Professional Documents
Culture Documents
Date 20190424
★Product description:
The panel light uses LED SMD chips beads as the reference light source and a combination of aluminum profile
frame. Thanks for its easy installation structure & streamline design,so it can be ingenious combined with the lamp
holder.
★Application:
Suitable for homes, shopping malls, office buildings, hotels, restaurants and other indoor lighting places where
require high brightness and energy saving.
★Characteristics:
optical light distribution, no light dyeing, no stroboscopic, strong directionality, high uniformity
High light efficiency
Power conversion efficiency is high.
The lighting fixture frame is made of aluminum & the design is generous and novel.
Reflective paper, light guide plate, diffuser plate, and the light source are closely attached to the
"integral",leadting the light extraction efficiency is high.
LED PANEL LIGHT SERIES JIANGMEN ANT LIGHTING CO.,LTD.
IP Grade IP22
Working life-span >30,000H
Brown
Connect wire Blue
Yellow/Green NO
Matercial Alu.+PC
Color of lamp shell matt white
Beam angle 120°
external dimension 595*595*10mm
LED PANEL LIGHT SERIES JIANGMEN ANT LIGHTING CO.,LTD.
★ Installation instructions
1. To ensure proper operation of the product, use a power supply with a voltage within the indicated range.
2. the luminaire white frame is alu. please take care when handling and storing it. Do not press it.
3. Secure to the application site with the product bracket, please ensure stability
4. When installing the luminaire, the connection between 2 wires need be closed , and insulation measures must
be taken to prevent leakage.
5. Please find a professional electrician for installation.
★ Installation steps
1. Disconnect the power supply from the lamp holder before installation. Do not operate the power during
installation.
2. Check that the lamp holder line is normal. Then install.
3. The circuit installation adjustment check is correct, turn on the power,check whether the lamp is working
properly.
4. The above parameters are for reference only. The specific values are subject to the actual product. If the
company makes any changes, it will be subject to change.
1. Please confirm that the power has been cut off before maintenance.
2. Be careful not to clean with a corrosive solution, preferably with a dry rag.
All products manufactured by the company are guaranteed for 3 years. Under normal conditions of use, quality
assurance is based on the correct preservation of the product,Installation, use and maintenance; product damage
caused by improper installation and operation, in violation of product operating procedures, is not covered by the
warranty; Quality problems, the company will choose to repair, exchange (parts) or replace new products during
the warranty period; more than the quality warranty period will be appropriate to receive materials,Labor costs.