Professional Documents
Culture Documents
G13 Close-coupled with Polypropylene G03 with Stainless Steel pump head and G13 Close-coupled with Brass
pump head ANSI RF flanges pump head
G03 Series Performance
Capacities
Flow
Max. Max. Flow
Pressure
Input @ 69 bar (1000 psi) Maximum Inlet Pressure
Model rpm gpm l/min 17 bar (250 psi)
G03-X 1750 3.1 11.7
G03-E* 1750 2.2 8.3 Maximum Discharge Pressure
@ 83 bar (1200 psi) Metallic Pump Heads:
G03-E 1750 2.1 8.1
G03-S 1750 1.6 6.3 G03-X, G03-E* to 69 bar (1000 psi)
G03-B 1750 0.9 3.5 G03-E, S, B, G to 83 bar (1200 psi)
G03-G 1750 0.6 2.2 G13 to 69 bar (1000 psi)
Non-metallic Pump Heads:
17 bar (250 psi) Polypropylene
24 bar (350 psi) PVDF
*Kel-Cell
Performance and specification ratings apply to G03 Kel-Cell and G03 Shaft-driven configurations unless specifically noted otherwise.
G03-X
3.00 11.25
2.33 8.75
G03-E
2.00 7.5
Gallons Per Minute
1.66 6.25
1.33 5.0
G03-S
1.00 3.75
G03-B
0.66 2.5
G03-G
0.33 1.25
0 0
G03 Version-10 01/22
14
PN40 DN20 DIN Flange 0 200 400 600 800 1000 1200 1400 1600 1800
1 inch Tri-clamp
Revolutions Per Minute
Discharge Port 3/8 inch BSPT Note: Positive inlet pressure required with PTFE diaphragms.
3/8 inch NPT
600lb ANSI RF Flange Suction Lift:
PN100 DN15 DIN Flange
Each Hydra-Cell pump has different lift capability depending on model
3/4 inch Tri-clamp size, cam angle, speed, and fluid characteristics. To ensure that your
Shaft Diameter G13: 24 mm (0.945 inch) hollow shaft specific lift characteristics are met, refer to the inlet calculations
G03: 22.2 mm (7/8 inch ) regarding friction, and acceleration head losses in your Hydra-Cell
Shaft Rotation Reverse (bi-directional) Installation & Service Manual. Compare those calculations to the
Bearings Precision ball bearings NPSHr curves above.
Oil Capacity 0.95 litres (1.0 US quart)
G03 Version-10 01/22
Weight
Metallic Heads: 12.7 kg (28 lbs.)
Non-metallic Heads: 8.6 kg (19 lbs.)
www.Hydra-Cell.co.uk • 3
G03 Series General Assemblies
Dimensions in mm
850
750
400 450
4x 20
292
G03 Version-10 01/22
4 • www.Hydra-Cell.co.uk
G03 Series General Assemblies
Baseplate Assembly with Motor Adaptor for IEC 100 Motor Frame
Dimensions in mm
850
750
400 450
4x 20
326
G03 Version-10 01/22
www.Hydra-Cell.co.uk • 5
G03 Series General Assemblies
Baseplate Assembly with Motor Adaptor for IEC 132 Motor Frame
Dimensions in mm
850
750
400 450
4x 20
373
G03 Version-10 01/22
6 • www.Hydra-Cell.co.uk
G13 Series General Assemblies
Dimensions in mm
850
4x 20 750
400 450
292
G03 Version-10 01/22
www.Hydra-Cell.co.uk • 7
G03 Series Representative Drawings
G13 Models with Metallic Pump Head mm (Inches)
257.6 257.6
(10.14) (10.14)
174.1 174.1
(6.85) (6.85) 196.9 196.9
4.8 (7.75) (7.75)
4.8 2X 3/8 BSPT OUTLET
(.19) (.19) Ø 10.7 17.8 17.8 2X 3/8 BSPT OUTLET
Ø 10.7 (.70)
(.42) (.42) (.70)
18.4 18.4
(.73) (.73)
4.0 Ø24.0
252.8 252.8
274.7 274.7 (9.95) (9.95)
(10.8) (10.8) 200.1 200.1
167.1 167.1 (7.88) (7.88)
(6.58) (6.58) 4X Ø 10.7
4X Ø 10.7
(.42) (.42)
3/8 OUTLET
3/8 BSPT BSPT OUTLET
Ø 22.2Ø 22.2
(.87) (.87)
36.8 36.8
81.9 81.9 (1.45) (1.45)
(3.22) (3.22)
108.0 108.0
(4.25) (4.25) 89.5 89.5
10.3 (3.53)
Ø 10.3Ø(3.53)
1/2 INLET
1/2 BSPT BSPT INLET (.41) (.41)
(Primary)
(Primary)
Dimensions are for reference only. Contact Wanner International for certified drawings.
