Professional Documents
Culture Documents
SOL AR INVERTERS
— This new addition to the TRIO family, with 3 Ethernet, RS485) combined with a Sunspec compliant
TRIO-TM-50.0/60.0
outdoor string inverter independent MPPT and power ratings of up to 60 kW Modbus protocol (RTU/TCP) allow the inverter to be
(480 V version), has been designed with the objective easily integrated with any third party monitoring and
to maximize the ROI in large systems with all the control systems.
advantages of a decentralized configuration for both
rooftop and ground-mounted installations. Improved commissioning and maintenance
Thanks to the build-in Web User Interface (WUI) the
Modular design installer can commission the inverter wirelessly and
The TRIO-TM-50.0/60.0 has a modular design to change advanced parameters by using any standard
guarantee maximum flexibility, thanks to the different WLAN enabled device (smartphone, tablet or PC).
versions available. Integrated logging capability allows remote
The separate and configurable AC and DC monitoring of the plant without the need of any
compartments increase the ease of installation and additional external loggers.
maintenance with their ability to remain separately Remote firmware update of the inverter system and
wired from the inverter module inside the system. components via Aurora Vision®.
The TRIO comes with the most complete wiring box
configurations available including up to 15 DC inputs Highlights
with fast connectors, string protection fuses, AC and • 3 Independent MPPT
DC switches and type II AC and DC surge arresters. • Transformerless inverter
• Double stage topology for a wide input range
Design flexibility • Large set of specific grid codes available which can
The double stage conversion topology offers the be selected directly in the field
advantage of a wide input voltage range for maximum • Separate AC and DC compartments are available in
flexibility of system design. different configurations
The TRIO-TM comes with a forced air cooling system, • Both vertical and horizontal installation
used also in the previous TRIO products, designed for • 2 available sizes, 50 and 60 kW with 400 and 480 Vac
a simple and fast maintenance, allowing a maximum of output voltage, respectively
flexibility of plant design. The inverter comes with • Wireless access to embedded user interfaces
mounting supports for both horizontal and vertical • Ethernet daisy chain enabled
installations, which allow for the best use of space • Modbus TPC/RTU Sunspec compliant
available beneath the solar panels. • Remote monitoring and firmware update via Aurora
Embedded multi communication interfaces (WLAN, Vision® (logger free)
• Lifetime free of charge access to Aurora Vision
P R O D U C T F LY E R F O R T R I O -T M - 5 0 . 0 - 4 0 0 / T R I O -T M - 6 0 . 0 - 4 8 0 A B B S O L A R I N V E R T E R S
—
ABB string inverters
TRIO-TM-50.0-400
TRIO-TM-60.0-480
50 to 60 kW
—
Technical data and types
L2 L2 L2 N N, S N N, S
IN1- IN1-
IN1- L3 L3 L3 PE PE
IN1- IN2- IN1- IN2-
IN3- IN3-
Standard -S version
IN2+
IN2-
L1 L1, S
L2 L2, S
IN3- PE
PE
IN1A(+)
IN1B(+)
DC/DC DC/AC
IN1+ Current reading DSP DSP
contr. contr.
IN1E(+) OVP monitoring
-SX version
IN2A(+)
IN2B(+) Control circuit
IN2+
IN2E(+)
IN3A(+)
IN3B(+)
IN3+
1_RS485
IN3E(+) + T/R
- T/R
GND
IN1A(-)
IN1B(-) 2_RS485
µP + T/R
2 1 3
- T/R
IN1E(-)
GND
IN2A(-)
IN1- Remote control
IN2B(-)
+ R1
IN2-
+ R2
IN2E(-)
IN3- GND
IN3A(-) Alarm
IN3B(-) N.C
Communication N.O
IN3E(-)
platform
C
1 Inverter power module
Aux 2 DC wiring box
N.C
N.O 3 AC wiring box
C
Ethernet Ethernet WLAN
Version -SX
—
Technical data and types
1)
The AC voltage range may vary depending on specific country grid standards 4)
DCWB with display is available as optional, with dedicated wiring box version
2)
The Frequency range may vary depending on specific country grid standards 5)
Type 2 surge arresters available as optional, with dedicated wiring box version
3)
Please refer to the document “String inverters – Product manual appendix” available at Remark. Features not specifically listed in the present data sheet are not included in
www.abb.com/solarinverters for information on the quick-fit connector brand and model the product
used in the inverter
BCD.00658_EN REV. I 09.11.2018
— —
For more information please contact We reserve the right to make technical We reserve all rights in this document and
your local ABB representative or visit: changes or modify the contents of this in the subject matter and illustrations
document without prior notice. With contained therein. Any reproduction,
regard to purchase orders, the agreed disclosure to third parties or utilization of
www.abb.com/solarinverters particulars shall prevail. ABB AG does not its contents – in whole or in parts – is
www.abb.com accept any responsibility whatsoever for forbidden without prior written consent of
potential errors or possible lack of ABB AG. Copyright© 2017 ABB
information in this document. All rights reserved