Professional Documents
Culture Documents
09 Beka Xmatic Controller S Controlling
09 Beka Xmatic Controller S Controlling
Control units
BEKA Xmatic Controller S
Description
The BEKA Xmatic S control unit is used for controling
single line systems. The lubricant is supplied to the
metering distributors via one main line. This line is
pressure relieved after the lubrication process.
Please see chapter 03 of our industrial catalogue for
basic information about single-line lubrication.
Control units
Technical data
Supply voltage: 10 to 55 V DC
Control voltage: 24 V DC
Contact load,
connection motor: max. 10 A at 24V DC
Signal output,
connection signal lamp: max. 4 W
Degree of protection: IP 40 Error message
(to be installed in operator‘s cab) The LED „ERROR“ signals the following errors:
Temperature range: -25°C to +75°C
Filling level pump: 1x flashing
1 sec.
Diagram of a lubrication cycle: The signal for „level pump“ error stops as soon as
State: 01.16EN
Pump
I
enough lubricant has been refilled.
0
I
All other errors need to be acknowledged with the
Cycle time
0 RESET button.
I
Monitoring time
0
I
Pressurization
0
I
Pressure switch max.
0
09-1-40-01
I
Relubrication time
0
I
Break time
0
1090200400
1090200400