Professional Documents
Culture Documents
Mapper - Guide
Mapper - Guide
Mapper is a Mapbasic Program, which is used for viewing the neighbors of each cell
in the MapInfo.
To use this application in MapInfo please follow the Steps mentioned below:
Check the box of Use First Line for Column Titles and click OK.
Save Copy as cellsites_1 and nbrcells_1 (MapInfo table).
Close all tables.
Re-open both Tables (cellsites_1 and nbrcells_1) and Go to Table
Maintenance Table Structure.
Then Go to Mapper Neighbors Load Per Cell Pair Table and open the
nbrcells_1 table.
Go to Mapper Neighbors Click Intra Switch On.
While updating the data, the files names i.e.cellsites and nbrcells and there
column names should remain unchanged.
-------------x-------------