Professional Documents
Culture Documents
Tela anterior
Bem-vindo: u060h73
produtos: BACKHOE LOADER
Modelo: 416E BACKHOE LOADER CBD
Configuração: 416E Backhoe Loader Single Tilt Center Pivot CBD00001-UP
(MACHINE) POWERED BY 3054C Engine
Desmontagem e Montagem
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders Power Train
Número de Mídia -RENR6475-13 Data de Publicação -01/07/2017 Data de Atualização -13/07/2017
i03664901
Removal Procedure
Table 1
Required Tools
Start By:
A. Release the hydraulic system pressure. Refer to Disassembly and Assembly, "Hydraulic System
Pressure - Release".
B. Remove the tie rods. Refer to Disassembly and Assembly, "Tie Rod (Steering) (Front) - Remove".
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for installation
purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this helps to keep contaminants
from entering the system.
Illustration 1 g01238002
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpa… 1/2
14/06/2020 416E Backhoe Loader Single Tilt Center Pivot CBD00001-UP (MACHINE) POWERED BY 3054C Engine(SEBP3706 - 85) - Docu…
1. Disconnect hose assemblies (1) and (2) . Remove bolts (4) and steering cylinder (3) .
Installation Procedure
Illustration 2 g01238002
1. Install steering cylinder (3) and bolts (4) . Apply Tooling (A) to bolts (4) and install bolts (4) . Tighten
bolts (4) to a torque of 460 N·m (340 lb ft). Connect hose assemblies (1) and (2) .
End By: Install the tie rods. Refer to Disassembly and Assembly, "Tie Rod (Steering) (Front) - Install".
Direitos Autorais 1993 - 2020 Caterpillar Inc. Sun Jun 14 2020 14:28:26 GMT-0300 (Horário Padrão de Brasília)
Todos os Direitos Reservados.
u060h73
Rede Particular Para Licenciados SIS.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisweb/mediasearch/mediaheaderinfoframeset.jsp&calledpa… 2/2