Professional Documents
Culture Documents
Componentry.
3 JCB JS500s boast the best components in
the industry, including Isuzu engine, ITM
running gear, Kawasaki pumps and Kayaba main
2 control valves. 3 3
Structural strength.
4 The new retractable undercarriage of the JS500
combines ease of transportation with great stability.
5 6
Upping output. 2
Stability, hydraulics
and attachments.
4 JCB’s innovative hydraulic regeneration system
means oil is recycled across the cylinders for faster
cycle times and reduced fuel consumption.
Visibly better.
1 A 70/30 front screen split
gives JCB JS500’s excellent A balanced slew and electronic/
hydraulic controlled slew braking
front visibility. A clear view of the
give speed and precision.
front right track provides easy, safe
trench digging and manoeuvring.
4 5
6 7
SERVICE INTERVALS
A
Engine oil
and oil filter Every 500 hours By using graphite impregnated bronze
bushes, we’ve increased the JS500’s boom
and dipper greasing intervals to 1000
Here to help.
3 The easily-accessible Advanced Monitoring
3 4 5
K
L
Alternator 24 volt, 50 amp.
C A
TRACK DRIVE
D B
Type Fully hydrostatic, epicyclic gearbox, three speed with autoshift.
Service brake Hydraulic counter balance valve to prevent overspeeding on gradients.
STATIC DIMENSIONS
Park brake Disc type, spring applied, automatic hydraulic release.
A Track length on ground m 4.36
Gradeability 70% (35 degree) continuous.
B Undercarriage overall length m 5.35
Travel speed – high 4.65 km/h.
C Track gauge m Retracted 2.40 / Extended 3.05
Travel speed – mid 2.82 km/h.
D Width of tracks 600mm shoes m Retracted 2.99 / Extended 3.65
Travel speed – low 1.96 km/h.
D Width of tracks 700mm shoes m Retracted 3.09 / Extended 3.75
Tractive effort 36,660 kgf.
D Width of tracks 800mm shoes m Retracted 3.19 / Extended 3.85
E Transport length 2.5m dipper m 12.06
EXCAVATOR END
E Transport length 3.36m dipper m 12.02
The EMS (Easy Maintenance System) is a revolutionary lubrication system that radically simplifies maintenance.
E Transport length 4.0m dipper m 12.04 Using the graphite impregnated bronze bush’s, it is possible to extend the excavator end lubrication intervals to 1000 hours from 50 hours.
F Transport height 2.5m dipper m 3.52 Monoboom is standard on the JS500 along with a choice of 3 dipper lengths to suit the requirements of reach, dig depth, loadover height
F Transport length 3.36m dipper m 3.44 and tearout. Reserve strength is built into the fully welded structures for hydraulic hammer’s and other tough operations. Heavy-duty
reinforced bucket tipping links are provided as standard.
F Transport length 4.0m dipper m 3.49
G Counterweight clearance m 1.45
CAB
H Tailswing radius m 3.64
Excellent digging, loading and positioning visibility results from the careful design of front, side and roof lights. All screens are tinted to
I Overall width of superstructure m 2.99
improve in cab conditions.
J Height over cab m 3.43 Fully opening front screen is very smooth to operate and as the lower screen is stored in rear of cab.
K Ground clearance m 0.77 Fresh air ventilation available from opening door window, opening slot in front screen and fully opening front screen.
L Track height m 1.20 Parallelogram wash wiper for upper screen ensuring good wiped area for maximum visibility. Wiper motor is fitted in the left hand side of
M Tail length m 3.64 the roof screen so as not to affect bucket visibility when loading. Optional lower screen wiper available.
Fresh air ventilation and heater with windscreen demister. Infinitely variable blower speed, temperature and recirculation control. Optional
climate control. Fully adjustable deluxe suspension seat with arm rest adjustment and backrest recline. Optional radio with digital tuner fitted
into the roof lining for maximum protection. Conveniently placed radio mute button incorporated into lower console. 12v power point and
mobile phone holder built into the right hand console. Courtesy light can be operated from ground level and is illuminated for five minutes or
until switched off improving operator access at night. Cab mounted roller blind protects operator from suns’ glare through front or top screens.
SPECIFICATION JS500 LC HYDRAULIC EXCAVATOR
Double acting type, with bolt-up end caps and hardened steel bearing bushes. End cushioning is fitted as standard on boom, dipper and B
G
bucket rams. 11
Dimensions Boom Dipper Bucket
10
Bore 160mm 180mm 160mm
Rod 110mm 130mm 110mm 9
Stroke 1580mm 1910mm 1306mm
8
Filtration
The hydraulic components are protected by the highest standard of filtration to ensure long hydraulic fluid and component life. 7
In tank 150 micron, suction strainer.
6
Main return line 10 micron, fibreform element.
D
Plexus bypass line 1.5 micron, paper element. 5
Pilot line 10 micron, paper element.
4
Hydraulic hammer return 10 micron, reinforced microform element. E
Cooling 3
Cooling is provided via a full return line air blast cooler with anti-block wavy cooling fins.
2
Up to 100% engine power and 100% flow. Gives variable power and speed depending on
1
the operator’s input, matching the demand for output and efficiency to the job. Power boost is
A (Auto)
automatically activated in this mode should hard conditions be encountered. Auto idle cuts in after 2
a period of inactivity (between 5 and 30 seconds as set by the operator).
