Professional Documents
Culture Documents
Technical Service Bulletin: I (I (I (I (I (
Technical Service Bulletin: I (I (I (I (I (
MITSUBISHI
MOTORS
Technical Service Bulletin
SUBJECT: No: TSB-15-23-001
F1 CJC/W1 CJC CVT-ECU CODING PROCEDURE DATE: February, 2015
MODEL: 2015 Outlander Sport/
RVR
CIRCULATE TO: l[JGENERALMANAGER I[X l PARTS MANAGER I[X l TECHNICIAN
[ X] SERVICE ADVISOR I[X l SERVICE MANAGER I[X l WARRANTY PROCESSOR I[ l SALES MANAGER
PURPOSE
The 2015 Outlander Sport/RVR with 2.0L engine is equipped with a new version of the Continuously
Variable Transaxle (CVT), designated F1 CJC (FWD) and W1 CJC (AWC). When the valve body, CVT
assembly or CVT -ECU (ECU) is replaced, the ECU must be initialized to the valve body using the
information provided in this TSB
AFFECTED VEHICLES
2015 Outlander Sport/RVR 2.0L engine (F1 CJC & W1 CJC transmissions only)
BACKGROUND
The F1 CJC/W1 CJC CVT valve body is manufactured with unique coding. In order for the valve body and
ECU to recognize each other, technicians must initialize the ECU with the valve body serial number when
the ECU or valve body (including CVT assembly) is replaced. The information coded into the ECU must
always match the serial number from the valve body.
When replacing the ECU, use the MUT-III to copy the existing valve body information from the ECU being
replaced to the MUT-III, then reverse the process to load the saved information to the new ECU. If
communication with the valve body is not possible, use the steps in the "Learning Procedure (Valve Body
and CVT Replacement)" instructions for downloading the coding file from the MDL, then upload the file
to the ECU.
When replacing a valve body or CVT assembly, you must first download a coding file specific to the valve
body from the MDL to any non-MEDIC PC or laptop, then copy it onto your MEDIC PC and load the
information to the ECU.
The serial number includes the manufacturer's part number and a manufacturer's serial number along
with other characters. They are located on the valve body and CVT case as shown in the following
illustrations. The serial no. on each part includes a 2 digit year designator (e.g. 14).
!! IMPORTANT!! The year designator is not used when entering the serial number on the MDL. For
example, in this case, the valve body serial number, Y626308-14, is entered as Y626308.
The serial number on the CVT case, Y14626308, is also entered as Y626308.
Serial number location on
CVT case/bell housing
r.=========:::;--r===;E~XA;";;"";"M;;:P;';"'L~E====r,
Part No. = AA90A EXAMPLE
Serial No. = Y14626308 Part No. = AA90A
Serial No. = Y14626308
Part No. Serial No. NOTE: The serial no. format on the valve body is different than the serial
AA90A Y626308 number format on the CVT case. If the valve body serial number reads
Y626308 -14, the CVT case will read Y14626308.
PROCEDURE
EQUIPMENT
The following equipment is needed to initialize the CVT -ECU.
• MEDIC Laptop/Tablet computer with NC power adaptor - 520924, or FZG1 MK2.
• VCI (Vehicle Communication Interface) - MB991824 or
VCI LITE - MB992744
• MUT-111 main harness'/\ (blue connector at the DLC end) - MB991910.
• USB 2.0 cable - MB991827 OR MB991827.
... u:i,e,_,,,..,"°'.,~J.u..-, ~
S---lo!C...LIIIIIIII_..,_ 1MW,.c'1+Hl 't.CJ.-I.IN,~, ~
•~ia.~iilli.....r...cw-.~
[ ~ " I l l .... !11111!"'-t t i ~
Page 3 of 16
TSB-15-23-001
I m
_,. Mo-!!01Y-Nr O
@
up te.2005MY
Frosti2(106t.1Y
4. If the "Vehicle information" does not match the vehicle
being repaired, click on the car icon at the bottom of the
page.
' ~ u:':.AT!"evmc..ss't "'"'
' . RUIS E COIHROf_
= If the "Vehicle information" does match the vehicle
' =-c:Ps.~ws
.... being repaired, continue with the proper initialization
s ~ 6$.AS-CASTOV.1.$$
procedure for the repair.
SR$-AIR8"-G
'
'
'
•
"'~ °, cs"""""
,'lll lel"
~..,.., For CVT -ECU Replacement - page 4
For Valve Body or CVT Replacement - page 8
~ en~ A~ S-or
"
- I
/J_
,u Ill~
llllfllJ the ....tiM1;lnlormllion1tia1 l It dh19r~ Md.
ai!. !I 11 = 0 1 11
I IPlHW~
-~-
~ r=r=cc1••••m1
Page 4 of 16
TSB-15-23-001
, -"· ll«ltl'I'. .:
® •"'"°'""~'
0 .-,w
When replacing the CVT -ECU, perform the following
,
IR
a.c..t.T,cvJIICS"SI
3 ·--
~l,"3,EQ:)l:m:,':\ P~ t~ !CK,i:rv.,•i«_~ ~T"I ~ 1. On the "System List," highlight ELC-AT/CVT/TC-SST.
