Sealed Air Bai
47 April 2024
GUARANTY BY SUPPLIER OF PACKAGING MATERIALS
UNDER FEDERAL FOOD, DRUG AND COSMETIC ACT
‘As your supplier for packaging materials for the packaging of food products, we are pleased to provide
you with these guaranties.
SEALED AIR PRODUCTS CO! OF ial
PD961 ‘Acceptable for the packaging of food at room temperature or below;
approved for microwave (requires vent hole) heating applications, not to
exceed 212°F for 3-minutes. Approved for thermal treatments of fresh-cut
produce, not to exceed 212°F for 12-minutes.
‘This material is produced under Good Manufacturing Practices to ensure its hygienic quality for the
packaging of food products.
|
** Temporary exposure to heat during shrinking exempt from limitations.
In order to assist you to meet your requirements under the Federal Food, Drug and Cosmetic Act, Sealed
Air Corporation, hereby guarantees that the above identified Sealed product fully complies with the
requirements of the Federal Food, Drug, and Cosmetic Act as amended and all applicable food additive
regulations. The components in Cryovac® PD961 comply with one or a combination of 21 CFR Parts 170
199, Food Contact Notification, GRAS, Threshold of Regulation Opinion, or is Prior Sanctioned but only
for the intended use and subject to above conditions of use limitations. These guaranties are given only
pursuant to said Act and for the purpose therein stated.
|
‘The terms of the Sealed Air Conditions of Sale apply.
The customer is advised that minor adjustments in the composition of the Sealed Air products not
affecting the above guaranty may be made from time to time.
In the event of the breach of this guaranty, the supplier's liability, if any, shall not exceed the expense
which customer may incur or damage which customer may suffer by reason ‘thereof limited to the extent
of the value of such of the Sealed Air products of the ‘supplier shipped or delivered to or on the order of
‘customer as may fail to comply with said guaranty.
‘The customer retaips the responsibilty to evaluate the Sealed Air products to determine suitability for use
in the Customer's specific application.
(1/2 #0959994)