Anet
3D PRINTER
E1 6 User ManualAnnet E16 User Manual
CONTENTS
PREFACE 3
41. Use Instruction 4
2. Installation Instruction 4
58. Spare Parts Lis 5
4. Parameter 5
5. Name of Parts 6
6. Installation 6
6.1 Verical Frame installation 6
6.2 Power Supply Box Insalaion 7
5.3 Machine Cable Connection 7
5.4 Voliage Seting 8
55 TF Card installaton 8
7. Machine Functon Inteduction 8
7.4 Operating Intertace 8
7.2 First Printing 8
7.3 Unload Filament 1"Annet £16 User Manual
PREFACE
Dear customer:
“Thanks for choosing ang using Anet 3D printer. For your convenience, please read the instructions carefull before using them and fllow the instructions
sey
E16 30 printers @ melt deposition molding pracess, which can print 30 models and so on designed by computer inte real objects
‘Special Version:
1.Allthe contents inthis manual have been checked careful If there fs any misprint or misunderstanding ofthe contents, Anet reserves the right to interpret
2. This user manuals for reference only and dows not consttute any form of commitment.
2. tis recommended to use Anet orginal flament,Anet
So printer £16 User Manual
1.Use Instruction
In order to prevent damage to you and others in the process of using, please pay attention tothe folowing items!
# Please do not attempt 0 use the machine in any way not described in the insiuctons to avoid accidental personal injury and property damage.
+ Please do nol place this machine near inlammable an explosive atic or high heal sources. Please place his machine i a ventilated, cool and dust
free environment
+ Please do nol place the printer on a platform with high vibration or other instabily. The shaking of the machine wil affect the printing quay ofthe printer.
{Please do not replace the power cord of ether products during installation. Please use the orignal powerline supplied withthe machine. The working
ower supply uses 110V/220V AC. The power plug must be plugged into the three holes socket with ground wire lo avoid damage to components
fccigents such as fre and electric shock.
* Please do nol touch the nozzle and heating bed wile the printer is working to prevent high tomperature burns and persona inary.
* Please do not wear gloves or wrappers when operating the machine o prevent the mavable pars from causing rushing and cutng injures to personal
pats,
* After pring, use the remaining temperature ofthe nozzle fo cleanup the flament onthe nozzle with the help of tools. De rt touch the nozzle erstly
wth your hands during cleaning o prevent scalding
*# Use a shovel carefull to avoid personal injury when removing model
* Please often does product maintenance. Inthe event of power failure, regularly cleans the printer body with dry cloth to wipe away dust and bonded
printing materials, foreign objects on guide rails, and hibricating oll is recommended fr sliding pars, screw rods and bearing parts.
* Children under 14 years of age or etry people over 60 years of age, please use this machine under the adult people to avoid persona injury.
‘The 3D printer were tested twice before delivery, some fat resicul lament may flaw out as atthe beginning of use, please feel fee to use them
* Its recommended to use £16 in a well-ventilated environment Please cutoff the power supoly after using,
2 Installation instruction
+ Please make sue the packing is intact belore receiving the goods.
{After unpacking please check carefully whether the pats ist is consistent with the physical pars.
* Ifyou have any problems, please contact your supple or Anetin time.
* Pictures in this manual ars for your reference, please take the object asthe standard
°3 Annex List
4 Parameter
£16 User Manual
le, PERE
Module support automaticaly Optonal
Temperature 040°, Humaty 60%
3 4 onesie sox | 1 [12 ES)
ect coer poction 000mm | Pers we 1080389
7 ee
OT el ere
[Aitention: Pictures in this manual are for your reference, please take the
‘object asthe standar.
hems 9-18 inthe annexlist and toughened glass are gs and do net enioy
the warranty poly.
