI (incomplete
command is completed).
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 33/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
I can’t remember the rest of the new questions, but they were not extremely difficult. GL
I am going to take my exam today. I hope this helps. Thanks in advance to everyone who
made this page possible and to those who provided updates. Good luck everyone.
CCNA5.net
Can you fix images at questions from Erian?
Thanks
From my POV instant messaging is the only tool from this 4 answers that allows real time
communication between more people.
These are correct answers. Flow control provides a mechanism for the receiver to control the
transmission speed, so that the receiving node is not overwhelmed with data from
transmitting node.
global unicast
link-local*
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 34/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
site local
unique local
3 Which frame forwarding method receives the entire frame and performs a CRC check to
detect errors before forwarding the frame?
fragment-free switching
fast-forward switching
store-and-forward switching*
cut-through switching
number of bytes a destination device can accept and process at one time >> window size
used to identify missing segments of data >> sequence numbers
method of managing segments of data loss >> retransmission
received by a sender before transmitting more segments in a session >>acknowledgment
Took the exam today, scored over 80. There were about 15 new questions beside all those
on this page (inclusive the new ones). They helped a lot, thank you CCNA5.NET.
Took the exam yesterday, there were only 5 new Questions. I Scored 96%. This site helped
me. thanks to you guys
Took the exam today, scored very, very well, thanks guys.
There were a few questions that were different, but this was the only one i decorated
because it was the only one i had trouble solving it:
192.168.1.96/27
192.168.1.128/25
192.168.1.128/28
192.168.1.192/29
The right answer is 192.168.1.128/25; i believe its because /25 enables you to create 2
networks with 126 hosts (+2 for broadcast and subnet address), and one of them has
192.168.1.92 on it.
Its a pretty stupid question honestly, almost forces us to guess.
Name
one + 9 =
Comment
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 35/36
05/03/2015 CCNA 1 Routing and Switching: Introduction to Networks Final Exam – 26 new questions | CCNA5.NET Exam Answers
Add Comment
CCNA5.NET => HOME CCNA 200-120 CCNA v5.0 CCNA Security IT-Essentials
http://www.ccna5.net/ccnaroutingandswitchingintroductiontonetworksfinalexam/239 36/36