8 • www.Hydra-Cell.co.uk
G03 Series Representative Drawings
G03 Models with ANSI RF Flanges mm (Inches)
355 266
(13.97) (10.49)
271 Outlet - 3/4 ANSI 16.5 - 600# RF
(10.68)
51
(2.01)
4.8
(.19)
225
(8.86)
Ø22.2
(.87)
108
(4.25) 89.5
(3.53)
Inlet - 3/4 ANSI 16.5 - 300# RF
20.1 127
57.4 69.9 (.79) (5.00)
(2.26) (2.75)
4.8
(.19)
Ø22.2 126
(.87) (4.98)
108
(4.25) 90
(3.53)
57 70 20
(2.25) (2.75) (.79)
127
(5.00)
G03 Version-10 01/22
Dimensions are for reference only. Contact Wanner International for certified drawings.
www.Hydra-Cell.co.uk • 9
G03 Series Representative Drawings
G03 Models with DIN Flanges mm (Inches)
361 260
(14.21) (10.24)
278
(10.94)
211 Outlet - DIN 2637 - PN100 - DN
(8.31)
44
(1.73)
Good Key
4.8
(.19)
Ø22.2
(.87)
260
(10.24)
278
(10.94)
211 Outlet - DIN 2637 - PN100 - DN15
(8.31)
44
(1.73)
Good Key
4.8
(.19)
209
(8.23)
Ø22.2
(.87)
90
(3.5)
Inlet - DIN 2635 - PN40 - DN20
G03 Version-10 01/22
Dimensions are for reference only. Contact Wanner International for certified drawings.
10 • www.Hydra-Cell.co.uk
G03 Series Motor Adaptors / Valves
125
72.7 (4.92)
110.5 (2.86)
(4.35)
58.3
(2.29)
Ø 184.1
(7.25)
Ø 243.8
(9.60)
Ø 110 Ø 120.7
(4.33) (4.75)
MAX COUPLER O.D. MAX COUPLER O.D.
Valve Selection
A Hydra-Cell G03
pumping system uses a
C46 Pressure Regulating
Valve.
G03 Version-10 01/22
www.Hydra-Cell.co.uk • 11
G03 Series How to Order
Ordering Information
1 2 3 4 5 6 7 8 9 10 11 12
G 3
A complete G03 Series Model Number contains 12 digits including 10 customer-specified design and materials options, for example:
G03XKSTHFECA.
Order Order
Digit Code Description Digit Code Description
1-3 Pump Configuration 7 Diaphragm & O-ring Material
G03 G03 Shaft-driven (BSPT Ports)* A Aflas diaphragm / PTFE o-ring
G13 G13 Close-coupled to IEC 90 motor (BSPT Ports)* E EPDM (requires EPDM-compatible oil - Digit 12 oil .
- G13 Option for IEC 80 motor connection (BSPT Ports) code J)
*Pump/motor adaptors ordered separately. G FKM
See previous page. J PTFE
4 Hydraulic End Cam P Neoprene
X Max 9.9 l/min (2.6 gpm) @ 1450 rpm
T Buna-N
E Max 6.8 l/min (1.8 gpm) @ 1450 rpm
8 Valve Seat Material
S Max 5.6 l/min (1.5 gpm) @ 1450 rpm C Ceramic
B Max 3.5 l/min (0.9 gpm) @ 1450 rpm D Tungsten Carbide
G Max 1.5 l/min (0.4 gpm) @ 1450 rpm H 17-4 Stainless Steel
5 Pump Head Version S 316L Stainless Steel
D Standard BSPT Ports (E**, S, B & G cams) T Hastelloy C
K Kel-Cell BSPT Ports (X & E** cams) 9 Valve Material
** E cam can be specified either as Standard or Kel-Cell. C Ceramic
- ATEX 2014/34/EU Certified, Category 2, Zone 1, D Tungsten Carbide
Hazardous Liquids
F 17-4 Stainless Steel
- ATEX 2014/34/EU Certified, Category 3, Zone 2
N Nitronic 50
Note: All options include Certificate, Oil Level Monitor
T Hastelloy C
or Sight Glass, Earth Stud & Secondary ATEX Label.
10 Valve Springs
6 Pump Head Material
B Brass E Elgiloy
M PVDF T Hastelloy C
P Polypropylene 11 Valve Spring Retainers
C Celcon
R 316L Stainless Steel with ANSI RF Flanges, Class
300lb x 600lb H 17-7 Stainless Steel (used with metallic heads only)
- 316L Stainless Steel with DIN Flanges, Class PN40 M PVDF
DN20 x PN100 DN15s P Polypropylene
S 316L Stainless Steel T Hastelloy C (used with metallic heads only)
- 316L Stainless Steel with Tri-clamp (1” Inlet & 3/4” . Y Nylon
Discharge) Flanges polished to 0.8 Ras 12 Hydra-Oil
- 316L Stainless Steel with Tri-clamp (1” Inlet & 3/4” A 10W30 standard-duty oil
Discharge) Flanges polished to 0.8 Ras G 5W30 cold-temp severe-duty synthetic oil
Tri-clamp options include polishing of Pump Head, J 20-wt EPDM-compatible oil
Valve Plate, Valves, Valve Seats, Springs & Retainers
to 0.8 Ra or 0.4 Ra per above, along with TSE, K Food-contact oil
Passivation, Surface Finish & Weld Procedure
Certificates
T Hastelloy CW12MW
s Selecting this option will result in a Wanner
International generated Pump Code, stamped
G03 Version-10 01/22
12 • www.Hydra-Cell.co.uk
G03 Series
WANNER
r 7 0 Countries
ners i n o v e
Part
www.hydra-cell.co.uk