eAret
E16 User Manual
5 Name of Parts
eblowee
ent racket Case mitsweh
Heating bea
Powersupply box
Leb sreon
Resetbution Zane lit ante Adjusting sere
Petre + Frontier
Scout Ea motor
Let 2 als motor
Fight 2 as moar
Y¥ ais gi 08
6 Installation
6.1 Vertical Frame Installation
1. Place the frame on the chassis and align the screw holes, insert the 4
'MS*20 serews from the Bottom to connect the vertal frame and chassis,
‘and then tighton the s
2, Tighten 2 M6"8 hexagon socket screws to complete the vertical frame
installation, as shown in picture 4
cooks 2 = —
Pee 3 Pctre 4 nstallaton completion degraAret
E16 User Manual
6.2 Power Supply Box Insalation
1. Putthe filament holder kit1 on the power supply box and lock it with
'Ma"10 serews, the flament holder kt 2 is installed on the filament holier
ket 1 as shown in picture 5.
‘The aviation connector connecting cable and power cable are inserted
into tho main body ofthe pow
6.3 Machine
Cable Connection
1. According tothe cable label Sheet 2, wie the cable label one by one with
the label on te machine
2, Heating bed cables are wired as shown in picture 7.
box, as shown in picture 6. Labelname] _Cablelabel [Labels on the machine] _ Remark
Motor Label | esr or ae Aer | Wenn.
Me 10 screw ai 2 ra Fiaizeroer | meta is
5 Cd es
aba!
a ates Dasownin pare?
Sheets
Attention:
Cables with
Hotoed lel . sieming vee
is inserted in iostoa
the locations
shown.Annet E16 User Manual
6.4 Voltage Setting 7 Machine Function Introduction
‘Adjust the vaiage according tothe lacal mains input standare 7.4 Operating Interface
Actual ompertue Tegel tempers Target terparature
‘texmuser ofestuter of heating bod Rotary baton
‘etal temperate (Rotate and
insingveg igi repesents
salcton, press
nv ace represents
Slide switch ae confimaton)
Speed Petng ere
Attention: according to the local mains input requirements, the power
‘supply tothe [positon ofthe toggle suvch is MOV, and othe right
position is 220V.
6.5 TF Card instalation Phew 10
7.2 First Printing
7.2.1 Machine leveling
+ Install tougnened glass: pros the rotary button to enter the main menu,
click "Prepare" —" Move axie”—-" Move 2°» Mave 10 mn, turn the
‘Take out the TF card and inser the TF card as shown ln picture 3
= rotary button clockwise to raise the Z axis by about 20 30 mm, and place
lass on tho heating bed and fx it witha clip.
TF card TF socket 2. Auto home: press the rotary button to enter the main menu, select *
ate Prepare’ —-” Auto Home" and the machine sar fo move towards he
Postion ofthe iit switch unt the machine stops moving, as shown in
picture 11E16 User Manual
3. Disable steppers: press the rotary button to enter the main menu, select
Prepare” > “Disable stopper
4. Marual leveling: moving the nazze to the heating bed and observing the
distance between te nozzle and the heating bed from the font of tho
‘machine shown in picture 12, ifthe distance between the nozzle and the
four comers ofthe heating bed is 0.1 mm (the thickness of a proce of A¢
paper, AA paper can pass through the gap and feel slight resistance ),
leveling is not required, I the distance between the nozzle and the four
comers of the heating bed is greater than or less than 0.1 mm, adjust it
according to stop 6.
“The distance between the
nozzle and heating bed,
5. Adjust the distance: fine-tune the * distance * so thatthe its szeis about
0.1 mm to moet the printing requirement. Move the nozzle to the other three
comers of the heating bed, and adjust tne spring compression ofthe four
corners ofthe healing bed in ane direction (clockwise or counterclackwsa)
(shown in picture 13), so that apiece of Aé paper ( about 0.1 mm ) can pass
through this distance and fel sight resistance, and there is no scratch on the
platform when moving the extruder (picture 14).
‘gusting see00
_Ntorton: ting the rt courerlock
wise is bh an turing the rut
Cocke loos.
