E LoGyTEC ane e real OTE LAB REG OTS
Pagina: 1 de 2
CERTIFICADO DE CALIBRACION N° 212892
Datos Generales
Equipo TELUROMETRO
Marca Megabras
Modelo MTD20KWe
Numero de serie 2162610
Fecha de Calibracién 2021-07-06
Registro 1410117
Método de Calibracién
Por comparacién directa con nuestro Patron
Se han tomado cinco lecturas por cada valor nominal
Patrén(es) utilizado(s).
Desai [Waesere Trabia Valier
DEGADADERESISTENGA DEBAIOVALOR | B1S1C1B TNACAL Taft)
WovcTIME ELECTRONICS Corifcado NE 228-2020
Modecs051 Colbredo 2020-12
Lugar de la Calibracién
Realizada on las instalaciones de Laboratorio de Calibraciones de LOGYTEC S.A.
Calle Isidoro Suarez # 236 - San Miguel - Lima
Condiciones Ambientales
Temperatura Ambiente Huriedad Relativa
aC 60,0%#5%
Nota
Los resultados expresados en este Certificado son validos nicamente para la unidad ensayada, no
slendo extensivos a otras unidades aun cuando fueran del mismo tipo y lot.
La incertidumbre total expandida esta basada en una incertidumbre patron combinada muttiplicada por
un factor de expansion k=2 para un nivel de confianza de aproximadamente 95%
LABORATORIO
OGYTEC S.A
‘Toda reproduccién de este dacumento deberd ser integral y sin ninguna alteraciénEE LOGYTEC aa ea rpmele CTELAB-REGOTS
Pagina: 2.de 2
CERTIFICADO DE CALIBRACION N° 212892
Resultado de la calibracién
“Range Nominal Patrén Lectura: Error (Ka)
(es 50 50170 5.030 0.259% 0,588 %
| 700 70,0160 10,040 0.240% 0,580 %
aaa 500 50,0740) 4980 0.55% 0.18 %
90.0 90,1750) 90,20 0.03% 0.13 %
pea 600.0 599,524 0 597 0 “04% 02%
900.0 899,770 902.0 02% 01%
a as 5kO) 5,006 KO 5.07 ka 4.778% 084%
L iE soko 10,002 ko 9.999 0.120% 0,128 %
Observaciones
Del resultado de las mediciones se concluye que el instrumento se encuentra calibrado.
LABORATORIO
LOGYTEC S.A
Calibrado por:
Eduardo Femahdez Uifee
Laboratorio de calibraciones
‘Toda reproducciin de este documento deberd ser integral y sin ninguna alteracién= Toone greet an
(QPTENTECH) nage Earth Tester MTD-20KWe
AX. 1 (905) 813-4463,
‘wor tentech.us
[Gertfcate No- BaT68e Tune 23,2027 Page 112
Calibration Certificate
To
Equipment: Megabras MTD-20KWe.
Serial No. 2iE2610
Date of calibration : ‘oera3iz024
Calibration procedure
“The calibration procedure used was based on the recommendations of the IEC 17025 Standard, in the technical instruction
1L0014 (rev 3.1) and in the manuals of operation of the involved instruments.
Used Standards
RESISTANCE DECADE BOX |, YOKOGAWA model 2786-20 Serial number 01017, with calibration certificate
No. 174181_101 issued by IPT on 06/19/2019, validity for 2 year.
Fluke 8845A. 6% digits, digtal multimeter, sere N* 5361014 with calibration certificate N° F8S68033, issued on APRIL. 18,
2021 by Everett in accordance with the Fluke Calibration Quality System document QSD 111.0, valcity for 2 year
Fluke B845A, 6 % digits, digital multimeter, sere N® 5361016 with calibration certificate N'F8568026 , issued on APRIL 19,
2021 by Everett in accordance withthe Fluke Calibration Quality System document GSD 117.0, val for 2 year
Uncertainties
‘The conventional tue values are affected with the following uncertainties:
Voltage : +0,5%
Resistance: +0,5%
‘True Value: Value of standars (or read on standards) with declarated uncertainties,
Enviromental conditions
Room temperature: Relative humisi
a2°C | 225%
Voltage Measuremer
Maximum admissible error : + (2.% read value + 1 % ofthe full range ).
Maximum
True Value (V) Eror(V) | admissible
| error = (V)
[eaaco 301 __|
100.2 T oO 4.00
1508 [93 5.02(@PTENTECH
7920 NW 68" STREET, MIAMI,
FLORIDA 33168, USA
PHONE: +! (208) £38-0388
FAX. (05) 812-4483,
Earth Tester MTD-20KWe
(Certificate No.
Baieee
June 23,2027 |
Pager 272
Results: All test were satisfactory in this equipment.
| Maximum:
Fanos aa |Raedvaue >] erorc) | sine
2 ic 024
990 Boe 040
1.18 o7 056
84 08 | 260
100.1 dos | 400
480548 560
203 A 26.00
yor] 40.00 _|
7808 | 8 | 56.00
330
2000KQ [10 | 1024024
18 47.78 | 028
* Value expressed in the same unit showed in the range in use.
Results: All test were satisfactory in this equipment.
Withstand Voltage test: Applied 3 KV (ac ), during 1 minute and no electrical current was detected.
Used Terms
True Value: Value of standars (or read on standards) with declarated uncertainties,
Observations
‘This Certified of Calibration itis valid only forthe tested unit, not being extensive to any lots, even if itis similar.
“The reproduction of this document will only be able to be integral
All these certificates are traceable to National and International standards and are in compliance with isso/lEC 17025,
Calibrated by:
Supervisor:
Pe
Luis Chan
-
Jorge Sotolongo
‘The reproduction of this document wil
‘oni
be able to be integral.