Professional Documents
Culture Documents
46-38
Removing
Installing
http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.SU03.46.5 11/20/2002
Parking brake lever, removing and installing Page 2 of 6
http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.SU03.46.5 11/20/2002
Parking brake lever, removing and installing Page 3 of 6
46-39
Additional information
Note:
http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.SU03.46.5 11/20/2002
Parking brake lever, removing and installing Page 4 of 6
68
http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.SU03.46.5 11/20/2002
Parking brake lever, removing and installing Page 5 of 6
46-40
Note:
- Pull both cable sleeve adjusters apart evenly until cables are
tensioned.
While doing this, the lever must not lift off at the brake caliper.
- Remove screwdriver from compensator and apply parking brake firmly
3 times.
http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.SU03.46.5 11/20/2002
Parking brake lever, removing and installing Page 6 of 6
46-41
Note:
The colored O-ring -1- must not be visible. This ensures that the parking
brake cable adjustment mechanism is sufficiently protected against dirt
and water spray.
- Check parking brake tension and adjust fine adjustment -A- in or out if
necessary.
http://127.0.0.1:8080/audi/servlet/Display?action=Goto&type=repair&id=AUDI.B5.SU03.46.5 11/20/2002