Professional Documents
Culture Documents
To enter maintenance mode just press "menu" in the touchscreen then press * 2864 on
the numeric pad
These steps are written assuming that your printer is on, ready to print and any
cards currently plugged into your media card centre have been removed (if
applicable).
First of all remove the power cable from the printer and hold down START.
Now re-insert the power cable with START still held down. Keep START held until
�Please Wait� appears and then release.
To enter maintenance mode just press "menu" in the touchscreen then press * 2864 on
the numeric pad
Your purge counter is now reset and you should notice the error message is gone,
allowing you to print once more. If the error message remains it would appear
something has gone wrong with the reset procedure. In which case I would recommend
going through these steps again taking great care to follow them exactly. If it
persists please let us know.
for:mfc j6520:
Press the 8 and 0 keys in this order
Press the mono Start
Codes: 99 exit maintenance mode
09 printout nozzle test pattern
76 Purge Operation