' :.CPS'A\\IS •-'«It!!~• i,.,,
Click the check mark at the bottom of the page.
'
fes:ASC!...'S?C:.\'.-SS. i<'-"'='"'-"
'
• fm-"" "-"'
.,.
. ~-·-
' ~ 1 Coodi1m:::.1
• -I
1(1 ~ i:-ttir(I Arf'),4 ~
S.:+<!--.-.::·~.,....
;I fl_
@ ll i!:a II 11 -· II 1 I o/ IJ.s.. ~J i, i,
2. Select Special Function
. ·-
ILCUC'nrf't;ILI ./
4. Select "Calibration value Read&Save."
Click the check mark at the bottom of the page.
5. This page will appear and the serial number will display
after a few seconds.
Click the check mark at the bottom of the page.
C'AoNll11111'4btRMOI.S,,.,O
ca!h'<lt i>n'l.;iliJB.flt'S 9l J
--------· &
--
~
1-N t:"•M-..,,,.,_.,.,-,,,,.,.,c,,.;.1>,nM /J
il ,(ii), ll e:, 11 11 ~ ,i 111 I I v i, is;· rc:,.., i,~ ,, I
Page 7 of 16
TSB-15-23-001
r "" ~KK2_F'_l~,.M9'1,\_'fti2G300_14102,l.bg I
I
\!) Calibration va lue writing
IJ~ IE( II II II I -
,----i..
........ ,
l:!:.t'«l'N '"•r,nr.r~•..r,.,...,r.,.;b...,,,,..,
...... .,,,
~~
.~~~
____
- - - - - i ,,
;
; NOTE: When successfully completed, the gear
selection SHOULD be displayed in the MID .
Click the check mark to clear the pop-up .
19. Turn the ignition switch to the LOCK (OFF) position.
20. Perform the final learning step. The following conditions must be met for approximately 90 seconds.
You will not be advised when complete.
a. To teach the system a meeting point. All of the following conditions must be met for approximately
90 seconds.
• The vehicle is stationary. • The brake pedal is depressed and held for the
entire procedure.
• There are no abnormalities in the CVT or
related components. • The accelerator pedal is released for the entire
procedure.
I"~-
IMPORTANT" I
.. When replacing only the TCM, DO NOT complete "Clear CVT 011 Degradation . . .
Level" beginning on page 15. CVT oil degradation should only be cleared if the CVT fluid is
replaced.
Page 8 of 16
TSB-15-23-001
- .... . If you are asked if you want to open or save the file
select "Save" and the file will be saved on your PC's
desktop
if•! "-
~ Access 10 '"•'ffl. rnrts,uhtsl:l!c<lrs..tom_
• 4. Connect a USB flash drive (thumb drive) to the USB
port on your PC.
lancer sportback
5. Copy the file to the USB flash drive using Windows
£1 suv1c, Explorer (drag and drop).
• Vel"llcl1 Information I Malnt•na...
• Clltm EnU)' E-R1pom •
• Cu1t0mer R1lation1- Sy1t1m
• T•chlln• Sy1tem
l'.) S1IH S1Nlce t'} P.am 6. Click the icon at the bottom of the page to safely
0 Finance t'J Bu1-ln1H
• Mittoubi,t,1 Ac::itd1my.com
• PJ!oto5 Roqi1,1l,..d Condition Entr."
SelecUChck des-"ed depa,trnen\ remove your flash drive from the PC.
• 6 Lob"' Opo,..Oon T,mo (LOTS)_ 1~ 1
• Tech Talk N,;iwsletters ~ -'CJiJje'(I
• 13. W.;un:n~ Ch.art~ + MDL HElP: Mobil• FAQ
• Servlc• & Owni!r5 P1.1blic.itions • MCL HE.LP: Mastar Tutorlal
t MDL HE.LP; Ntw FHtLIN:t. FAQ
• MCL H~LP: ,-rl.fold
~ 125%. •
S--'-tlo:.J,,tw..Llolli,--'1--
fl~IMIIMM"tl•llt,wi,,(~\IJII~
T
" "'-'- --=,a- - - ~
Uai (-....i...'IK.JU!t- ~
l!!!l!M«f,t,o,"4'1'~,1,. t l l l - ~ Eil
----
-.. Ntil.tM.i ... ,..,,~ltolw.alitL, ; i
Ve,:. 31.01
_,. Mo-!!01Y-Nr
@
up te.2005MY
NOTE: If the "Vehicle information" does not match the
vehicle being repaired, follow the instructions
for Scan Tool Preparation on page 2.
' m
...... FrM12006MY
2 ~LC: -ATfCV'l')TCSSi
10. Highlight ELC-AT/CVT/TC-SST.
' . RUISECOIHROf_
=
'
s
:CP$.~WS
~6$.AS-CASTC<'J,1$$
... Click the check mark at the bottom of the page.
SR$-AIR8"-G
'
'
'
'
"'~=°"""""
... ~......
