Professional Documents
Culture Documents
STANDARD VAN
Dimensions
Exterior
Length (mm) 4890
Width (mm) 1940
Height (mm) 1920
Wheelbase (mm) 2850
Front track (mm) 1605
Rear track (mm) 1600
Ground clearance (mm) 210
Approach Angle (Degrees) 36
Departure Angle (Degrees) 27
Breakover / Ramp over angle (Degrees) 29
Drag coefficient (Cd) 0.40Cd
Interior
Front seat headroom (mm) 1020
Rear seat/2nd row headroom (mm) 1005
Front seat legroom (mm) 1075
Rear seat/2nd row legroom (mm) 870
Front seat shoulderroom (mm) 1560
Rear seat/2nd row shoulderroom (mm) 1555
Body
Body construction Chassis
Body Type 4D Wagon
Engine
Engine type Diesel
Engine capacity (cc) 4164
Engine Code/Name 1HZ
Six cylinders, in-line, belt driven SOHC, cast-iron
Engine description
cylinder block and head.
Maximum Power 96kW @ 3800rpm
Maximum Torque 285Nm @ 2200rpm
Number of cylinders 6cyl
Configuration In-line
Valvetrain SOHC
- Valves per cylinder 2v
Fuel system Indirect injection
- Fuel type Diesel
Bore x Stroke 94.0x100.0mm
Compression Ratio 22.4:1
Battery output 12V/64Ah
Alternator output 120A
Landcruiser 100 Standard
Diesel
6cyl 5 man
Drivetrain
Driven Wheels 4WD
Transmission description Five speed manual
- Transmission code R151F
Gear Ratios - 1st 4.313:1
- 2nd Gear 2.330:1
- 3rd Gear 1.436:1
- 4th Gear 1.000:1
- 5th Gear 0.838:1
- Reverse Gear 4.220:1
Differential ratio 4.300:1
Limited Slip Differential STD
4WD Specifications
Part-time 4WD. Manual free-wheeling hubs are
4WD System
standard.
Manual front wheel hubs STD
Dual Range Trans Dual range transfer box
- Transfer Gear ratio - Low 2.488:1
- Transfer Gear ratio - High 1.000:1
Centre Differential STD
Diff lock - front axle O/PAK
Diff lock - rear axle O/PAK
Steering
Steering type Recirculating ball and nut
Steering operation Power
Turning Circle at Kerb 12.0m
Turns lock to lock 3.4
Brakes
Front Brakes Ventilated discs
- Front calipers Four piston
Landcruiser 100 Standard
Diesel
6cyl 5 man
Rear Brakes Ventilated discs with single piston floating calipers.
- Rear calipers Single piston
Suspension
Front Suspension Live axle, leading arms, coil springs, Panhard rod
- Front axle Rigid, live axle
- Lower link/s Leading arm
- Suspension mounting Chassis
- Spring type Coil
- Damper type Gas
- Stabiliser bar Fixed mount
Rear Suspension Live axle, trailing arms, coil springs, Panhard rod,
- Rear axle Rigid live axle
- Upper link/s Trailing arm
- Lower link/s Trailing arm
- Suspension mounting Chassis
- Spring type Coil
- Damper type Gas
- Stabiliser bar Fixed mount