‘toto: # pape can pass
veugh he gap beeen he
four eames noses of the
hosing Be andthe heating
bod wih sight rossance.
7.22 Lose
1 Machine preheating
Before loading flament, the machine needs fo be preheated. The folowing
picture illustrates PLA flament as an example, and the operation is as folows.
‘Operation method: press rotary button —"Prepare’-"Praheat PLA’—+Pre-
hheat PLA’, the machine starts to warm up (a this time totus to the main
interface and the macrine is warming vp).inet
‘The heating bes ane exter
ach he target target
‘AXtenion: f you want lo print with ABS lament, you must seloct”
Preheat ABS" fr preheating
2, Load Filament
Load flamont automatically
41) Aro of PLA flament: lament specications: Diameter:t.75mm;
Materal: PLA; Prtng temperature: 200-230 ¢
2) Please press rotary button —Prepare’—+"Change filament’ the main
interface will dsplay “Heating nozzle Please walt.stho interface wil
splay “Wait for start ofthe flament change” ate the nozzle temperature
Fises to the target temperature ~»"Wait for flamont unload” "Inset
fiament and press button to continue. then please press rotary
baton
3) Straighton up the lament (or eu the filament into bevels with
plia)then pass the filament trough the extruder
44) Meanwhile the main interface wil display “Wait for flament load"
“Wal for flamont extre", please click "Resume print to stat pening
5) Ifthe nozzle has flament outflow, tho installation of filament is
success he installation of flament isnot successful, please select
“Extrude mocetoro-load.
E16 User Manual
Wit for start of
the flament change
Heating nozzle
Meeting nox Wat for flament unload
Inert lament and press
Wait for flament extrude tet Samet mp
Wait for flament load
Resume print
Extude more Psu 18
[Atention: The function of aulomatic material advance and retreat is caried out
‘coring tothe steps of material return frst ané materia feed Inter, when the
frst printing has not slartodinstaling filament yo, please wail for 13 minutes.
‘er the interface asplays “Insert flament and press button to continue" nsert
fiament ito the extruder for automatic feesinginet E16 User Manual
3 Printing
1) Ate leveling is completed and te filament is installed successfull, press the “Remove made!
‘eaary button te erver the main menu, prose "Pint from SO —+° Malte and Alter the mode printing is finished, the madel i shoved down against
‘select the fle under" Main® to stat prating for tne frst time. the glass surface with @ shovel, as shown in picture 20.
Sa
2. In the process of printing ,f you want to pause printing, please press the rotary
button to enter the main menu press" Pause print to pause pening the machine
‘stops affer moving about Som inthe z-axis and then press Resume print” Petr 20
Resume print’sthe main interface wil isplaywatl for print io resume" to resume 7.3 Unload Filament
printing, 98 shown in picture 18 Automatic unload of flament:
Mathod of automatically unloading flamont: Please pross rotary button
**Prepare"-»"Change filament’, the main interface will splay "Heating
nozzle Please wait...” walt for 1-2 minutes the interface wil deplay Wat
for start of the filament change" ater the nazzle temperature rises fo the
oe target temperature Wait for flament unload "the machine automaticaly
Petre 18 tnload flament then pulls out the filament inthe vrical direction and
‘Aitertion: you donot operate the knob after suspending printing, you willretum njgad the flamant
to the main interface in about 1 minute
3. Ifyou want to stop printing during printing, press the knob to enter the main
‘anu, press "Stop print to stop printing, press the reset button to sume normal
‘paation ofthe machine and soletto reprint the model, as shown in picture 1.
Heating nozzlo Wait for start of i fo fament uno:
Please wat, the flament change Waitfor vend
Plea 193D PRINTER
It you have any problems with the product, you can obtain the relevant services through the following channels:
Facebook ater - sales group: wuw facebook convgroupstanet3dprintersupport
‘Website: wwwanei3d.com
‘Aer ~ sales service emai anet@anetSd.com