F
E (Economy) 80% engine power. 95% of hydraulic flow maximises economy while maintaining excellent output. 3
C
P (Precision) 55% engine power. 90% of hydraulic flow for fine control of grading operations.
4
L (Lifting) 55% engine power. 63% of hydraulic flow with permanent power boost for maximum lifting.
5
7
12 11 10 9 8 7 6 5 4 3 2 1 0
JS500 LC HYDRAULIC EXCAVATOR SPECIFICATION
LIFT CAPACITIES – DIPPER LENGTH: 3.36M, MONOBOOM 7.1M, NO BUCKET, 9.5 T COUNTERWEIGHT, 600MM TRACK SHOES. JS500 MONO
Reach 2m 3m 4m 5m 6m 7m 8m 9m 10m Capacity at Max Reach
LIFT CAPACITIES – DIPPER LENGTH: 3.36M, MONOBOOM 7.1M, NO BUCKET, 9.5 T COUNTERWEIGHT, 700MM TRACK SHOES. JS500 MONO
Reach 2m 3m 4m 5m 6m 7m 8m 9m 10m Capacity at Max Reach
Lift capacity front and rear. Notes: 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values.
2. Lifting capacities are based on ISO 10567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.
Lift capacity full circle. 3. Lift capacities assume that the machine is on firm, level ground.
4. Lift capacities may be limited by local regulations. Please refer to your dealer.
SPECIFICATION JS500 LC HYDRAULIC EXCAVATOR
LIFT CAPACITIES – DIPPER LENGTH: 3.36M, MONOBOOM 7.1M, NO BUCKET, 9.5 T COUNTERWEIGHT, 800MMM TRACK SHOES. JS500 MONO
Reach 2m 3m 4m 5m 6m 7m 8m 9m 10m Capacity at Max Reach
LIFT CAPACITIES – DIPPER LENGTH: 2.48M, MONOBOOM 7.1M, NO BUCKET, 9.5 T COUNTERWEIGHT, 600MM TRACK SHOES JS500 MONO
Reach 2m 3m 4m 5m 6m 7m 8m 9m 10m Capacity at Max Reach
Lift capacity front and rear. Notes: 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values.
2. Lifting capacities are based on ISO 10567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.
Lift capacity full circle. 3. Lift capacities assume that the machine is on firm, level ground.
4. Lift capacities may be limited by local regulations. Please refer to your dealer.
JS500 LC HYDRAULIC EXCAVATOR SPECIFICATION
LIFT CAPACITIES – DIPPER LENGTH: 2.485M, MONOBOOM 7.1M, NO BUCKET, 9.5 T COUNTERWEIGHT, 700MM TRACK SHOES. JS500 MONO
Reach 2m 3m 4m 5m 6m 7m 8m 9m 10m Capacity at Max Reach
LIFT CAPACITIES – DIPPER LENGTH: 2.485M, MONOBOOM 7.1M, NO BUCKET, 9.5 T COUNTERWEIGHT, 800MM TRACK SHOES. JS500 MONO
Reach 2m 3m 4m 5m 6m 7m 8m 9m 10m Capacity at Max Reach
Lift capacity front and rear. Notes: 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values.
2. Lifting capacities are based on ISO 10567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.
Lift capacity full circle. 3. Lift capacities assume that the machine is on firm, level ground.
4. Lift capacities may be limited by local regulations. Please refer to your dealer.
SPECIFICATION JS500 LC HYDRAULIC EXCAVATOR
LIFT CAPACITIES – DIPPER LENGTH: 3.99M, MONOBOOM 7.1M, NO BUCKET, 9.5 T COUNTERWEIGHT, 600MM TRACK SHOES. JS500 MONO
Reach 2m 3m 4m 5m 6m 7m 8m 9m 10m Capacity at Max Reach
LIFT CAPACITIES – DIPPER LENGTH: 3.99M, MONOBOOM 7.1M, NO BUCKET, 9.5 T COUNTERWEIGHT, 700MM TRACK SHOES. JS500 MONO
Reach 2m 3m 4m 5m 6m 7m 8m 9m 10m Capacity at Max Reach
Lift capacity front and rear. Notes: 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values.
2. Lifting capacities are based on ISO 10567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.
Lift capacity full circle. 3. Lift capacities assume that the machine is on firm, level ground.
4. Lift capacities may be limited by local regulations. Please refer to your dealer.
JS500 LC HYDRAULIC EXCAVATOR SPECIFICATION
LIFT CAPACITIES – DIPPER LENGTH: 3.99M, MONOBOOM 7.1M, NO BUCKET, 9.5 T COUNTERWEIGHT, 800MM TRACK SHOES. JS500 MONO
Reach 2m 3m 4m 5m 6m 7m 8m 9m 10m Capacity at Max Reach
Lift capacity front and rear. Notes: 1. For lifting capacity including bucket, subtract total weight of bucket or bucket and quickhitch from above values.
2. Lifting capacities are based on ISO 10567, that is: 75% of minimum tipping load or 87% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.
Lift capacity full circle. 3. Lift capacities assume that the machine is on firm, level ground.
4. Lift capacities may be limited by local regulations. Please refer to your dealer.
18 JS500 LC HYDRAULIC EXCAVATOR
JS500 LC HYDRAULIC EXCAVATOR 19
ONE COMPANY, OVER 300 MACHINES.