Metcraft Engineering
Harohalli Industrial Area, Bangalore
GALVANISING TEST REPORT
Sr.No: MET/QC/2018-19/ 273 Date: 18.07.2018
wr
arvian/| 7.650 MT
|cusToMeR NAME: POND. Kes) |
NIEDAX CABLE MANAGEMENT |_INVOICE No/ Date 481910273/ 18.07.2018 Numpers| 727 Nos
STE VELA TADDER 300X50 Mi, PERFORATED 450X50 | SAMPLIN |. ann ioscsanvine
‘atest deserigtion | __MM,200X50 MM, 150x50 MM G Sire tenn?
TDESTRUCTIVE TESTS
|LPREECE TEST
IS 2633:1986 (Standar:
lo copper deposit to be found)
{Srne. of Sample ‘surkace Area Rest piece) No, of one minute dip 7 Remaris ‘
a {042.6100 mm long, aoe "No copper deposition found
2. STRIPPING TEST 1S 6745:1972(standard: 460 gms/sq.m)
Type of the sample Galvanized sample [Black [Coating Tear
(est piece) surface Area wt weight weigh eae
'50x2.81100 mm long, 0.0109 308.275 seazs | 61s | sea? ems/motersquare
WNON DESTRUCTIVETESTS
|LHAMMER TEST/KNIFE TEST
15 2629:1985 (Standard:No peeling to be observed) _
i TESTS AREAS
“ype of the sample (Test piece) : ; a —_—
02.5100 mm long no peel otf no peel ott no peel off ro yeeting s found
2.ELCOMETER TEST 1S 3203 1982(Standard: 65 microns Minimum)
uo. of Sample Reading in Microns at the test areas Remarks
a 3 c an F é # 5
ir nm | oe | | os | 73 [6 ss aexepied
e sf | a | at | 2 | = | ‘accepted
(Upto 75 nes) nm [| [| | | | accepted
le [66 | 3s | 7s [7 | 6 | a | 79 accepted
'sQSte Tai eos) a a accepted
6 73 [5 | | ot | | | 7 | 6 ‘accepted
7 7% |e | 7 | 2 | os | 75 | 68 | 7 ‘accagted |
[stort ison0s) [70 | 06 | 2 [| 66 | 70 | es | oo [or accepted
2 wo [2 | # | 7 |e | 2 | 7 | 66 ‘accepted
a0 7 | 70 accepted
a | 7% | 79 |e» | 75 | 7 [69 | 78 accepted
iz 7 [66 | 69 | yo | 2 | os | 70 | 69 accepted
ashisitestones) a accepied
ha m_ |e [6s | 6s | | | 7 | 79 accepted
a5 [7] | 6 [9 | os accepted
ie [| ee] 6 |e | | accepted
7 a @ | 6 | 70 accepted
he 7p apes [es es te accepted
as 70 [69] | | 6 | | | 8 accepted
[206019 1000n03) | 73 | 70 | 7 | 7 | | 7 | si | 7 accepted
‘Quantity tobe
quantity Accepted | __ reworked Remarks
apres ‘Accepted sill accepted
removed trom the mate
ence the test piece is used for thi
Js conducted on principal materia
‘Note: Testing i done on Test plece Which is aiiached te the prindlple material during hot dip galvanizing. This is done as the principle material