Professional Documents
Culture Documents
New Bronze Head Gasket PDF
New Bronze Head Gasket PDF
NOTICE
General The cylinder head gasket (part number 124030 or 124044) has
occasionally leaked in some installations. As a result of the evaluation of
the failures the material for the gaskets has been changed. The new
gaskets are made of bronze and will replace the gaskets made of stainless
steel.
There are two alternatives of the new bronze gaskets, depending on the
type of anti-polishing rings used:
See next page for information about the identification of the different types.
Instructions The change of the gasket material will not cause any change to the
tightening pressure (450 bar) of the cylinder head stud, see service letter
4612S001, issue 3.
Recommendation Mount the new type of cylinder head gasket at next scheduled overhaul, or
when the cylinder head has been removed for inspection.
In case no problem with the previous type of gasket has been noticed in
the particular installation the gaskets in the spare part stock can be used.
The sealing surface of the cylinder head and cylinder liner must be in good
condition. If grinding of the sealing surfaces is necessary please contact
your closest Wärtsilä Services office for support.
Ordering Contact your closest Wärtsilä Service office. Please specify the engine
serial number and part number when ordering.
Wärtsilä Finland Oy P.O. Box 252 (Tarhaajantie 2) Telecop. +358 10 709 1847 Tel. +358 10 709 0000 Business ID 0773744-3
Services, Vaasa FIN-65101 Vaasa, Finland Telecop. +358 10 709 1380 Registered Office: Vaasa
Wärtsilä Finland Oy P.O. Box 50 (Stålarminkatu 45) Telecop. +358 10 709 3279 Tel. +358 10 709 0000
Services, Turku FIN-20811 Turku, Finland Telecop. +358 10 709 3410
Services, Wärtsilä Finland Oy Spare Parts Notice
Issue Document No. Page
01 4612P003 2(2)
1 2 3
Picture 1.