,0 ~eririo~~
13. From the pull down menu, click item No. 1: "Calibration
value reset."
14. Click the check mark at the bottom of the page.
15. Depress the brake pedal and shift the gear selector to
"R."
16. Keep the brake pedal depressed and depress the
accelerator pedal. Keep both pedals depressed.
25. Click the drive where you connected your flash drive.
"F:\Removable disk" is shown. Drive identification may
vary with different PCs.
Click the check mark at the bottom of the page.
'•=-----·.
,!; F
You will be returned to the "Write calibration value" list.
27. Click the icon at the RH corner of the Task bar on the
bottom of your computer screen to "Safely remove
hardware" to protect the data on your flash drive.
When advised it is okay, disconnect the flash drive.
28. Click on the .csv file that matches the new CVT
assembly or valve body.
= .. Vl'l·0.111Ho
DO NOT select the check box in the first column. This
is for saving or deleting a file.
f - - + - - + - - - - - - - - 1 - - - - - - - - - 1'~ 29. Click the check mark at the bottom of the page.
Page 12 of 16
TSB-15-23-001
1LC.&1'C'ilnr'i!:: 11 1
31. A message advising "Calibration value writing -
Completed" will display. Confirm the serial number
........ matches what you copied from the CVT case or valve
,:.,~ ;J;J:_J'fl,.. .,-:;,y, _~_1, .,~lli:a-.: body.
-» Clilo'~ \·,)i !.tt~'l'IY!,10 NOTE: When complete, the gear selection
SHOULD be displayed in the MID.
32. Click the check mark to clear the message and return
to the "Write Calibration Value" screen.
_,. ......... .. .... ~ :--: 33. Turn the ignition switch to the LOCK (OFF) position.
34. If replacing only the valve body, skip the following and continue to the next section.
If replacing the CVT assembly, start the engine and perform the final learning step. The following
conditions must be met for approximately 90 seconds. You will not be advised when complete.
I!!
IMPORTANT!! I 1t replacing the CVT assembly, continue to the procedure "Reset the CVT Oil
Degradation Level" on page 15.
IF REPLACING ONLY THE VALVE BODY, COMPLETE THE FOLLOWING "CONTROL VALVE
LEARNING MODE" PROCEDURE.
Page 13 of 16
TSB-15-23-001
I_
I
C-cro-ol~leilrrm;ifflOl!e-
~
"
·-
""'""
E"'Jl:i,i-r,QY(lj;/Joo
....
"''"' ...... The Data List will help you confirm the vehicle is idling
at the required levels .
A«e~:illl'.ICJSlho:'I ooo~• ~
"
!i1 ' 1"
... 5. Confirm the selector lever is in the "N" position .
" CVT ,;,11 ~~tlA"9
.,.,
I Cilek th ~ lt:e111 nar'H of ~cmm, nil !1:1 t:ui;1ce.
n 8-ltt>mibOO p~
II Q ll is ll u~ um I I ,/ I :r Iei5i l! i I
6. A message will ask you to confirm "Control valve
learning mode."
I/ah•
00
.,
00
'""''"'
f r-tu tl'.:• OK lllrt:On. to 1:-:.0::UH.
.,, .,.,
Page 14 of 16
TSB-15-23-001
v,,,,. 8. Move the selector lever to the "D" position and confirm
that "Completed" is displayed in approximately 60
.,...,,
...... seconds .
,.,,, I"-
14:2 'F
...
ON
...
""' ... f--
0 ...
OH
...
'911:tMIUI.N OFF
0
......
•I
.,, ......
, - - - -,l!!!.iii..;;,,,...,,.;,..--{,!,_,--lo=------1 ;
lf;,,iK lltlna
19. Start the engine and perform the final learning step. The following conditions must be met for
approximately 90 seconds. You will not be advised when complete.
• CVT fluid temperature; 40° - 100° C (104° • Engine speed: 500 - 800 rpm (idle)
- 212° F) must be maintained during this •
The vehicle is stationary.
step.
• There are no abnormalities in the CVT • The brake pedal is depressed and held for
the entire procedure.
or related components.
• Selector lever position: D • The accelerator pedal is released for the
entire procedure.
CearCViclll"R11B.dalJcei~
~
..-1 . - -
-"" Click the check mark at the bottom of the page.
'
" CVT,;,l~<10l'li0fl ~ 10, 258 /
I
,--
ft
-
~
-
I CIiek lh1 1t:•r11 r-i11'H of con,m1 nd , o •:ic. ~111.
~
.,..
fPrtM..,l>oiUJ ' l!/.97 .-S.-.':tu.. ~ n_... ,:,v"3rs:'5rAA,-o,., ~·.,_((!00 7 ,
ll ,ri1; 11 11i 11 ~ !1 m I al1 ;Y 1:~:E!i!H 11 I
PARTS INFORMATION
WARRANTY INFORMATION
This TSB provides technical information only. For warranty claim submission, refer to the Warranty
Labor Operations Time Schedule for labor operation numbers and allowed labor times.